Numark Orbit wireless MIDI DJ controller hands-on (video)

Numark Orbit wireless MIDI DJ controller hands-on

NAMM is yet to open its doors fully, but we managed to sneak a hands-on with the freshly announced Orbit DJ controller from Numark at the press preview. As you can see, the wireless device looks like a game controller that crashed into a disco — it’s certainly distinctive. This is no accident, and the design is purposely built with quick and easy button access in mind, letting DJs (and any MIDI-based performers) step out from behind the DJ booth, and onto the stage. The portability of the Orbit is further amplified by the inclusion of a clip-mount on the rear, as well as lanyard-style strap hoops. It feels light yet solid, and the soft-touch finish means your hands won’t get tired gripping this thing in the throws of a drum-pad solo. The name Orbit also evidently refers — at least in part — to the near-symmetrical design which lets you hold it either way with the same comfortable access to those brightly-lit, colorful controls. Those pads feel smooth, yet tactile — and most importantly — responsive. Tap past the break for more impressions.

That central dial you see in the middle is designed to be used as a multi-purpose knob, and is big enough for you to comfortably thumb it, while still reaching the side controls. There are four buttons which can be assigned as “virtual rotaries,” and once selected, spin that wheel to modulate whatever you have it assigned to (filters, reverb amount etc.). The other set of four buttons let you expand those 16 pads out to a potential 64, so if you want one bank for controlling lights, one for sample triggering, and another for hot-cues, you can do this all from the one small device. It’s not just the external controls that make this interesting, the internal two-axis accelerometer, which can be assigned to parameters of choice, will definitely add a new dimension to what’s possible. Sadly we weren’t able to try this out, but already we’re thinking of some interesting uses. There’s a micro-USB port on one side for charging and tethered use. We only had a short amount of time with the Orbit, but already we could see its potential for enhancing performance. It’s not meant to replace anything in your existing set-up, rather to enhance it, and given the flexibility of MIDI, this could mean a whole host of interesting uses. The crowd of folk waiting to get a closer look behind us certainly showed that it’s piquing people’s interest. Set to be released in spring for a reasonable $100, this looks like a promising start to 2013 for Numark. Check the video tour below for more.

Billy Steele contributed to this report.

Filed under: ,

Comments

Numark refreshes iDJ Live, NS7, Mixtrack Pro DJ controllers, intros new Orbit wireless option

Numark refreshes iDJ Live, NS7, Mixtrack Pro DJ controllers, intros new Orbit wireless option

Many a DJ’s first footsteps into the craft has started with a box labeled ‘Numark.’ At This year’s Winter NAMM the prolific firm has updated three of it’s existing controllers, and added a new hand-held wireless line — called Orbit — into (ahem) the mix. First up for the refresh treatment is the sequel to the iDJ Live iPad DJ controller — the iDJ Live II (of course). What’s new? Well this time around there’s USB connectivity, which opens the functionality to a much broader range of software. The design has also been revised, with the platters most notably being much lower profile. Controls-wise, it’s still back to basics with the essentials covered (EQ, crossfader etc), but the lack of onboard audio interface means you’re still relying on an audio splitter for cueing. If you need a little more control, or a dedicated audio interface, the second revision on the list — the Mixtrack Pro II — might be more up your street. Head past the break to read more.

Once again the design has been given a makeover, plus there’s 16 drum pads, hot cues, back-lit platters and all the usual effects — there’s also Serato DJ Intro software bundled in to get you going. The Mixtrack Pro II will cost $299 when it launches sometime this month. Last of the existing hardware revisions goes to Numark’s popular motorized-platter controller the NS7, with the NS7 II. This is aimed at those DJs who like to trick their sets out a little bit, and this is made all the easier by the inclusion of 16 MPC-style pads, borrowed from the sister brand Akai’s famous sample player line. The pads also have MIDI-assignable RGB backlights, letting you get creative with the color-scheme. The 3,600 ‘tick’ resolution, plus slipmats definitely make this the digital-turntablist’s choice (if that’s a thing) from the new recruits.

