Marvell-powered OLPC XO 1.75 only draws two watts of power, finally charges via hand crank

Here’s something you may not know — OLPC’s XO hand crank has never really worked to recharge the kiddie laptop. Why? Well, the previous versions were powered by x86 AMD and VIA processors that pulled too much power. However, things are different now with the XO 1.75 since OLPC has baked in Marvell’s 1GHz Armada chip. As a result, the entire system now only pulls two watts of power, and thus the battery can be given some more juice with a few turns of that neon green crank. It’s not meant to recharge the laptop completely — actually, according to OLPC’s CTO Edward McNierney, it would take about two hours of cranking to top off the system. Other than the fresh ARM CPU, the new model is identical to the previous versions — it has an outdoor readable PixelQi display, Flash storage, a rubber keyboard, and runs Sugar OS. On a different note, OLPC is hard at work on the tablet version of the XO and, according to McNierney, the only hold up is finding a more durable, plastic display — converting the current system into a tablet should be fairly easy since all the guts are in the display part already. The tablet is still on track for 2012, while the XO 1.75 should be with the hand-cranking children by the end of the summer.

Marvell-powered OLPC XO 1.75 only draws two watts of power, finally charges via hand crank originally appeared on Engadget on Sun, 09 Jan 2011 00:00:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Marvell-powered OLPC XO 1.75 only draws 2 watts of power, finally charges via hand crank

Here’s something you may not know — OLPC’s XO hand crank has never really worked to recharge the kiddie laptop. Why? Well, the previous versions were powered by x86 AMD and VIA processors that pulled too much power. However, things are different now with the XO 1.75 since OLPC has baked in Marvell’s 1GHz Armada chip. As a result, the entire system now only pulls two watts of power, and thus the battery can be given some more juice with a few turns of that neon green crank. It’s not meant to recharge the laptop completely — actually, according to OLPC’s CTO Edward McNierney, it would take about two hours of cranking to top off the system. Other than the fresh ARM CPU, the new model is identical to the previous versions — it has an outdoor readable PixelQi display, Flash storage, a rubber keyboard, and runs Sugar OS. On a different note, OLPC is hard at work on the tablet version of the XO and, according to McNierney, the only hold up is finding a more durable, plastic display — converting the current system into a tablet should be fairly easy since all the guts are in the display part already. The tablet is still on track for 2012, while the XO 1.75 should be with the hand-cranking children by the end of the summer.

Marvell-powered OLPC XO 1.75 only draws 2 watts of power, finally charges via hand crank originally appeared on Engadget on Sun, 09 Jan 2011 00:00:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Crapgadget CES, round seven: MiniDV underwater goggles for all ages

Really? For all ages?

Crapgadget CES, round seven: MiniDV underwater goggles for all ages originally appeared on Engadget on Sat, 08 Jan 2011 23:36:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Kenmore shows off smartphone / tablet-connected appliances at CES (hands-on)

We’ve already seen some smartphone-connected appliances in LG’s Thinq lineup, and it looks like Kenmore is now getting ready to join it in a big way with some fairly impressive “enhanced” appliances of its own — which we managed to get an early look at here at CES. Those will include things like washers, dryers, stoves and refrigerators, all of which will be able to be controlled via a “smartphone or smart tablet” (Apple and Android devices were specifically mentioned as getting a free app), or via a large touchscreen on the device itself (not removable as a tablet, unfortunately). What’s more, the appliances all boast Kenmore Connect, which allows for remote diagnostics that can be used to prepare technicians for in-home repairs, and they pack an array of energy management features that will let you conserve energy and keep watch on how much you’re using. Unfortunately, you’ll still have a bit of a wait before you can actually buy one — Kenmore says they’ll start rolling out in 2012. Hit up the gallery below for a closer look.

Continue reading Kenmore shows off smartphone / tablet-connected appliances at CES (hands-on)

Kenmore shows off smartphone / tablet-connected appliances at CES (hands-on) originally appeared on Engadget on Sat, 08 Jan 2011 23:11:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

HTC EVO Shift 4G vs. Motorola Cliq 2… fight!

HTC’s ThunderBolt along with Motorola’s Atrix 4G and Droid Bionic might be taking the overwhelming majority of the attention here at CES over the past few days, but remember that both companies have introduced some other models that are expected to be serious midrange breadwinners for their respective carriers. One of the most obvious head-to-head matches would be the HTC EVO Shift 4G taking on the Motorola Cliq 2, both launching this month on Sprint and T-Mobile, respectively.

Continue reading HTC EVO Shift 4G vs. Motorola Cliq 2… fight!

HTC EVO Shift 4G vs. Motorola Cliq 2… fight! originally appeared on Engadget on Sat, 08 Jan 2011 22:49:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Ion Book Saver hands-on

Treading on the brink of being another CES crapgadget, here’s Ion Audio‘s venture into the book-digitizing business. The Book Saver promises one-second color scans of both pages of a book and comes with OCR software and the ability to export to PDF or JPEG formats. Plans aren’t quite finalized and the unit before us wasn’t functional, but a 2GB SD card is expected to be included while there’s also a USB connection to hook up straight to your PC or Mac. The big problem here is that there’s no automation for page turning, and worse yet, you’ll need to lift the entire, somewhat fragile, scanner in order to flip to the next page. That’s done using that fetching Wiimote KIRF up at the front of the device and there are a pair of cameras embedded in the bottom of the overarching plastic casing. MSRP is set at $149 and availability is coming in June at places like Barnes & Noble, Staples, and Office Depot … you know, in case you actually want one.

Ion Book Saver hands-on originally appeared on Engadget on Sat, 08 Jan 2011 22:28:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Griffin Beacon universal remote control system hands-on

We visited Griffin’s CES booth to check out the Beacon universal remote control expecting yet another Redeye clone, but instead wound up walking away impressed. Two notable features of the prototype Bluetooth to IR converter device are that it’s battery powered and includes a 360 degree IR blaster. These are key since they give users the freedom to place the transmitter almost anywhere around an entertainment center. The free iPhone remote app built by Dijit was the real highlight though. The UI and functionality was incredibly intuitive, and we especially liked that the setup process doesn’t require inputting device model numbers. Instead, users just pick the brand and then test a series of code cycles to see if their components respond. The TV guide and Netflix integration are also points of distinction over competitors — since you can select shows or movies to watch directly from the app. Last but not least, your remote settings can be saved and downloaded to as many devices as you like. To give you a feel for the system, we’ve included plenty of shots of the app’s UI in the gallery below along with more photos the device.

Continue reading Griffin Beacon universal remote control system hands-on

Griffin Beacon universal remote control system hands-on originally appeared on Engadget on Sat, 08 Jan 2011 22:09:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

ViewSonic ViewFun 3D Show photo frame hands-on

Do you love 3D? Do you love pictures? Do you love 3D pictures? The ViewFun 3D Show picture frame from ViewSonic may just be your fix you’ve been dreaming of. The $179 photo viewer jankily converts 2D stills to 3D (and videos, too, apparently, although we didn’t get to see a demo) and eliminates the use for those funky glasses. The images remind us of holograms we used to find in cereal boxes, except bigger. The 8-inch frame sports capacitive buttons on the bezel that light up on contact. Along the left side of device, you’ll find a USB 2.0 port, SD slot and power button. In order to stand this thing up, the company packed a pull-out plastic kickstand that felt pretty flimsy. Oh, and the remote control we demoed had improper button mapping, which made it virtually useless. Peek the gallery below the fold for a bunch of shots of this thing on the CES show floor.

ViewSonic ViewFun 3D Show photo frame hands-on originally appeared on Engadget on Sat, 08 Jan 2011 21:41:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Pleo RB cuddles up to CES, we go hands-on and talk to Innvo about future Pleos

The folks behind the Pleo robot dinosaur didn’t have much but promises and a giant, not-for-sale version of the bot at last year’s CES, but Innvo Labs has come through this year. They have a number of their new Pleo RB dinos on hand, and we got a chance to both check them out and talk to Innvo COO Derek Dotson about what the future might hold for the robot dinosaur that refused to die. As for the current Pleo RB, while it may look relatively unchanged from before, it does boast some fairly impressive improvements, including voice recognition (with any language), more touch sensors, the ability to sense temperatures, RFID-based “learning stone technology” for feeding and other advanced commands, and time of day awareness. As you might be able to surmise, the combination of those latter two means that the Pleo will get slow and lethargic if you don’t take care of it, but Innvo assures us that it won’t actually die (just make you incredibly sad).

It sounds like we could be seeing some even bigger changes in future generations of Pleo, though. Innvo tells us that they’ve basically pushed the current design to the limit, and they seem to be keeping all options on the table for future models. We asked about different versions, internet-connectedness, and even a Roomba-like ability to recharge itself, and Dotson said that Innvo considering all of those, but that it doesn’t want to rush and do anything that would dilute the Pleo brand. Hit up the gallery below for a closer look at the Pleo RB, and head on past the break for a video.

Continue reading Pleo RB cuddles up to CES, we go hands-on and talk to Innvo about future Pleos

Pleo RB cuddles up to CES, we go hands-on and talk to Innvo about future Pleos originally appeared on Engadget on Sat, 08 Jan 2011 21:28:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Intel Oasis: firetrucks, dragons, and trains hands-on

We’d seen Intel Lab’s Oasis (Object-Aware Situated Interactive System) project a while back, and sure, while what it’s showing off is the same, we love to get up close and personal. Using a Kinect-style camera, the system is able to recognize 3D objects on a surface and then project some nifty graphics to add interactivity. Placing the dragon near the house or train station sees them light on fire, drop a firetruck in and it puts out the fire, add a train then draw a track in front of it by dragging your finger, you get the idea. Intel Labs isn’t bringing any of this to market — at least not yet — but we’re enthused with what we see and look forward to what the folks with the crayons can dream up. Have a peek at the vid and gallery if trains, burning Lego people, fire breathing dragons, and firetrucks are your thing.

Myriam Joire contributed to this article.

Continue reading Intel Oasis: firetrucks, dragons, and trains hands-on

Intel Oasis: firetrucks, dragons, and trains hands-on originally appeared on Engadget on Sat, 08 Jan 2011 21:21:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments