Y-Drum Portable Drum Set Concept: Roadie Friendly Percussion

The traditional drum set is one of the least portable musical instruments, which is why beginners are usually left with practice pads while their bandmates are out wooing tone deaf chicks just by showing up with a guitar and unwashed clothes. This portable drum set could change all that if it became a real product.

y drum portable drum set concept by kevin depape

Industrial designer Kevin Depape is the one who came up with the set, which he calls the Y-Drum. It consists of 9 pads, 2 cymbals, a Bluetooth module and a companion app, either mobile or desktop. Just lay out the pads, link them to the app, select a drum kit and you’re ready to practice. All of the hardware is stored in a box that doubles as an amplifier.

y drum portable drum set concept by kevin depape 2

I like how the drumsticks are used as the handle of the box. Clever.

y drum portable drum set concept by kevin depape 3

It sounds like it would be a blast to own, but Yanko Design commenter the great vashhhnu points out a possible flaw: the user can’t just play it on any surface, not unless they’re okay with shoulder pains. It may not be much of an issue if you’re just going to whack on one of the pads for 15 minutes, but for extended sessions, the great – and helpful – vashhhnu suggests either including pedestals for the Y-Drum or requiring the user to find a knee-high surface for the pads to minimize pain and the risk of injury.

You can read more a bit more about the Y-Drum on page 25 of Kevin’s Issuu portfolio.

[via Yanko Design & Kevin Depape]

Epiphany OnE Puck Turns Heat to Electricity: World’s Most Useful Coaster

Are you unimpressed by the current crop of portable battery chargers on the market? Boy, you’re hard to impress. But even with your high standards, there’s a good chance you’ll be interested with the Epiphany OnE Puck. It doesn’t need electricity, light or salt water. All it needs is a hot or cold object, and it’ll pump out electricity in return.

epiphany one puck heat engine usb charger

Epiphany Labs claims that its device is a Stirling engine, which works by cooling down fluid trapped inside it. In the process of cooling, some of the thermal energy from the heat source is eventually transformed into electric energy. The company didn’t go into details about the specific components of the OnE Puck, only that if you apply sufficient heat – say, from a cup of steaming hot coffee – on its red side or if you significantly cool down its blue side – as shown above – then it will be able to generate up to 5W of power, enough to charge most smartphones.

A pledge of at least $115 (USD) on Kickstarter lets you reserve your own OnE Puck. As of this writing, the fundraiser has already raised more than half of its $100,000 target with 55 days to go. But if I were you, you might want to wait until Epiphany Labs provides more details about the device before pledging. After all, they haven’t answered the most important questions: What are its minimum and maximum temperature tolerances? Can you hang it over a bonfire or place it in your freezer? And exactly how hot (or cold) does an object have to be to cause the device to generate enough charge? Can Lambert of Technabob get one for free? So many questions.

[via CNET]

Mauz Transmogrifies iPhones into a 3-in-1 Pointing Device

There are already a variety of apps that turn iOS and Android devices into wireless mice or trackpads or both. Some of them are even free. But a company called Spicebox thinks you’ll want to pay for a peripheral that does just about the exact same thing. Will you want to spend some dollarz for its Mauz?

mauz iphone mouse accessory

As shown in the image above, Mauz plugs into the dock connector of an iPhone 4, 4S or 5. It has three main modes, the first of which turns an iPhone into a mouse-cum-touchpad that has virtual left- and right-click buttons as well as a scroll wheel. Its second mode turns iPhones into a motion-sensitive controller, akin to a Wii controller. Spicebox says users will be able to map commands from various programs into gestures, from controlling your browser to your videogame character.

mauz iphone mouse accessory 2

Finally there’s the visual gestures, a Kinect-like control mode that lets you execute commands just by waving your hand above your iPhone’s camera.

Pledge at least $49 (USD) on Kickstarter to reserve a 30-pin Mauz and at least $59 for the Lightning-compatible Mauz. I’m quite intrigued at the possibilities of this so-called “appcessory”, but this is one of those gadgets that needs great complementary software to succeed.