Last, and possibly most interestingly, is the entirely new Orbit controller. This — so claims Numark — is the world’s first wireless handheld DJ controller. The game-controller-esque design evidently hopes to bridge the gap between DJing and performance. The low-latency 2.5GHz wireless will bring the artist closer to the audience, for sure, but if you’re a little more traditional, or like a longer, power heavy performance, you can still cable-up. There’s four selectable banks of 16 pads (eight either side) plus four virtual knobs and a control wheel for adjusting parameters in real time. If that’s all a little vanilla, there’s also a two-axis accelerometer which can be set to control two different parameters (fader frequency or volume, for example) which is activated by shoulder buttons — ideal for those extra-active performers — and reminiscent of controllers we’ve seen before. For more info head over to the PRs, or check our ongoing NAMM coverage for hands-ons as we find things.

Show full PR text

NUMARK INTRODUCES iDJ LIVE II

iDJ Live II offers expanded mixing capability and an all-new design.

Cumberland, R.I. (January 24, 2013) – Numark, the world’s leading manufacturer of DJ technology, announces iDJ Live II, a new mobile DJ controller that offers versatile control over a wide variety of computer-based and mobile DJ platforms. Numark will unveil iDJ Live II at Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

An updated and enhanced version of Numark’s iDJ Live controller, iDJ Live II features an updated low-profile design and USB connectivity, allowing it to perform with both laptop-based and mobile DJ platforms. iDJ Live II features a standard layout of DJ controls, including a crossfader, EQ knobs, and capacitive touch-activated platters. The design of iDJ Live II has also been slimmed down with redesigned platters that are now illuminated and low-profile. A headphone/speaker splitter cable is also included.

“iDJ Live II enhances and builds upon our original vision for iDJ Live-give anyone and everyone real DJing capability in a compact, comprehensive, and fun package,” said Chris Roman, Numark Product Manager.

Numark will display and demo iDJ Live II at Booth 6700 at the 2013 NAMM show.

Show full PR text

NUMARK UPDATES AND IMPROVES THE WORLD’S #1 DJ CONTROLLER

Mixtrack Pro II unveiled at NAMM 2013 and available in stores immediately

Cumberland, R.I. (January 24, 2013) – Numark, the world’s leading manufacturer of DJ technology, announces Mixtrack Pro II, an enhanced and updated version of Mixtrack Pro, the world’s best-selling DJ controller. Numark will exhibit Mixtrack Pro II at Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

Mixtrack Pro II features a new streamlined design and a new expanded layout of professional controls, including 16 backlit multifunction drum pads and illuminated touch-activated platters. Hot cues, looping, and effects controls are all onboard, along with a built-in professional DJ audio interface. Building upon Numark’s longstanding partnership with Serato(R), Mixtrack Pro II comes with Serato DJ Intro. DJs can also easily use Mixtrack Pro II with most popular DJ software, and it also comes pre-mapped for an optional upgrade to Serato DJ, the latest state-of-the-art professional software from Serato. Serato DJ includes a wide range of all-new features and capabilities, including stunning new effects powered by iZotope(R), ultra-flexible and intuitive MIDI mapping, and the ability to set and trigger up to eight cue points.

“When we first released Mixtrack Pro, there was nothing else like it-it set the bar and gave DJs and aspiring DJs everywhere truly professional capabilities,” said Chris Roman, Numark Product Manager. “Mixtrack Pro II is the next step of that evolution-the bar just got even higher.”

Numark will also be showing Mixtrack II, an all-new version of Mixtrack, which shares all of the same professional updates received by Mixtrack Pro II.

Mixtrack Pro II will be available in stores in January 2013 with an estimated street price of $299.

Show full PR text

NUMARK ONCE AGAIN DEMOLISHES THE BOUNDARIES OF DJING WITH THE INTRODUCTION OF NS7 II

Incorporating exclusive technology from Akai Professional, NS7 II offers DJs the most responsive control surface ever created with virtually every inch filled with advanced touch-sensitive controls.

Cumberland, R.I. (January 24, 2013) – Numark, the world’s leading manufacturer of DJ technology, announces NS7 II, a dramatically enhanced and updated version of the industry’s most advanced and best-selling motorized DJ controller, NS7. NS7 II features four channels, 16 backlit RGB velocity-sensitive MPC(R) pads from Akai Professional, expanded effects controls-including a full array of capacitive touch-activated knobs and filters-and the most comprehensive integration for Serato DJ available. Numark will exhibit and demo NS7 II for the first time at Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

For more than 20 years, Numark has set the pace in the world of digital DJing, empowering DJs with cutting-edge technology that has continually advanced the art form. In 2007, Numark and Serato(R) released NS7, a controller that blends different eras of DJing so completely it makes them virtually indistinguishable from each other. Since then, the powerful experience offered by NS7 has defined the top tier of DJ performance, setting the standard by which all other controllers are judged.

Now, with NS7 II, Numark is pushing the modern DJ’s performance capability even further, incorporating iconic technology from Akai Professional, the world leader in music production technology and creator of the legendary MPC. NS7 II’s 16 MPC pads can be instantly assigned to control five dynamic performance features in Serato DJ: Cues, Loop, Roll, Sampler, and Slicer. In addition, each pad features RGB illumination, allowing for a virtually endless amount of color variations assignable via MIDI. Vinyl platter control has never felt more familiar with its high- and low-torque motorized platters with real slip mats and real vinyl sitting on 3,600 ticks of resolution. NS7 II’s four-channel mixer works with or without a computer and includes a full array of external device inputs. Capacitive touch-activated filter, gain, EQ, and effects knobs are other features incorporated from Akai Professional, which turn the knobs themselves into control surfaces. DJs can use them for instant-on parameter control, blending effects, and instant frequency kills. “NS7 II is an interactive playground,” said Chris Roman, Numark Product Manager. “It’s built to squeeze every ounce of capability out of Serato DJ and push your creative limits. It’s born to perform and to empower DJs with maximum live-performance creative capability.”

NS7 II will be unveiled at Booth 6700 at the 2013 NAMM show on January 24th.

Show full PR text

NUMARK INTRODUCES THE WORLD’S FIRST WIRELESS HANDHELD DJ CONTROLLER

Orbit offers DJs unprecedented wireless control with 16 backlit pads, large aluminum control wheel, built-in 2-axis accelerometer, belt clip, and 8 hours of personality on a single charge.

Cumberland, R.I. (January 24, 2013) – Numark, the world’s leading manufacturer of DJ technology, introduces Orbit, a first-of-its-kind wireless handheld DJ performance controller. Numark will unveil Orbit at and around Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

Numark’s Orbit is the next step in the evolution of the performing DJ. Made to be held in the hands, strapped to your body using its built-in clip, or placed on the table, Orbit packs an unheard-of amount of control into an ergonomic game-controller-on-steroids design, which has every inch, inside and out, tailor-made for live performance. Orbit can be used wired via the included USB cable, which also charges it, or wireless using 2.4 GHz ultra-low-latency connectivity. Orbit features 4 selectable banks of 16 backlit pads, 8 on each side, for adding and blending effects, launching hot cues and samples, and more. Located in the center of Orbit are 4 bank selection buttons, 4 virtual knobs, and a large aluminum-faced touch-sensitive control wheel, which controls the selected virtual knob for instantly tweaking effects and filters.

“If you want to be a serious DJ these days, you need the guts and the gear to get out on the stage and perform,” said Chris Roman, Numark Product Manager. “Orbit embraces that reality to its core, empowering DJs with performance capabilities that will need to be seen and experienced to be believed. It’s intuitive, operating like an extension of the DJ-not to mention it’s the most fun you’ll ever have on stage.”

Orbit’s live-performance design extends even to the inside of the device, where it has an embedded 2-axis accelerometer, which can be assigned to 2 different parameters per bank and activated instantly via 2 shoulder buttons. All of Orbit’s controls are fully mappable, so DJs will be able to customize their settings for effects control, transport control, volume control, or any other MIDI parameter. Numark will demonstrate Orbit for the first time at Booth 6700 at the 2013 NAMM show.

