Westinghouse 110-inch 4K TV eyes-on: massively giant

There’s nothing quite like a war between television manufacturers to bring our the WOW factor at CES, and this year’s Westinghouse presentation includes quite the looker – a 110-inch 4K TV that’ll just swallow your room up whole. This machine is not yet ready for the market, but certainly will be soon – coming in at a cool $300,000 USD when you want to pick yours up with your life savings. Of course this machine isn’t exactly built for the everyday consumer, but getting up close and personal with it will br bringing on the heat to anyone’s eyeballs and brain.

IMG_7577

This beast is ready to scale up standard HD signal to fill its monstrous full screen display, running native 4K content with the greatest of ease as well. This is but one of several televisions that’ve been revealed this week by Westinghouse that’ll have you raising your eyebrows, the others being 50, 55, and 65-inch versions of this machine starting at $2,500, moving up to the middle with $3k, and ending on the largest for $4,000 USD.

Each of these sets will be available and shipping in the first quarter of 2013 and will be in stores save the largest of the pack. The giant 110-inch model will be made to order, respecting the idea that if you’re going to pay that amount of cash for a television, the company is going to take care of you. Shake hands with Westinghouse with a 4K television this coming season – and play some Mario Brothers while you’re at it to see how giant the pixels are.

2342323hero

23423
43423
132312123

It should be made clear that when we got the opportunity to see this 2013 lineup this week, we saw images so bright and so sharp that we’ll have a difficult time ever looking at a lesser machine again. The room these beasts were in were engulfed in their undeniable wave of image power. Have a peek at the images we have of them above and below, but know that it’s not entirely possible to capture their excellence without your own eyes on the spot.

IMG_7579
raeawer
IMG_7576


Westinghouse 110-inch 4K TV eyes-on: massively giant is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

YotaPhone hands-on

To be completely honest, the YotaPhone is one of devices I’ve been most looking forward to seeing during Slashgear’s stay here at CES 2013. The device was announced last year and was immediately turning heads with its dual-screen setup. Dual-screen phones are nothing new, but the folks at Yota have put their own little spin on the dual-screen setup: instead of offering two LCD screens, the YotaPhone sports an HD LCD display on the front, and an eInk display around the back.

P1050570

Of course, with dual-screen phones, manufacturers run the risk of having their devices ultimately come off as nothing more than gimmicky. The YotaPhone has its share of dissenters, but I’m pleased to report that it seems like a very solid device. We’ve got some powerful hardware running under the hood, including a dual-core Snapdragon S4 processor clocked at 1.5GHz, 2GB of RAM, and a custom 2,100mAh battery, so there’s plenty to get excited about for the hardware enthusiast (though admittedly, it would have been great to see a quad-core CPU in place of the dual-core).

Both of the displays come in at 4.3-inches in size, with the LCD displaying at 1280×720 resolution. That naturally means 720p HD, so visuals are nice and sharp, and if you’re a fan of eInk displays, the YotaPhone’s rear screen will certainly please. Add to that a rear-facing 12MP camera and you’ve got a phone with one solid set of specs.

Interestingly, the folks at Yota have ditched buttons and have instead opted for gesture controls. This was something I was a bit hesitant about, but as it turns out, gesture controls work really well and seem like a intuitive replacement for the Android navigation buttons we’re all familiar with. While we’re on the topic of Android, it’s worth pointing out that Yota expects its device to be running Android 4.2 by the time in launches here in North America, but unfortunately the device we saw today was only running Android 4.1. Still, having Jelly Bean out of the box is always a good thing, so you won’t hear many complaints from me.

P1050579

The phone is pretty lightweight and feels good in the hand, though there is a bit of a curve to both of the displays, which are each kept safe behind a layer of Corning Gorilla Glass 3. It’s important to keep in mind that the device we saw today is still only a prototype, so aspects of its design could change by the time the it launches here in North America. At any rate, I can safely say that the YotaPhone is every bit as cool as I was hoping it would be, but there are still a few kinks to iron out in the weeks and months to come. Yota says that it’s aiming for a late 2013 launch in North America, so expect to be seeing much more of the YotaPhone as we get closer to the end of the year. As always, you can find all of our coverage from CES 2013 at our CES portal, so be sure to have a look at that!

