In a corner of the Brooklyn Navy Yard, on a factory floor that resembles an oversized assembly line, workers are building entire apartments in days. Most New Yorkers might not realize it, but the tallest prefab building in the country—and maybe the world—is currently taking shape not far from where they live. Gizmodo recently got a chance to visit the space and watch it come together.
     |
Now that you’ve been fully acquainted with Amazon’s new Kindle Paperwhite, perhaps it’s time to get to know it on a deeper level — and what better than a tear-down to do just that? The folks over at Powerbook Medic took their own unit apart piece by piece on video, highlighting what appears to be a simple process, mostly done by dealing with screws. The trickiest part seems to be pulling off the bezel, as it’s held in place with glue. Unfortunately, the repair shop doesn’t analyze the e-reader’s internal components in the iFixit fashion, but it has gone full-circle and provided a second video on how to put it all back together. Curious to see this Kindle’s e-ink-filled guts? You’ll find both videos after the break.
Continue reading Amazon’s Kindle Paperwhite gets torn-down, promptly put back together (video)
Filed under: Amazon
Amazon’s Kindle Paperwhite gets torn-down, promptly put back together (video) originally appeared on Engadget on Sun, 07 Oct 2012 19:41:00 EDT. Please see our terms for use of feeds.
Permalink | | Email this | Comments
A Reddit user found this video recorded on his brand new HP laptop. It was stored in the My Documents folder and clearly depicts the mundanity of life inside a hardware manufacturing plant. This was taken in the Quanta Chongqing Manufacturing City in Chongqing and the worker seems to be testing the camera on this particular model.
Usually evidence of this testing is wiped out. It wasn’t in this case.
Essentially, you’re looking at the face of modern manufacturing. He’s not mistreated, he’s not chained to his desk, but he’s building the same thing, over and over again, a prospect not many of us would relish. It’s a mundane view inside a fairly secret world that we as consumers rarely get to see.
We’ve seen some ambitious Blinkenwalls in our time. Nearly all of the attention is unsurprisingly focused on the wall, however, and not on the often clever hardware and software behind it. Vienna’s Metalab wants to shift the limelight by kicking it old school. Instead of the thoroughly modern Arduino and Fonera hotspot that normally light up Metalab’s 45-block glass wall, the team’s Blinken64 project swaps in a Commodore 64 with a cassette drive and the unusual Final Cartridge III feature extender. Getting lights to strobe requires dusting off more than just hardware — all the animations have to be written in assembly-level MOS Technology 6510 code that even our nerdy parents might forget. The result you’ll see in the video after the break is a far cry from the relatively easy, web-accessible hardware that normally powers such blinkenlight creations, but it’s also a testament to how relevant classic technology can remain when it’s in the right hands.
Filed under: Desktops, Misc. Gadgets
Metalab wires its Blinkenwall to run from Commodore 64, gives no word on the obligatory Tetris port (video) originally appeared on Engadget on Tue, 24 Jul 2012 00:49:00 EDT. Please see our terms for use of feeds.
Big PC companies are often seen as being at odds with the concept of custom-built computers: apart from letting us tick a few checkboxes before we order, they’d rather we not fiddle with the internals. Fujitsu is breaking the mold and embracing some of that DIY culture with its upcoming Hands-on Custom PC Assembly Service. The Japanese can take classes that teach them how to install their picks (from a limited range) of processors, hard drives and RAM. While the program doesn’t start completely from scratch — the motherboard is already installed — it takes would-be assemblers through many of the experiences of building their own PCs from the ground up. Builders can choose how many components, if they’re not quite so ambitious, and learn smart practices like wearing anti-static wristbands. While there won’t be as many unintentional jolts of electricity as the real deal, the courses should help PC owners feel comfortable working inside a computer — not to mention save Fujitsu a few technical support calls. The variable-price courses start in Japan on August 9th for multiple Esprimo desktops and a LifeBook portable. We can only hope that American PC vendors take a few hints and encourage everyone’s inner technician.
Fujitsu starts build-it-yourself PC service, lets you go homebrew without the electrical shocks originally appeared on Engadget on Thu, 05 Jul 2012 10:56:00 EDT. Please see our terms for use of feeds.
This is site is run by Sascha Endlicher, M.A., during ungodly late night hours. Wanna know more about him? Connect via Social Media by jumping to about.me/sascha.endlicher.