Filed under:

Comments

Game Controller Bracelet Puts Your Wrist in Control of 9 Tiny Consoles

If you’re a gamer and want to express your fanaticism without resorting something as obvious as a Space Invaders sweater or Game Boy tube dress, here’s something a little more subtle.

mirrored controller bracelet

These nifty laser-cut bracelets feature tiny versions of some of gaming’s greatest controllers. There’s everything from the modern classic Xbox 360 controller, to the jumbo-sized Dreamcast controller, and the classic NES and SNES gamepads. Though the original Atari 2600 controllers and Wii-mote are nowhere to be found – presumably due to their atypical shapes.

black joystick bracelet

The bracelets are made by Use Your Digits, and come in either mirrored, black, red or yellow acrylic. The bracelets measure about 9-inches-long and just over 1-inch wide. So unless you’re an Atari fanatic, you can outfit your wrist with one of these Game Controller Bracelets over on Etsy for about $36(USD). If you can’t afford that, you could always just wrap the cord from your old wired joystick around your wrist.

red joystick bracelet

Game Boy Becomes a Controller for Android Phone Games

If you love being able to emulate classic games on your phone but hate the clumsy touchscreen controls, there is yet another answer. Look to the ghost of gaming past and hack a Game Boy to use it as a controller on your Android phone.
gameboy android controller
It just takes some technical know-how, a few hours when you aren’t playing games, and a spare Game Boy from yesteryear. Just like that, you’ll have a mount for your Android phone that is also a controller. And it looks pretty good too.

Instructables contributor alpinedelta is set to become a geek folk hero with this mod, since we are all bugged by crappy controller options. His mod combines the case of an old Game Boy, the guts of a Wiimote and an Android phone case. Check out the video and see if you want to attempt this for yourself.

While the demo shows off a SNES emulator, it might be fun to play some old Game Boy games on it too.

[Hack a Day via Geekosystem]

God Of War 3: Ascension DualShock 3 Controller Coming Your Way

god of war ascension controller God Of War 3: Ascension DualShock 3 Controller Coming Your WayIf you are all for limited edition gaming peripherals, then you would surely fall in love with what we are about to announce, assuming you are a God of War fan as well. Sony Australia has revealed that there is a limited edition God of War DualShock 3 controller which will be released alongside God Of War 3: Ascension later this March. Yesterday, we tackled news concerning the beta version of the game’s spanking new multiplayer mode, where it will include a mayhem-inducing 4×4 team-based combat.

Well, how differently will the new limited edition controller function from a regular DualShock 3 controller? Your (educated) guess is as good as mine, where the simple answer is this – it will not be any different at all, other than the livery on the outside that clearly sets it apart visually from a boring old DualShock 3 controller and its color. It should not fetch too much on the second hard market though.

By Ubergizmo. Related articles: Ubisoft Highlights Tomb Raider Multiplayer In Latest Dev Diary, Xerneas And Yveltal Are Legendary Pokemon In Pokemon X And Y,

Giant LEGO NES Controller Works with Normal Size NES Consoles

How awesome is it that we live in a world with huge functional NES controllers? And those are just the ones we know about! Then there’s this one made by Baron Julius von Brunk, which is a bit geekier because it’s almost entirely made from LEGO.

giant lego nintendo nes controller by baron von brunk

The Baron connected the bricky buttons and the d-pad to small push buttons, which are in turn connected the circuit board of a NES controller. He built spring-loaded modules using Technic pieces to prevent the big LEGO buttons from getting stuck on the small push buttons.

giant lego nintendo nes controller by baron von brunk 2 175x175
giant lego nintendo nes controller by baron von brunk 3 175x175
giant lego nintendo nes controller by baron von brunk 4 175x175
giant lego nintendo nes controller by baron von brunk 5 175x175
giant lego nintendo nes controller by baron von brunk 6 175x175
giant lego nintendo nes controller by baron von brunk 7 175x175
giant lego nintendo nes controller by baron von brunk 175x175

The Baron likes to play his NES games on the PC, so also he connected his LEGO controller to a USB converter.

Head to Baron Julius’ blog for more details on his epic hack.

[via Nowhereelse]

Xbox 360 Bullet Buttons Get Lit up

I’ve already swapped out the buttons on one of my Xbox 360 controllerswith some bullet buttons, and they look cool. But now I’m really jealous because somebody is now selling a bullet button mod that actually lights up. Sweet.

led bullet mod xbox controller 1

DeadEye Modz takes actual 9mm brass bullet casings, drills out the centers, and mounts colored LEDs inside of them so you know which button is which by color, not just by touch like with other bullet mods. The installation process is pretty straightforward, but unlike other button mods, you’ll need basic soldering skills to attach the LEDs and resistors to the board to provide power. Instructions are provided, so if you’re reasonably handy, it shouldn’t be a big deal.

