Hasta La Gadget!

UK-based Cambridge Audio has long made very well-regarded high-end audio equipment, but recently that’s a market that has changed considerably, thanks to the advent of digital audio and online streaming services. The company has changed, too, and one example of that change is the new Minx Xi all-in one streaming device, which adds to Cambridge Audio’s growing family of digital-focused Minx products.

Basics

• Wi-Fi & Ethernet
• 2x USB 2.0
• Toslink Optical audio in
• Digital S/PIDF input
• BT100 Bluetooth receiver included
• 2x RCA inputs
• 3.5mm audio input
• Headphone out
• 2x speaker out
• Subwoofer out
• Built-in Dual Wolfson WM8728 DAC
• MSRP: £600, $899 in the U.S.
• Product info page

Pros

• Excellent sound
• DAC works wonders for Bluetooth or when connected via optical to a Mac

Cons

• Wi-Fi but no AirPlay support

Design

Cambridge’s Minx Xi is not dramatically different from what you might expect of any home theatre or hi-fi stereo component device; it’s essentially a black box (or white, if you choose that option) with ample venting on top, a face with knobs and buttons, and a rear with the majority of inputs and outputs. But small design flourishes make this a very attractive, and decidedly modern piece of stereo kit.

The rounded rectangle border that surrounds the face is a nice touch, and frames the tall and wide display nicely. The display itself provides just enough information for easy navigation, without overwhelming or drawing the eye unduly. The low-res, basic LCD readout is a little behind the times in a market flooded with OLED panels, but it’s actually pretty refreshing in its retro appeal, and still gets the job done just as effectively as more advanced screens.

The Minx Xi case houses a lot of complicated internals, but it’s still relatively compact, and would look at home either in a stereo cabinet or on its own atop a dresser, bookshelf or cupboard. Paired with Cambridge Audio’s new Aero 2 bookshelf speakers, it makes a good-looking and minimalist setup that’s still capable of putting out impressive enough sound even for watching the occasional Hollywood blockbuster.

Features

Movies are now where the Minx Xi shines, however. Instead, it’s at its most impressive when it’s working with streaming audio, an area that’s always a challenge when it comes to sound quality. The Minx Xi connects direct to your network via Wi-Fi or Ethernet, and can stream thousands of Internet radio stations directly, access BBC’s iPlayer feeds, subscribe to podcasts and more – without the need for a computer or mobile device for playback.

The Minx Xi does a great job of making even, for example, the 128kbps BBC Radio 4 stream sound excellent, with terrific channel division and a natural rendering of voice and music. If you’ve been listening on computer speakers or even a very capable standalone radio, you’ll probably actually be amazed that what comes through the Minx Xi is the same thing as what you’re used to listening to, the difference is that marked.

Subscribing to podcasts on the Minx Xi is as simple as registering your unit via the web and inputting RSS feeds via that dashboard. This provides you direct access to the latest episodes, and again, its ability to really highlight high-quality voice recording comes through.

The Bluetooth adapter included is external, but it doesn’t cost any extra, and it works tremendously well. There’s generally a big step down in quality when you’re listening to anything streaming via Bluetooth, even though it’s gotten a lot better over time. With Cambridge’s BT100 and the Minx Xi’s special Bluetooth DAC capabilities, performance of A2DP streams get a big boost.

Performance

Just to expand on what I already mentioned above, the Bluetooth streaming powers of the Minx Xi make it so that streaming from your mobile device and listening through headphones is in some cases arguably better than listening to the stream on the device itself. It really is that good. That said, it leaves me wishing even more that Cambridge had included AirPlay functionality on the Minx Xi, since Apple’s Wi-Fi audio streaming protocol offers better performance than Bluetooth to begin with.

Performance for streamed connections is excellent, as mentioned, with 802.11n support and no drop-outs for streams during my usage. Connected to my Mac as a DAC, and used in tandem with both the Aero 2 speakers and my Sennheiser HD 598 headphones, the Minx Xi really starts to show off its magic abilities in terms of boosting audio that you might not even have realized could be improved to begin with.