P1050579
Screen Shot 2013-01-09 at 11.04.25 AM
P1050572
P1050575
P1050576
P1050578
P1050568
P1050569
P1050570
P1050571
P1050565
P1050567


YotaPhone hands-on is written by Eric Abent & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Lenovo ThinkPad Helix extended hands-on: Rip and Flip up close and personal

We’ve been given another opportunity to get right in deep with Lenovo’s newest convertible tablet running full Windows 8: the ThinkPad Helix, and this time we’re making a point of checking out not just the ripping and the flipping, but the spoiler on the back and the precision ruined craftsmanship as well. As you may well know from our previous look at this machine, you’re able to open it up in its notebook form to use it as a full-function Windows 8 laptop, press the button on the lower left of the display, “rip” it out, use it as a tablet, and place it back in place the other way around – then you can push it back down flat and have a massive battery capacity as well.

20130108_214553

One of the more interesting things we’ve learned in this new look at the machine is the fact that you get a couple of relatively hidden cooling fans under the hood in the back. Have a peek at this sequence of photos to see the spoiler (our term, not theirs) coming up as you life up the hood of this beast. Under that spoiler is a couple of fans that’ll keep this machine cool no matter what you’re processing or indulging in.

foldup

fans

The Lenovo Helix is solid, made with the same level of attention to detail that the full ThinkPad line always is. When we took a few minutes to literally carry the device around for a while, we noticed it was relatively light and felt solid above all else. The connection between the tablet and the keyboard is strong and ready for everyday work and play action.

Have a peek at the photos and video above and below and make sure you tune in throughout the week to our CES portal for every bit of CES 2013. We’ll be getting much more hands-on and up to the minute updates as we see the best of the season appearing right here, live from Las Vegas.

corner
fans
foldup
20130108_214406
20130108_214412
20130108_214526
20130108_214546
20130108_214553
20130108_214359


Lenovo ThinkPad Helix extended hands-on: Rip and Flip up close and personal is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Pebble smartwatch: CEO Eric Migocovsky talks Kickstarter loyalty and more with SlashGear

With $10m in the Kickstarter bank and a product shipping in two weeks time, Pebble was arguably the king of the crowdsourcers in 2012. The smartwatch already has us tempted after our hands-on, so we caught up with Pebble CEO Eric Migocovsky to talk lessons-learned from the original InPulse model, the process of growing a company in the public eye, and what’s next in the smartwatch’s future.

slashgear_eric_migicovsky_pebble

With so many rival smartwatches already on the market and in the pipeline – Toshiba is showing one such concept here at CES – Migocovsky says it’s been a “perfect storm” of publicity, timing, and attention that has seen Pebble capture the imagination. Part of that is backer engagement, Migocovsky believes: the fact that Pebble is contactable by Facebook, Twitter, and other routes to anyone with a question or a suggestion.

pebble_smartwatch_hands-on_sg_19

Those suggestions have come thick and fast, though Migocovsky is wary of over-promising at this stage. The current SDK only caters for alternative watch faces – the first thing you’ll see when you glance at your wrist, given the e-paper display is permanently on (and a tap of the watch triggers the backlight) – and there’s no timescale for when third-party applications will be enabled. Still, the If This Then That integration does make for more flexibility for those willing to craft a few web-app macros.

Pebble Smartwatch demo:

Pebble doesn’t see that app limitation as a drawback, however; in fact, Migocovsky argues it’s an advantage. If the initial product isn’t good enough to be deemed worthy of a place on your wrist, you won’t wear it, he points out: if people aren’t wearing it, then developers won’t recognize it as a worthy market to code for, and the carefully-honed ecosystem will shrivel.

Pebble Smartwatch interview with Eric Migicovsky

That commitment to Kickstarter backers isn’t going anywhere, either. Not only will the 85,000 people who supported Pebble with cash up-front be the first to get their smartwatch, Migocovsky is also determined to make sure they don’t end up with an outmoded device any time soon. The “added extra” hardware features – such as the Bluetooth 4.0 capabilities, despite the fact that Pebble currently only uses Bluetooth 2.1, and the ambient light sensor – are a big part of that, and Pebble will be pushing out firmware updates every 2-3 weeks until every initially-promised feature is present and correct.

pebble_smartwatch_hands-on_sg_23

Next step, though, is batch-shipping of the first Pebble units to backers, with Migocovsky saying the factory is capable of producing 15,000 units a week when at full tilt. When the initial list is done, then they’ll turn to the reservations list that opened after the Kickstarter closed; that currently measures in the tens of thousands, Pebble says, though not quite the same number as the watch start-up saw backers.

