World’s lightest and thinnest circuits pave the way for ‘imperceptible electronics’

Researchers from Asia and Europe have developed the world’s lightest and thinnest organic circuits, which in the future could be used in a range of healthcare applications.

Lighter than a feather, these ultrathin film-like organic transistor integrated circuits are being developed by a research group led by Professor Takao Someya and Associate Professor Tsuyoshi Sekitani of the University of Tokyo, who run an Exploratory Research for Advanced Technology (ERATO) program sponsored by the Japan Science and Technology Agency (JST), in collaboration with Siegfried Bauer’s group at the Johannes Kepler University (JKU) Linz, Austria.

The circuits are extremely lightweight, flexible, durable and thin, and conform to any surface. They are just 2 microns thick, just 1/5 that of kitchen wrap, and weighing only 3g/m^2, are 30 times lighter than office paper. They also feature a bend radius of 5 microns, meaning they can be scrunched up into a ball, without breaking. Due to these properties the researchers have dubbed them “imperceptible electronics”, which can be placed on any surface and even worn without restricting the users movement.

The integrated circuits are manufactured on rolls of one micron thick plastic film, making them easily scalable and cheap to produce. And if the circuit is placed on a rubber surface it becomes stretchable, able to withstand up to 233% tensile strain, while retaining full functionality.

“This is a very convenient way of making electronics stretchable because you can fabricate high performance devices in a flat state and then just transfer them over to a stretchable substrate and create something that is very compliant and stretchable just by a simple pick and place process.”

This prototype device is a touch sensor featuring a 12×12 array of sensors on a 4.8 cm x 4.8 cm circuit. It is made up of two layers, an integrated circuit layer and a tactile sensor layer.

With the development of these plastic electronics, the possibility for flexible, thin, large area electronics has been realized. In the future, the group would like to expand the capabilities of these circuits.

“The new flexible touch sensor is the world’s thinnest, lightest and people cannot feel the existence of this device. I believe this development will open up a wide range of new applications, from health monitoring systems, wearable medical instruments, and even robotic skins in the future.”

The results of this research were published in the July 25, 2013 issue of the journal Nature.

This content is provided by DigInfo.tv, AkihabaraNews Official Partner.

Via: University of Tokyo

Dummy cursors keep your passwords safe from prying eyes

This is a system for preventing password theft, by mixing several dummy cursors in with the real cursor.
The software keyboards used in online banking are effective against key loggers, but by taking screen captures or looking over your shoulder, people would be able to work out your password.
With this system, only the user knows which cursor is the real one, so there’s no concern about people stealing passwords just by being able to see the screen.
“At first sight, it looks as if …

Photoshop-like interior light control interface

“This is a lighting system, called Lighty. There’s a group of robotic lights on the ceiling, and their orientation and brightness can be controlled through this interface.”
“This feels just like Photoshop. To specify which places you want bright or dark, all you need to do is color in the corresponding areas.”
In this system, the interactive pen display is used to paint the room in light or darkness, with a camera placed in the ceiling returning the results in real …

Shader Printer uses heat-sensitive ‘paint’ that can be erased with low temperatures (hands-on video)

Shader Printer uses heatsensitive 'paint' that can be erased with low temperatures handson video

Lovin’ the bold look of those new Nikes? If you’re up to date on the athletic shoe scene, you may notice that sneaker designs can give way long before your soles do. A new decaling technique could enable you to “erase” labels and other artworks overnight without a trace, however, letting you change up your wardrobe without shelling out more cash. A prototype device, called Shader Printer, uses a laser to heat (at 50 degrees Celsius, 120 degrees Fahrenheit) a surface coated with a bi-stable color-changing material. When the laser reaches the “ink,” it creates a visible design, that can then be removed by leaving the object in a -10 degree Celsius (14 degree Fahrenheit) freezer overnight. The laser and freezer simply apply standard heat and cold, so you could theoretically add and remove designs using any source.

For the purposes of a SIGGRAPH demo, the team, which includes members from the Japan Science and Technology Agency and MIT, used a hair dryer to apply heat to a coated plastic doll in only a few seconds — that source doesn’t exactly offer the precision of a laser, but it works much more quickly. Then, they sprayed the surface with -50-degree Celsius (-58 Fahrenheit) compressed air, which burned off the rather sloppy pattern in a flash. There were much more attractive prints on hand as well, including an iPhone cover and a sneaker with the SIGGRAPH logo, along with a similar plastic doll with clearly defined eyes. We also had a chance to peek at the custom laser rig, which currently takes about 10 minutes to apply a small design, but could be much quicker in the future with a higher-powered laser on board. The hair dryer / canned air combo offers a much more efficient way of demoing the tech, however, as you’ll see in our hands-on video after the break.

Continue reading Shader Printer uses heat-sensitive ‘paint’ that can be erased with low temperatures (hands-on video)

Filed under: ,

Shader Printer uses heat-sensitive ‘paint’ that can be erased with low temperatures (hands-on video) originally appeared on Engadget on Wed, 08 Aug 2012 16:54:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceSIGGRAPH  | Email this | Comments