With both locally resident files, and streaming services like Rdio, the Minx Xi delivers noticeable improvements in quality to attached audio output devices, versus having that same hardware simply plugged directly into the Mac. There’s significant improvement in sound separation and clarity on all files and streams, in my testing experience.

Bottom Line

The Cambridge Minx Xi isn’t an impulse purchase for most at £600 ($899 MSRP in the U.S.), but it’s a big step up in terms of the audio quality not only for Internet radio and service streams, and also for connected computers and devices. The service library is a little limited for my liking (Pandora and Rhapsody, but no Rdio/Spotify!), and I’d love AirPlay, but Cambridge Audio does say that firmware updates will be pushed out regularly, and support for those kinds of things could follow.

That fact that it improves any source dramatically with a built-in DAC that would be expensive on its own, and also operates as a very capable and fairly comprehensive audio streaming box in and of itself, makes this a very desirable piece of kit for anyone looking to take their digital listening habits to the next level.

If you’re an audiophile, then you’re probably not too thrilled with the audio output from most smartphones. This gadget kicks things it up a notch by transforming your phone into a mobile hi-fi system.

The V-MODA Vamp Verza case takes its cues from the original Vamp for iPhone 4/4S and includes a 150mW × 2 headphone amplifier, paired with high quality Burr Brown and AKM digital-to-analog-converters and a 2200 mAh battery pack. The Vamp Verza can be used as a hi-fi USB audio amp, and its additional battery will power your phone for another 7 hours. You can even attach your phone to the face of the Vamp, using the optional Metallo case.

The Vamp Verza comes in matte black, red/black, and white/orange colorways for $598 (USD). The Metallo case is currently available for the iPhone 5 and Samsung Galaxy S III and sells for about $100.

[via V-Moda]

Feel that? If you’re an audio purist, the sensation of your wallet tingling is probably a familiar experience. This time, you have Meridian to thank, which is aiming to help you get the most from your nice headphones. The company just debuted the Explorer: a portable, USB-powered DAC and headphone amplifier that’s priced at $299. Like all external DACs, the unit promises better sound quality than typical onboard solutions can deliver, and as a high-end touch, the Explorer offers asynchronous USB audio for greater timing precision and reduced jitter. Alongside the 3.5mm amplified headphone output, you’ll also find another 3.5mm jack that supports both analog and mini Toslink connections. Each Explorer is built in the UK and measures approximately 4.0 x 1.25 x 0.7 inches. Perhaps most importantly, though, its design doesn’t reek of something that was cobbled together in the garage.

Filed under: Home Entertainment

Comments

Source: Meridian Audio

The rise of streaming audio over AirPlay has made it possible to wirelessly play music from your iPhone over your home speakers. But that data comes through as a raw stream of 0s and 1s, and the sound quality isn’t that great. More »

The Galaxy S III was widely tipped to possess a Wolfson digital-to-analog converter for high quality audio output — a feature not seen in this range since the first Galaxy S. That notion has just been confirmed by the Scottish electronics firm itself, which says its WM1811 Audio Hub has been selected for use in Sammy’s flagship. The chip promises “crystal clear voice call quality” and “enriched audio playback for music and video” thanks to its 24-bit hi-fi DAC, active noise reduction circuits and other wizardry. The GS II, meanwhile, used a Yamaha DAC to convert digital data (e.g. in an mp3 file) into an analog signal that could drive a speaker (for example in your headphones), but even if most people couldn’t hear the difference, audiophiles have insisted they preferred the sound in the older Galaxy. The only question remaining, which the PR after the break does not expand upon, is whether the Wolfson hardware is found in all variants of the new phone. Check out the More Coverage links for further reading.

Update: Francois Simond (aka Supercurio) tweeted us to say that the US variant of the GS III uses Qualcomm’s own WCD9310 for audio, not the Wolfson. Yup, it’s that multi-talented Snapdragon S4 again.

Continue reading Wolfson confirms the Samsung Galaxy S III uses its audio chip

Wolfson confirms the Samsung Galaxy S III uses its audio chip originally appeared on Engadget on Tue, 26 Jun 2012 05:58:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments