How Low Earth Orbit Astronauts Are the New Pioneers

How Low Earth Orbit Astronauts Are the New Pioneers

The first element of the International Space Station (ISS) launched over fifteen years ago, on November 20, 1998. For more than thirteen years at least two human beings have been continually living off the surface of our planet. Assembly of the Space Station is now complete. It is being utilized by its crews and scientists from around the world to execute its primary mission – scientific investigations that can only be accomplished in the microgravity environment of Low Earth Orbit (LEO).

Read more…


    



This Arduino hackaphone was never going to be pretty, but it does the job

This Arduino hackaphone was never going to be pretty, but it works

Okay, we’ll admit that it looks a bit like a baby monitor. But in contrast to those over-engineered pieces of parenting paraphernalia, this DIY cellphone can actually make calls and send texts over GPRS. More importantly, Hackaday claims it was put together by a lone hacker (“Victorzie”) from an assortment of off-the-shelf and modded parts, including a TFT touchscreen, lithium ion battery, charging circuit, GPRS module and shield. These components were hooked up to an Arduino Uno microcontroller running a barebones UI and then jammed into a 3D printed case, which makes the device look far more pocketable than some previous hackaphone efforts. The end result inspires big respect for the creator, but also, more grudgingly, for the pro engineers at places like Nokia, who can pull all this stuff together and even get it FCC-approved for just a few dollars.

Filed under: ,

Comments

Source: Hackaday

Homebrew 8-bit computer packs in 16 cores, multitasks like a champ

DNP 16core homebrew computer built out of ATMegas, multitasks beautifully

It looks like Jake Eisenmann has done it again. A couple of years after the hobbyist hacker built his first 8-bit computer, he’s cobbled together yet another one, but this time with a whopping 16 cores. Appropriately dubbed the DUO Mega, the multicore wonder is made with 16 ATMega328p microcontrollers, each connected to an 8-bit data bus and designed to interpret a custom bytecode that runs the software. Compiled inside a nondescript plastic bin, the machine is also comprised of 16MHz crystal oscillators attached to each of the aforementioned cores, three Arduino UNO boards, 32kb of SRAM, 512kb of flash memory, eight breadboards, an Ethernet shield, a VGA out port and a multitude of components that combine to look like that mess of wires seen above. Because of all that processing power, this relatively primitive machine multitasks beautifully and can perform complicated calculations at an impressive clip. To get a demo of what this marvelous feat of DIY computing can do, have a peek at Eisenmann’s video, complete with an 8-bit soundtrack, after the break.

Filed under:

Comments

Via: Hackaday

Source: DUO Mega

Hack a Day modder builds a custom controller for disabled gamers

Hack A Day A custom gaming controller for disabled gamers

Sure, when tinkerer Caleb Kraft found out that pressure switches marketed at the disabled were massively overpriced, he got mad like anybody else. But then he decided to get even the best way he knew how: by building his own, and posting the plans for all to follow on Hack a Day for free. The project came about via a kid with muscular dystrophy named Thomas, who enjoyed Minecraft but may eventually lose the ability to hold a controller or use a mouse and keyboard. Caleb’s idea was to build low-pressure switches using a 3D printer and simply map them to the Minecraft keyboard and mouse commands using a $20 Teensy board. He posted his plans online, but since he feels they could be improved on, also created a site called the Controller Project (see the More Coverage link). From there, those in need of a custom device can make a request, other modders can post their own plans and builders can use them to make controllers for donation. Since more is always merrier for such things, if you have those skills or know someone who needs them, hit the source for more info.

Filed under:

Comments

Source: Hack a day

Build your own 80,000 volt Thor hammer, what could possibly go wrong?

Build your own 80,000 volt Thor hammer, what could possibly go wrong

When someone says “The idea is extremely simple, a tiny tesla coil inside a fake hammer” we look up “simple in the dictionary just to check. This is Hack a day though, where simple can mean almost anything — in this case a genuine electrified Mjölnir replica. All you need to make your own is the aforementioned tesla coil (you have one right?), some foam, a battery pack and, well… the ability to follow instructions. Fittingly, the first attempt at Thor’s hammer went on a saga of its own, suffering damage at the hands of the delivery service en route to a studio. No bother for our resident hacksters though, who patched it back up in no time to the fully functioning — if a little over-sized — model you’ll see in the video past the break.

Filed under: ,

Comments

Source: Hack a day

Oculight LED hack gives the Oculus Rift a hint of peripheral vision (video)

Oculight hack gives the Oculus Rift a hint of peripheral vision video

Although the Oculus Rift is one of the more ambitious attempts at making virtual reality accessible, its lack of peripheral version is all too familiar — it’s much like staring into a pair of portholes. Rather than let the disorientation persist unaltered, though, Hack A Day has taken matters into its own hands. Its Oculight hack puts an RGB LED strip inside the headpiece, with the colored lighting set to match the edge of the screen through Adalight code. The result is much like Philips’ Ambilight, but arguably more useful: the virtual world’s light “leaks” into the wearer’s real peripheral view, adding to the immersion. Oculight clearly isn’t for sale and needs a refined installation to create the ideal effect, but the readily available resources will let anyone with an Oculus Rift development kit build their own solution.

Filed under: ,

Comments

Source: Hack A Day

Simple wallet hack uses magnetic alarms to stave off pickpockets

Simple wallet hack uses magnetic alarm to stave off pickpockets

We just wrapped up our tour of duty at MWC dodging the notorious pickpockets in Barcelona, so perhaps that’s why we’re particularly intrigued by Cabel Kraft’s anti-snatch wallet hack over at Hackaday. Most billfold alarms rely on a light trigger, which can be problematic if the thief squirrels away his prize for a later reveal. Kraft solves that issue by using magnetic alarms — the sort attached to windows for break-in alerts — that set off when the wallet is removed from the victim’s pocket. He did have to remove a lot of the alarm’s bulk and alter the location of the reed switch, but the setup seems otherwise uncomplicated. If you’d like to prevent your wallet from getting picked and have some soldering chops to boot, have a peek at Kraft’s handiwork at the source or just view the video after the break.

Filed under:

Comments

Source: Hackaday

Your Portal gun isn’t as cool as Hack-a-Day’s Portal gun (which actually levitates a companion cube)

Your Portal gun isn't as cool as HackaDay's Portal gun which actually levitates a companion cube

There you were, thinking your NECA-produced Portal gun replica was super neat all on its own. Well, okay — it is — but wouldn’t it be even cooler if you could use it to make a baby companion cube levitate in mid-air with it? That question is exactly what lead to Hack a Day’s creation of just such a device, as seen in the video below the break. By reappropriating a magnetic floating globe’s parts and attaching said parts to both the gun and a homemade companion cube, Hack a Day were able to recreate at least part of the magic Chell experiences in her Aperture Science adventures. Of course, if you move the gun too much, the companion cube will fall out. Just think what that does to its psyche! You monster.

[Image credit: Caleb Kraft, Hack a Day]

Continue reading Your Portal gun isn’t as cool as Hack-a-Day’s Portal gun (which actually levitates a companion cube)

Filed under: ,

Your Portal gun isn’t as cool as Hack-a-Day’s Portal gun (which actually levitates a companion cube) originally appeared on Engadget on Fri, 12 Oct 2012 02:29:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceHack a Day  | Email this | Comments