Hasta La Gadget!

A new Apple patent application published by the USPTO today describes a magnetic connector similar to the one used to attach Smart Covers to the current iPad, but designed to be far more flexible with a variety of possible accessory combinations. It’s a smart connector system that could recognize the attached peripheral and change functionality accordingly.

The types of peripherals described in the patent are many and varied, and include things like speaker docks, trackpads and keyboards, drawing tablets, radio wave antennas, cameras, game controllers and card readers. There’s also a provision which describes how two iPads might be linked together via an intermediary magnetic hinge dock that connects to the smart magnetic link in each.

It could work either with basic magnets, or with electromagnets that can be turned on or off using controls built into iOS, according to the filing, which would allow you to theoretically ‘lock’ accessories in place, including docks that simply stand the iPad up or hold it on a positionable mount for different viewing angles.

The system’s flexibility doesn’t end there, however – Apple also describes various in-car mounts for connecting an iPad to your vehicle’s dash or headrests, as well as to a treadmill or other gym equipment. Each could be a simple enough magnetic connection with no attendant change in functionality, but the patent also describes how they could complete a circuit, too, to deliver power, and communicate with the attached peripherals to transfer specific kinds of data back and forth.

Finally, there’s mention of wearable tech that could be used to trigger the magnetic sensor and prompt various behaviour from the iPad. This could take the form of a ring, for instance, which when worn by the user would do things like unlock the iPad when the hand it’s on is waved deliberately across the tablet’s screen. In the context of other Apple wearable rumors making the rounds, this could theoretically also work with magnetic connectors built into some kind of iWatch, possibly for identification and unlocking purposes as well as for simple proximity-based communication with certain apps.

The system described in this patent is elaborate and filled with potential, but it’s worth noting that peripherals connected via the Lightning port can do some of the things depicted in the application. Still, were Apple to actively invest in putting this into shipping iPads, it would no doubt open up a world of possibility for accessory makers. Connections that don’t require physical I/O, and that could automatically prompt different behavior from an iOS device and from specific apps would significantly enrich the already vibrant appcessory ecosystem.

Apple already has magnets within the iPad’s chassis, so space constraints for components aren’t necessarily a huge concern, and this could easily be a focus feature for an iPad generational revision, especially in lieu of form factor or display changes. Apple patents rarely make their way intact into shipping hardware, but in this case, I’m holding out hope we do see something similar make its way to consumer hands.

The USB 3.0 Promoter Group teased us with the prospect of a 10Gbps USB standard back in January, and it now has something to show for its work: the alliance has finalized its specification under the USB 3.1 name. While little has changed with the port format in half a year’s time, its completion lets AMD, Intel and others start work on chipsets that offer twice the bandwidth of USB 3.0 while preserving support for USB 2.0. There’s no public roadmap for the first USB 3.1 devices, although the first related developer sessions will begin on August 21st. Not that the Promoter Group is necessarily in a rush — while Intel’s Thunderbolt 2 will hit an even quicker 20Gbps this year, the new USB format is more likely to receive broad support.

Filed under: Peripherals, AMD, Intel

Comments

Via: The Register

Source: USB Implementers Forum (PDF)

If you own a MacBook, then you’re probably thankful for its handy MagSafe, the magnetized power connector for your laptop’s charger. Not only does it make connecting the charger to your laptop insanely easy, it also detaches fairly easily. When you trip over the cord or yank it off forcefully, it won’t take your precious MacBook down with it. The Neo-Plug works just like the MagSafe, except it’s for mobile devices.

Invented by Jacob Brozek, the Neo-Plug takes its name from the neodymium magnets that connect its two parts together. Jacob’s design essentially divides the connector end of a charger or data cable into two parts. One end stays on the cable while the other end stays on the port of your mobile device. The magnets embedded on both halves connect the two parts effortlessly.

Brozek is seeking to raise $167,000(USD) on Kickstarter by May 8 to finish his product, but with such a good product I think he’ll raise more than that amount. As of now the Neo-Plug has three variants – micro-USB, 30-pin and Lightning. Pledge at least $30 and you get a Neo-Plug of your choice. You can also learn more about the Neo-Plug on its website.

Apple’s controversial Lightning connector has a name that nicely matches up with the Thunderbolt data connection. But its name caused Apple some trouble—because it had to buy the trademark from Harley-Davidson. More »

If you were miffed at having to pay $29 to adapt your existing iPhone accessories to the iPhone 5‘s newfangled Lightning connector, fear not: Apple will throw in the first adapter, gratis. Extras will still run the aforementioned sum, which Cupertino has justified by saying the units will include chips to enable features like analog and USB audio along with syncing and charging. There’s also a $39 cable version available, but neither format will let you output HDMI or VGA video — there’s more (as yet unpriced) adapters coming for that.

Update: Well, the plot thickens. We’re now hearing reports that the above wording is a mistake, and that the adapter isn’t included after all. The information comes via a reader of The Next Web, who advises Apple sales support informed them it was an error. Of course, we’re reaching out to get the final word on the matter. However, that won’t be much consolation to those who made a purchase based on incorrect info.

Update 2: The above wording is now nowhere to be found on Apple’s site, suggesting that it was indeed an error. We’ll keep you posted if we hear anything more.

Update 3: Well, we’ve just received word from Apple confirming that the iPhone 5 will not ship with a 30-pin to Lightning adapter, which is a bit of a bummer. But, it does come with a Lightning to USB adapter, so if your current accessories have a USB port, all hope is not lost. Sadly, the specific iPod out functionality found in BMWs and Minis is not supported. The full comment is below.

The Lightning to 30-pin adapter does not come in the box with iPhone 5. It is sold separately. However, the Lightning to USB cable does come with iPhone 5 for connection to AC chargers and other devices… The Lightning to 30 Pin adapter supports analog audio output, USB audio, as well as syncing and charging. Lightning to VGA and Lightning to HDMI cables will be available in the coming months.

Filed under: Cellphones, Mobile

Apple’s iPhone 5 will arrive with a free Lightning to 30-pin adapter (update: Apple officially says no it won’t) originally appeared on Engadget on Fri, 14 Sep 2012 16:11:00 EDT. Please see our terms for use of feeds.

Permalink TNW  |  Apple Store  | Email this | Comments