SiGNa’s fuel-cell powered electric bike will run for 60 miles on a single charge. More impressive is that it runs on water.
The bike itself is really just a showcase for the fuel-cell tech from the energy company. The cells uses sodium silicide in the form of a sand-like powder. Add this to water and it “instantly creates hydrogen gas.” This hydrogen is then used to generate electricity. Because no hydrogen is stored, the cells are safe, and excess electricity is stored in batteries for an extra boost when you get to a hill. The cartridges are hot-swappable and are fully recyclable.
The main advantage (apart from the safety aspect) is that you can just swap-in a new cartridge when you need it, instead of having to stop to recharge (the units weigh around 1.5-pounds each, less than most batteries). You also get better range: a battery-powered bike typically gets 20 to 30-miles on a charge. The downside is infrastructure: you can find a power-outlet pretty much anywhere in the world. Try finding a compatible fuel-cell in a backwater general-store.
The current units can be designed to put out anything from 1-Watt to 1-Kilowatt. Their futire is probably not in electric bikes but in bigger transportation. Imagine driving your car into the gas-station, popping the hood and swapping in a fuel-cell, just Like Doc Brown drops a tube of plutonium into his time-traveling DeLorean.
Pre-orders for the cells are being taken by SiGNa. For a bike, you’ll probably have a long wait. Full, technical press release below.
Produce High-Pressure Hydrogen From Water [SiGNa. Thanks, Mike!]
See Also:
Follow us for real-time tech news: Charlie Sorrel and Gadget Lab on Twitter.
Press Release:
SiGNa Unveils The Most Energy Dense Power Solution For Electric Bicycles
Power system produces clean, safe and portable hydrogen power – zero air pollution
NEW YORK – October 5, 2010 — The race to create a hydrogen-based portable power platform sped forward when SiGNa Chemistry, Inc. demonstrated its new ultra-high-performance range extender at the Interbike International Trade Expo. This ground-breaking power platform produces hydrogen gas instantaneously and then converts the hydrogen to electricity using a low-cost fuel cell. The extender creates up to 200W of continuous power; excess energy is stored in a lithium battery for use in more energy-intensive acceleration and hill climbing conditions. A unique attribute is the high level of inherent safety as demonstrated by 3 days of continuous operation at Interbike. The hydrogen is produced at low pressure (50% the pressure of a soda can) and the only emission is water vapor.
For the rider, the extender triples the range of their e-bike with minimal additional weight. Existing e-bikes have a range of up to 20 miles without pedaling; SiGNa’s system reaches up to 60 miles without pedaling for each carried fuel cartridge. The energy density of each SiGNa cartridge is more than 1,000 Watt-hours/kilogram compared to advanced Li-ion batteries at approximately 65 Watt-hours/kilogram. The fuel cartridges are hot-swappable, lightweight (< 1.5 pounds) and inexpensive, making this a realistic solution for any e-bike owner.
“The extender uses inherently-safe reactive metal powders to produce electric power. By integrating SiGNa’s hydrogen-generation technology with an e-bike, we have demonstrated an unprecedented power solution with no greenhouse gas emissions,” says Michael Lefenfeld, President and CEO of SiGNa Chemistry, Inc. SiGNa’s range extender was demonstrated on a Pedego® electric bicycle, but it is directly compatible with most electric bicycle models.
Sodium silicide makes this portable power system possible. Sodium silicide is a safe, air-stable reactive metal powder that instantly creates hydrogen gas when it comes into contact with water. Any type of water can be used including potable water, polluted water, sea water, or even urine. Once the fuel cartridge is depleted, the rider is left with an environmentally-safe byproduct (sodium silicate) that is fully contained in a disposable or reusable cartridge.
SiGNa has adapted its award-winning powders for use in many industrial applications including pharmaceuticals and oil refining. Since sodium silicide is safe, inexpensive and easily transportable, the portable power market is a natural fit. Says Lefenfeld, “SiGNa’s portable-power system overcomes two key challenges with using hydrogen for transportation applications – adequate hydrogen storage and safe transport. SiGNa has begun by developing a system that provides power to e-bikes; we envision this platform will become a primary or back up power source for many transportation applications.”
SiGNa’s portable power platform can be utilized in any standalone application that require from 1 W to 1 kW of power including generators, lawn mowers, golf carts, and consumer electronics.
Pre-orders are being taken now at sales@signachem.com.
