Hasta La Gadget!

Xi3 has been one of the more inventive PC builders in the field, designing its Modular Computers in the belief that small, more upgradable desktops are the way of the future. The company is planning two new systems to further that dream, the X3A and X7A, but it wants our help: it’s running a Kickstarter funding drive until October 28th to assist the development and garner some early adopters. Put down $503 or $603 and you’ll get the entry-level X3A, a dual-core 1.65GHz (likely AMD E-450-based) PC with 4GB of RAM, a 32GB SSD and either Linux or Windows installed; splurge with $1,103 or more and you’ll get the more performance-driven X7A, which jumps to a quad-core chip with a 3.2GHz peak speed, a Windows-loaded 64GB SSD and faster graphics. Assuming Xi3 makes its target, we should see the X3A and X7A arrive in January and February respectively, with Kickstarter supporters beating the larger herd by a week. Even existing owners are accounted for through a Primary I/O Board upgrade, due before the end of this year, that carries more Ethernet and USB 3.0 ports. Crowdfunding is an unusual approach to buying that next PC, without the certainties of shopping at an online store — but we’re also dealing with an unusual PC from the get-go.

Continue reading Xi3 goes the crowdfunding route for future X3A, X7A modular PCs (video)

Filed under: Desktops

Xi3 goes the crowdfunding route for future X3A, X7A modular PCs (video) originally appeared on Engadget on Fri, 28 Sep 2012 23:59:00 EDT. Please see our terms for use of feeds.

Permalink   |  Kickstarter  | Email this | Comments

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you’d like to pitch a project, please send us a tip with “Insert Coin” as the subject line.

Going back to a physical medium isn’t just for vinyl lovers. The Impossible Project (TIP) wants to make our iPhone photos equally concrete through its extra-simple Impossible Instant Lab. Don’t worry about setting up AirPrint or otherwise jumping through software hoops: the Lab captures the screen and prints it to Polaroid-compatible instant film as a keepsake. The design is even collapsible and battery-powered in the event you’d like to hand out hard copies on the spot. It’s no hobbyist effort, either, with a Leica designer and a former Polaroid factory both involved in making the Lab a reality. TIP is planning to move beyond its initial iPhone 4 and 4S support to include future iPhones and, if all goes well, more commonplace Android hardware.

Investing in this Kickstarter project sidesteps novelties like t-shirts in favor of the real product — and provides a very strong incentive to buy early. Backers quick on the trigger can pay as little as $149 for a Lab with a voucher for free film, or about half the $299 retail price. Pay the full cost and you’ll get a special black version with an extra voucher, while $2,000 will provide both a gold edition and a trip to the ex-Polaroid factory in Enschede, The Netherlands. Cameras could be in retro photographers’ hands as soon as February, but only if TIP reaches its $250,000 funding goal by October 8th. If your parents would like a little more than a Facebook photo gallery as a souvenir, or Instagram just isn’t nostalgic enough, you can hit the source link to show support and make the Instant Lab real.

Continue reading Insert Coin: Impossible Instant Lab makes iPhone photos tangible

Filed under: Cellphones, Cameras

Insert Coin: Impossible Instant Lab makes iPhone photos tangible originally appeared on Engadget on Mon, 10 Sep 2012 15:59:00 EDT. Please see our terms for use of feeds.

Permalink   |  Kickstarter  | Email this | Comments

Nikola Tesla may not have gotten all the credit he was due in his lifetime, but his stature has grown considerably since, and many of the inventions he dreamed up are now finding new life in today’s technology. Now, a new effort is underway to truly cement his place in history — even moreso than having David Bowie play him in a movie. Two days ago, Matthew Inman of The Oatmeal comic strip launched an Indiegogo campaign to help fund a Tesla museum at the site of Nikola Tesla’s laboratory in Shoreham, New York, and it’s now already raised over $500,000. That money will go directly to the non-profit Tesla Science Center, which has been attempting to buy the property for $1.6 million, half of which will be covered by a matching grant from the state of New York (meaning the goal for the campaign is $850,000, although anything raised above that will go toward the actual building of the museum). As Inman notes, however, even raising “just” $850k will ensure that the property isn’t sold to someone else and demolished, as others have been looking to do. Those interested in contributing can find all the details at the links below.

Filed under: Science

Campaign to build Nikola Tesla museum hits $500k in less than 48 hours, hopes to raise $850k originally appeared on Engadget on Fri, 17 Aug 2012 15:47:00 EDT. Please see our terms for use of feeds.

Permalink   |  Indiegogo, The Oatmeal  | Email this | Comments

Miss out on your chance to snag the Android-based gaming console during OUYA’s Kickstarter tour-de-force? Worry not, friends. The outfit has opened up pre-orders it promised for those who didn’t take the plunge initially via on its website. While you will have to wait another month to get your mitts on a kit of your very own, the second round of advance purchasing will set you back $109 for US customers and $119 for those abroad. Included in the aforementioned price tag is the console, a single controller and the requisite shipping costs. Hit up the source link below to part with your funds and begin the waiting period.

Filed under: Gaming

OUYA console pre-order now available for non-backers starting at $109, slated to ship in April originally appeared on Engadget on Thu, 09 Aug 2012 10:53:00 EDT. Please see our terms for use of feeds.

Permalink Slashgear  |  OUYA  | Email this | Comments

To date, there have only been a handful of watch projects on Kickstarter, and of those, there really have only been a couple that grabbed my attention.  But here’s an interesting one that just popped up on PleaseFund.us, a new crowd-funding site that looks to be a direct Kickstarter competitor.

Terranaut Watch is bringing an oversized (50mm) watch to market, but one that they feel will “wear” signigicantly smaller, due to the lugs being hidden and the 13mm case. I’m not the biggest fan of watches over 46mm – but if their design choices work out, this could be an interesting one to keep an eye one.

The most interesting thing, however, is that they are crowdfunding the manufacture so you, the buyer, and pony up if you want the piece.

So, why crowdfund?  They’ve actually got some intriguing developments along with the watch that they’re shooting for.  First off, they want to create a carbon fiber case – which, if you ask me, is a pretty nice upgrade over plastic cases.  Second, they’re working to develop a glow-in-the-dark strap.

Not that the strap itself will glow in the dark, but that the stitching will.  I’m a sucker for anything that lights up a watch in the dark, so this is really intriguing.  Plus, this 26mm strap should be nicely padded, so it looks like it would be a comfortable one.

It’s a Citizen/Miyota movement, and has had some components painted to keep things looking nice on the inside of the case. They had initially considered a Swiss quartz movement, but of the two they tested, one broke, and the offered a horrible user experience.  

The watch itself looks to come in four variations including a choice of bezels (stainless or black) and dials (60 second or 24 hour layout). They’re looking for £3,500 and your pledge is refunded if it doesn’t fund. The piece costs £175.00.

There are also cheaper funding levels on their project page, so you can decide what level to get in on before it closes in August. You can also read up on their website, or follow them on Twitter.