Hasta La Gadget!

The only upgrades available for our puny human hands are gaming controller calluses, but if you’re sporting an i-LIMB digits hand prosthesis, you can now grab a set of improved fingers. Touch Bionics’ “smaller, lighter and more anatomically accurate” appendages are now available worldwide, as well as a new wrist-band unit which houses all the necessary computing power and juice for their function. Best of all, these developments allow more people to adopt the tech than the previous generation, including those with more petite hands or finger amputations closer to the knuckle. We don’t know how much it’ll cost for a fresh set, but we’ll let health agencies and insurance companies deal with that part. With these upgrades and RSL Steeper’s latest offering, it won’t be long before our flesh-based variants are meager in comparison.

Continue reading Touch Bionics releases new prosthetic fingers, flips the old ones the bird

Filed under: Misc, Robots, Wearables

Touch Bionics releases new prosthetic fingers, flips the old ones the bird originally appeared on Engadget on Sat, 29 Sep 2012 03:26:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you’d like to pitch a project, please send us a tip with “Insert Coin” as the subject line.

Parallel computing is normally reserved for supercomputers way out of the reach of average users — at least at the moment, anyway. Adapteva wants to challenge that with its Parallella project, designed to bring mouth-watering power to a board similar in size to the Raspberry Pi for as little as $99. It hopes to deliver up to 45GHz (in total) using its Epiphany multicore accelerators, that crucially, only chug 5 watts of juice under normal conditions. These goliath speeds currently mean high costs, which is why they need your funds to move out of the prototype stage and start cheap mass production. Specs for the board are as follows: a dual-core ARM A9 CPU running Ubuntu OS as standard, 1GB RAM, a microSD slot, two USB 2.0 ports, HDMI, Ethernet and a 16- or 64-core accelerator, with each core housing a 1GHz RISC processor, all linked “within a single shared memory architecture.”

An overriding theme of the Parallella project is the openness of the platform. When finalized, the full board design will be released, and each one will ship with free, open-source development tools and runtime libraries. In addition, full architecture and SDK documentation will be published online if-and-when the Kickstarter project reaches its funding goal of $750,000. That’s pretty ambitious, but we’re reminded of another crowd-funded venture which completely destroyed an even larger target. However, that sum will only be enough for Adapteva to produce the 16-core board, which reportedly hits 13GHz and 26 gigaflops, and is expected to set you back a measly $99. A speculative $3 million upper goal has been set for work to begin on the $199 64-core version, topping out at 45GHz and 90 gigaflops. Pledge options range from $99 to $5,000-plus, distinguished mainly by how soon you’ll get your hands on one. Big spenders will also be the first to receive a 64-core board when they become available. Adapteva’s Andreas Olofsson talks through the Parallella project in a video after the break, but if you’re already sold on the tiny supercomputer, head over to the source link to contribute before the October 27th closing date.

Continue reading Insert Coin: The Parallella project dreams of $99 supercomputers

Filed under: Misc

Insert Coin: The Parallella project dreams of $99 supercomputers originally appeared on Engadget on Fri, 28 Sep 2012 12:19:00 EDT. Please see our terms for use of feeds.

Permalink   |  Kickstarter  | Email this | Comments

Do you recall those fancy business cards that took a design cue straight out of your adored Facebook Timeline? Well, the company behind such neat idea is now working on bringing cards equipped with NFC technology, which will allow folks to add things like email address, URLs and even pinpoint locations for easy access via any maps application. Of course, most of this information can already be shared using typical business cards, but one of the biggest pros with the Near Field Communication method will be the ability to change this info at any given time without having to purchase a whole new set. Moo plans on having the NFC-ready cards available to the masses by 2013 — that said, the startup’s currently running a beta program where it will allow 150,000 lucky folks get a complimentary card with their order of a traditional sheet. There’s a video demo down below for you to check out, and you should probably act fast if you’re looking to get one for yourself ahead of the extensive rollout.

Continue reading Moo.com working on NFC-equipped business cards, kicks off limited beta program today

Filed under: Misc

Moo.com working on NFC-equipped business cards, kicks off limited beta program today originally appeared on Engadget on Thu, 27 Sep 2012 19:44:00 EDT. Please see our terms for use of feeds.

Permalink The Next Web  |  Moo  | Email this | Comments

We’ll have to give it to AT&T for going with something a wee bit different than what we’re accustomed to seeing in the world of handy MiFis — but with touchscreens apparently being a thing nowadays, it also shouldn’t surprise us that the company chose to go this route. Either way, the newly introduced MiFi Liberate will surely be of help to those who need to stay connected while on the go, offering features such as LTE connectivity (provided the network’s live in the area, of course), simultaneous pairing of up to 10 WiFi devices, 11-hour battery life, a microSD slot, DLNA capabilities and, as you can see above, a 2.8-inch touchscreen display. Unfortunately, the carrier didn’t say when we can expect the Liberate to be up for grabs (or for how much), with a company representative only telling us that it’ll be at some point “in the coming months.” While we wait for those details, however, feel free to check out the extra pic located just past the break.

Continue reading AT&T’s new MiFi Liberate is LTE-capable, ‘world’s first’ with touchscreen display

Filed under: Misc, Peripherals, Wireless

AT&T’s new MiFi Liberate is LTE-capable, ‘world’s first’ with touchscreen display originally appeared on Engadget on Thu, 27 Sep 2012 14:48:00 EDT. Please see our terms for use of feeds.

Permalink   |  AT&T  | Email this | Comments

A $2,300 3D printer isn’t really anything special anymore. We’ve seen them as cheap as $350 in fact. But all those affordable units are of the extrusion variety — meaning they lay out molten plastic in layers. The FORM 1 opts for a method called stereolithography that blasts liquid plastic with a laser, causing the resin to cure. This is one of the most accurate methods of additive manufacturing, but also one of the most expensive thanks to the need for high-end optics, with units typically costing tens-of-thousands of dollars. A group of recent grads from the MIT Media Lab have managed to replicate the process for a fraction of the cost and founded a company called Formlabs to deliver their innovations to the public. Like many other startups, the group turned to Kickstarter to get off the ground and easily passed its $100,000 within its first day. As of this writing over $250,000 had been pledged and the first 25 printers have already been claimed.

The FORM 1 is capable of creating objects with layers as thin as 25 microns — that’s 75 percent thinner than even the new Replicator 2. The company didn’t scrimp on design and polish to meet its affordability goals either. The base is a stylish brushed metal with the small build platform protected by an orange plastic shell. There’s even a companion software tool for simple model creation. You can still get one, though the price of entry is now $2,500, at the Kickstarter page. Or you can simply get a sneak peek in the gallery and video below.

Continue reading FORM 1 delivers high-end 3D printing for an affordable price, meets Kickstarter goal in 1 day

Filed under: Misc

FORM 1 delivers high-end 3D printing for an affordable price, meets Kickstarter goal in 1 day originally appeared on Engadget on Wed, 26 Sep 2012 18:46:00 EDT. Please see our terms for use of feeds.

Permalink   |  Kickstarter  | Email this | Comments