Hasta La Gadget!

It’s early morning. You’re running around, grabbing your stuff and throwing everything in your bag, and just as you’re about to leave, you double back inside to grab your iPhone from the kitchen table – only it’s not there. So you waste another ten minutes or so trying to find your phone before finally rushing out of your apartment. Sound familiar?

Well, here’s one solution for you: the MagSkin magnetic skin for your iPhone. It’s a thin decorative skin that “magnetizes” your iPhone so you can just stick it on your fridge when you’re not using it. That way, it’s always going to be there for you to just grab when you need to go.

The MagSkin is actually a Kickstarter project by Daniel Weyer in a bid to de-clutter his counter from all the wires and devices he and his wife had. If you have a couple of smartphones and music players, then the MagSkin can probably work on them, too, so you can stick everything onto your refrigerator.

The fact that they’re available in a wide range of colors, some shade shifting and thermo-sensitive, doesn’t hurt on the stylish end either.

A minimum pledge of $12(USD) will get you one of your very own MagSkins over on Kickstarter. Aside from that, you’ll also be getting two MagDocks, which are magnetic backings that will convert any surface into a docking area for the MagSkin-wearing device.

Apple and HTC might be at each other’s throats in court, but they’re living in peace and harmony in Pioneer’s world. The fresh new SMA wireless speaker line supports both Apple’s AirPlay format and HTC Connect-certified DLNA to take audio over WiFi no matter whether it’s coming from an iPhone or a One S. Proof that we can all get along is good in itself, but Pioneer is also throwing in Wireless Direct, a trick that turns the speaker into its own WiFi access point if it can’t latch on to a nearby router. Pioneer’s stratification of the range is dictated by whether you value freedom or raw power. The XW-SMA1 is the baseline with two 3-inch speakers and a 3 / 4-inch tweeter, with a bass reflex port doing its best to mimic a subwoofer; the XW-SMA3 is the exact same with a lithium-ion battery good for six hours of cord-free play, and the XW-SMA4 goes battery-free but rolls in a proper 4-inch subwoofer and an extra tweeter. The lot arrives in August and costs either $299 for an SMA1 or $399 for either of its premium siblings.

Zach Honig contributed to this report.

Continue reading Pioneer SMA wireless speakers put AirPlay, HTC Connect in one happy family (update: hands-on photos)

Pioneer SMA wireless speakers put AirPlay, HTC Connect in one happy family (update: hands-on photos) originally appeared on Engadget on Tue, 26 Jun 2012 22:34:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

The wait between iOS 6’s unveiling and its planned fall release just got a little bit shorter, as Apple has just pushed out beta 2. If you’re in the developer crowd that can try it out, don’t expect any revelations: the primarily focus is on the bug fixes that nudge the software closer to a final release. As in past years, multiple additional betas are expected between now and the time the iOS 6 is ready to come to the general public, so there’s likely still lots of room left for Apple to polish the release to a shine. Those paid up on their developer accounts can grab the update through the usual means and see just how much luster has been added since WWDC.

[Thanks to everyone who sent this in]

Apple sends iOS 6 beta 2 to developers originally appeared on Engadget on Mon, 25 Jun 2012 14:32:00 EDT. Please see our terms for use of feeds.

Permalink   |  9to5 Mac  | Email this | Comments

Although the form factor and actual size are still unknown, TechCrunch has independently verified that Apple is working on adding a 19-pin port, replacing the current 30-pin port, to the new iPhone. It is a move that will surely send shocks through the iPhone accessory ecosystem.

The new port, partially shown in this Mobilefun post as well as in this video, is similar in size to the Thunderbolt port available on many MacBook devices but I’ve been told by three independent manufacturers that the pin-out will be different.

Apple’s 30-pin ports have been the standard since Apple released the third generation iPod. The connectors offered structural stability when connecting to most accessories but it’s clear – especially with the introduction of the MagSafe 2 port – Apple is more concerned with space savings inside each device.

Three independent manufacturers all agreed that the 19-pin dock port is in the works and many accessory manufacturers are facing an uneasy few months as they wait for official news of the standard to be announced.