Hasta La Gadget!

Carolina Ferrari, Ilaria Vitali and Mengdi Xu designed Diffuse, a lamp designed to make laptop screens easy on the eyes in two ways.  Diffuse can provide complementary ambient light or it can compensate for a dark environment with a soft white light. It’s Ambilight and F.lux in one.

Diffuse consists of a felt diffuser and a wooden box containing its electronics, which are mainly an Arduino Uno, two RGB LED strips and a light sensor. The box also houses a 12v rechargeable battery and a switch between the “Eye Pleasure” and “Eye Relief” modes. The felt diffuser attaches to the box via two magnets.

To use Diffuse, you just connect it to your laptop via its USB cable, turn it on and select which mode you want to use. In Eye Relief mode, Diffuse’s light sensor will analyze the brightness of the area immediately behind your screen. The lamp’s LEDs will then emit a white light to balance the brightness of your screen and your surroundings. To use Eye Pleasure mode you also need to install an application on your laptop. The application will read the average color of your screen in real time and relay it to Diffuse, which will then match the given color.

Sit back, relax and check out the Diffuse Team’s website for more on the lamp.

While Philips did eventually bring its Ambilight technology to PC monitors, it wasn’t before others had decided to roll their own. Now you can add ambient backlighting to any computer display without any of the attendant soldering and Arduino-wrangling, thanks to the folks at Woodenshark. The team has built Lightpack, an Ambilight-esque system that’ll connect to a Windows, OS X or Linux PC and project the display’s colors onto the area surrounding the screen.

Plug the hockey puck-sized device into your computer, attach 10 LED modules to the back of your display and install the open-source software and you’re good to go. Once ready, you can even set up custom alerts to measure CPU temperature or email volumes, and even control the lighting with your smartphone or tablet. The team has asked for the unusually specific figure of $261,962 in order to fund an initial production run of 5,000 units, with early backers able to snag one of the units for $50 instead of around $90. Interested to watch it in action? There’s a video after the break, friends.

Comments

Source: Kickstarter