led bullet mod xbox controller 2

There’s also a matching, light-up Xbox Guide button – made from a shotgun shell – and available in a variety of LED colors of your choice.

led bullet mod xbox controller 3

A full set of LED bullet buttons is $20.99(USD) over on Etsy. The shotgun shell guide button sells for $12.99. And if you’ve got lots of money to burn and don’t feel like modding your own controller, you can always go for this fully-pimped-out customized controller for $259.99:

led bullet mod xbox controller 4

NES Controller Wireless Mouse: Great with Emulators

Back in 2008, Daniel Jansson designed a concept mouse based on the NES controller. Instructables member champx turned the concept into reality and made a wireless mouse that actually uses parts from an NES controller.

nes controller mouse by champx

As you can see, the champx’s mouse doesn’t look exactly the same as what Jansson imagined, nor is it as polished, but it’s still pretty awesome. As you might expect, champx used a couple of NES controller buttons for the left- and right-click mouse buttons, and a NES controller D-pad as a scroll wheel. Champx used the base of the original mouse, then made the new body out of Makrolon, a brand of polycarbonate. Next, imagine a montage of champx gluing, hacking, sanding and painting set to the music from Punch Out, and voila!

nes controller mouse by champx 2 175x175
nes controller mouse by champx 3 175x175
nes controller mouse by champx 4 175x175
nes controller mouse by champx 5 175x175
nes controller mouse by champx 6 175x175
nes controller mouse by champx 175x175

Head to Instructables to see how champx made the mouse. Surprisingly this is actually his third take on a NES controller mouse. He also posted his other builds on Instructables; his first build is literally the entire NES controller itself used as the body of a mouse.

[via Damn Geeky]

Arduino launches Esplora open source controller

Tinkerers take note, because Arduino has launched its new Esplora controller, which just so happens to be customizable and open source. The Esplora is derived from the Arduino Leonardo, but unlike its predecessors, it comes equipped with a number of sensors and buttons out of the box. That means it should be at least relatively easy to just jump in once your Esplora arrives.


Among other things, the Esplora comes with a temperature sensor, an analog joystick with a central push-button that’s reminiscent of the clickable joysticks on the Xbox 360 and PS3, a set of four push buttons, a three-axis accelerometer, a buzzer, and a microUSB port. On the upper left corner of the controller is where you’ll find the reset button and a group of LED status lights. The Esplora is also expandable, as it features two TinkerKit inputs and outputs, along with a TFT display connector, so you can connect a color LED screen or an SD card.

Since the board is already equipped with everything it needs to run, all you’ll have to do is connect it to a computer using the microUSB port and you’re on your way. Users can program the Esplora using Arduino’s downloadable software, and the company has set up a getting started page for those who are eager to get things moving. It can also appear as a regular old keyboard and mouse when connected to a computer, which means there are potential applications beyond just gaming for the Esplora.

It’s relatively inexpensive too, with the standard edition coming in at €41.90 ($54 US) and the retail edition demanding €44.90 ($58). It should be compatible with all of Arduino’s software as well, so this is one user-friendly controller. Are you planning on picking one of these up?


Arduino launches Esplora open source controller is written by Eric Abent & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

PhoneJoy Play Controller Makes Your Mobile Device a Game Console

Mobile gaming is big business today with a huge number of apps and games available for all manner of portable devices and computers. More and more people are turning away from traditional portable game consoles and meeting their mobile gaming needs using a smartphone or tablet. The big downside to this is that touchscreen controls often leave a lot to be desired.

phonejoy sg

Adding better, tactile controls is where the PhoneJoy Play comes into the picture. The Play is a portable controller that turns your mobile phone or other device into a portable game console. While there are already other mobile gamepads on the market, the PhoneJoy is unique in that its collapsible design allows you to wedge just about any brand of smartphone between the two halves of the controller.

phonejoy play 2

The device connects to your phone, tablet, PC, or other device using Bluetooth technology. The controller itself has 14 programmable buttons, as well as a pair of pressure-sensitive analog joysticks.

The PhoneJoy Play is in the prototyping stage, and currently seeking funding on Kickstarter. Right now a pledge of $50(USD) or more will get you a controller when they ship in April 2013 – assuming their funding goal of $50,000 is met.