The wearables market is certainly heating up, with a range of form-factors (on the wrist, digital eyewear like Google Glass, clip-on activity trackers, and more) being played with, and it seems 2013 may be the year it all comes to a head. Our early impressions are definitely positive – several of the SlashGear team are also Kickstarter backers – but we’ll reserve our full opinion until we can live with Pebble on our wrist for a while.


Pebble smartwatch: CEO Eric Migocovsky talks Kickstarter loyalty and more with SlashGear is written by Chris Davies & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Live from the Engadget CES Stage: an interview with ARM’s Simon Segars

Live from the Engadget CES Stage an interview with ARM's Simon Segars

Want to know more about what goes into that smartphone you’re carrying around all the time? This one’s worth checking out. We’ll be sitting down with Simon Segars, the president of ARM Inc. about the technologies that power many of our mobile devices.

January 9, 2013 2:30 PM EST

Check out our full CES 2013 stage schedule here!

Continue reading Live from the Engadget CES Stage: an interview with ARM’s Simon Segars

Filed under: ,

Comments

ONGUARD iPad, iPhone 5, and Nexus 7 folding “origami” cases hands-on

This week we got the opportunity to speak with Jane from ONGUARD about the company’s new family of folding cases and covers for the iPad, iPhone, and Google Nexus 7. What you’re seeing here is a brand new line of cases and covers, the company bringing on a new generation of magnet-toting amalgamations of protection and display for your devices. What we’ve seen here is a unit for the iPhone 5 that’s a case and a stand in one, a similar solution for the iPad (3/4), and another for the Google Nexus 7 tablet that’s not just a stand, but a sleeve as well.

20130108_211942

The iPhone 5 unit we’re seeing here is shown in leathery black with red stitching, working as two separate pieces, a case that can exist on its own, and the leathery bit that fits over it to create one single unit. The protection this unit offers is thick and robust, but the real gem is the stand – it’s magnetically held tight and down in your pocket when you don’t need it and folds up and out when you do. Real simple, really high quality – and it’ll hold your iPhone up in two different positions.

NOTE: None of the cases are called “origami” as such, but that’s certainly the easiest way to describe them to someone who has never seen them before.

20130108_211924
20130108_211907
20130108_211830

Next is the iPad case and stand by the name of ONGUARD Shell. This unit fits around the sides and back of your iPad to offer some basic protection for everything but the display and, like the iPhone case, folds up in a triangular origami-like way to prop your iPad up with style. While we’ve seen similar solutions to this in the past, this is the only unit we’ve seen where the stand stays flat against the back when not in use.

20130108_211952

Finally there’s a unique case/stand by the name of ONGUARD Sleeve for the ASUS Nexus 7 from Google. This unit (like the other solutions we’ve seen today) comes in a variety of colors, but here works on the understanding that the Nexus 7 is already thick enough as it is, keeping your protection limited to when you’re in transit with the machine rather than having it covered at all times. The case then folds up and acts as a stand, once again, when you’ve taken the device out for daily use. Well played!

20130108_212034
20130108_212027
20130108_212020

We’ll be seeing more of ONGUARD in the near future – for now you’ll want to jump in on the rest of our CES 2013 action in our massive CES portal all week long for more hands-on action and up to the minute updates all week long!


ONGUARD iPad, iPhone 5, and Nexus 7 folding “origami” cases hands-on is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

SurDoc Offers Unlimited Cloud Storage At CES 2013

surdoc free cloud SurDoc Offers Unlimited Cloud Storage At CES 2013[CES 2013] Ever heard of SurDoc before? Neither have I, so for those of us who are in the dark, SurDoc prides itself in being a leader in cloud storage and document technologies. In fact, at CES this year, SurDoc has every intention to demonstrate their patented best-in-industry VisiDoc user interface, in addition to showcasing their TruPrivacy security technology to those who drop by their booth. Basically, TruPrivacy technology is a breakthrough development in cloud storage security technology, where users are said to be able to enjoy absolute privacy protection without increasing the costs of cloud storage.

In a nutshell, TruPrivacy would give consumers the peace of mind to use cloud-based storage, where hackers or any other unauthorized third-party like the government, industry associations, or even employees are able to gain access to your data within a cloud service provider. As part of a generous gesture to celebrate the recent launch of their TruPrivacy Technology, SurDoc will be offering free unlimited cloud storage for 1 year accounts until January 15, as long as you key in the code 2013CES at SurDoc.com. [Press Release]

By Ubergizmo. Related articles: Raspberry Pi Nears 1 Million Milestone, Mushkin Announces 960GB Chronos SSD,

TP-LINK Wireless N Mini Pocket Router

tplink router TP LINK Wireless N Mini Pocket Router[CES 2013] A router is a router, right? TP-LINK does not think so, which is why they have taken the opportunity to announce the Wireless N Mini Pocket Router, also known by its model number as the TL-WR810N. The Wireless N Mini Pocket Router will be one of the latest in a line of innovative portable wireless networking devices which intends to deliver robust wireless networking even when you are not seated comfortably behind your desk at home or at the office. We are talking about a theoretical 300Mbps wireless networking capability, although in real life, you would be unable to achieve such speeds as there are plenty of other factors to take into consideration.

It is nice to know that with the Wireless N Mini Pocket Router, there is no need to tote around an external power adapter whenever you travel, and it relies on default pre-encrypted security parameters in AP mode as an added measure of security. All you need to do is plug the device into a power socket, insert a home, office or hotel’s Ethernet cable into one of the device’s two 100Mbps ports, and you’re good to go. Heck, the Wireless N Mini Pocket Router also doubles up as a charger thanks to its USB port which lets you plug in other compatible devices to replenish their worn out batteries.

No idea on pricing, but it should hit the market sometime in the second quarter of the year. [Press Release]

By Ubergizmo. Related articles: Outdoor Technology Announces CHIPS Wireless Drop-in Audio System , Hisense Transparent 3D Display At CES 2013,

Hisense Transparent 3D Display At CES 2013

hisense transparent Hisense Transparent 3D Display At CES 2013[CES 2013] If you happen to be at CES this year, you would do well to check out the show floor and scout for different “niche” devices, as well as those that did not gain attention in terms of a press conference. One of them would be Hisense, who has a transparent 3D display on show. To put it simply, you are able to place just about anything behind the display, where it will show off a 3D image in the foreground. The transparent 3D display demo unit was a 40-inch screen coming in a landscape format, and this raw attempt will require you to wear a pair of 3D glasses in order view the 3D effect as intended.

Chances are, Hisense would market this transparent 3D display that is high on the novelty factor to the advertising industry, but will consumers bite at the end of the day? That remains to be seen, but stranger things have happened in the past, such as a full touchscreen smartphone – who would have thought that we would actually ditch the physical QWERTY keyboard eventually?

By Ubergizmo. Related articles: Outdoor Technology Announces CHIPS Wireless Drop-in Audio System , TP-LINK Wireless N Mini Pocket Router,

Samsung Youm Flexible OLED Display

samsung youm Samsung Youm Flexible OLED Display[CES 2013] Just how many tricks do you think Samsung has up their sleeves this CES? In fact, the South Korean conglomerate has just pulled another rabbit out of their mythical hat in the form of the Samsung Youm flexible OLED display to prove to the world that they really are on the verge of a revolution in the world of portable devices. The iPhone would definitely have nothing on a flexible display smartphone down the road if all else goes well for Samsung.

In fact, Samsung even paraded a handheld prototype which was flexible in more than one way, and a concept video that was shown to journalists who were present pointed to the smartphone folding out to turn into a tablet. The Youm prototype also had a display which could be stretched beyond the front of the device, which means you can check out notifications and other widget content even when the device has been laid out in a flat manner. Image courtesy of Engadget.

By Ubergizmo. Related articles: Outdoor Technology Announces CHIPS Wireless Drop-in Audio System , TP-LINK Wireless N Mini Pocket Router,