[Mauz via Gadgetell]

D-Link DIR-508L SharePort Go II: All Your Connections Are Belong to Us

Road warriors who need on-the-go networking will be happy to hear about D-Link’s latest SharePort Go. This handy gadget is designed to allow all of your gadgets to remain connected to the Internet no matter where you are.

d link shareport networking router

Your Wi-Fi compatible gadgets connect to the D-Link DIR-508L SharePort Go II via its personal wireless network. A broadband Internet connection of some sort will need to be connected to the SharePort Go, which will then share this connection to all devices within its range. You can plug in an Ethernet cable, a 3G or 4G USB adapter, or it can even hook up to a Wi-Fi hotspot to share online access with multiple devices.

d link shareport networking router usb

While the same can certainly be achieved with a cellular hotspot, the SharePort Go II does provide more flexibility. It also comes with a built-in 4,000 mAh rechargeable battery, which can also be used to juice up some of your gadgets. Hook up a USB flash drive, and you’ll have your own personal shared storage device, using the mydlink SharePort app.

The D-Link DIR-508L SharePort Go II will be available this April for about $120(USD).

[via Ubergizmo]

YASHICA – HS-420W – Wi-Fi hand-held scanner

Here’s a really handy and convenient gadget – a Wi-Fi hand-held scanner (YASHICA HS-420W), currently sold by GEANEE INC. Just turn on the scanner and slide it on whatever you would like to scan. That’s it. Your time is limited? Scanning A4 size paper can be done in 2-12 seconds, depending on image quality and colors. Once you’ve finished sliding the scanner over what you want to scan, forward the data to your personal computer, iPhone/iPad, smart phone or tablet and …

GameStick final design and docking station unveiled

The GameStick is the newest in a line of Kickstarter success stories, and the company is working overtime to get the design of the new portable Android-powered gaming console just right. And thanks to all of the backers who submitted feedback, the final design of the GameStick controller has been unveiled, as well as new docking station to go along with it.

398024_529192460454047_646999647_n

The design of the HDMI dongle itself has stayed the same, but the controller underwent some changes based on feedback from the Kickstarter backers. The controller features a more curvy design, and the HDMI stick now sits at the back of the controller instead of sliding in on top. The GameStick also got an expendable microSD card slot on the stick itself, which was a huge request from the backers.

Dock

The new docking station charges up the controller wirelessly using electromagnetic coils, and it can also support peripheral hardware such as mice, keyboards, etc. for use with the GameStick. The docking station also has a memory card slot compatible with up to 64GB, boosting the GameStick’s total capacity to 104GB potentially.

At the time of this writing, the GameStick has received over $515,000 in funding, which surpasses the company’s initial goal of $100,000. The campaign has just under 70 hours remaining, so there’s still time to contribute and get on the list to receive a GameStick console if you’re still interested.


GameStick final design and docking station unveiled is written by Craig Lloyd & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Meta Wearable Augmented Reality Computer: Project Glass Meets Leap

Google made a lot of people excited about the future when the company showed off a concept video for the Project Glass computer. A month after that, a some of us wet our already wet pants some more when the Leap controller was unveiled. And now we have the Meta, which as far as I can tell is a combination of those two products.

meta wearable augmented reality computer with gesture tracking

According to its press release[PDF], Meta was founded by Meron Gribetz in December 2012 with help from Columbia University Professor Steven Feiner, a computer scientist who specializes in wearable computing, 3D user interfaces and augmented reality, among other things. Most of the company’s 15 employees are also from Columbia University, including Gribetz himself. Whereas Google seems to prefer the use of voice commands for their wearable computer, Meta is putting its money on gesture control, hence the need for a 3D camera.

Like Google, Meta has yet to reveal concrete details about their product. So which future would you rather have? The one where everyone’s talking to the air or the one where we’re all waggling our arms about? Just kidding. The future will obviously contain a lot of both. And people bumping into things.

[via Meta via Geeky Gadgets]

PDJ Portable Disc Jockey is a complete DJ system that fits in your pocket, we go hands-on (video)

PDJ Portable Disc Jockey is a complete DJ system that fits in your pocket, we go hands-on (video)

We’ll forgive the extremely nice folk behind the PDJ when they claim to have the first fully self-contained portable DJ set-up. But that’s not to say that there is nothing new here — in fact there’s plenty. The PDJ is a rectangular slab of refreshing creative optimism. On each end is a touchscreen display that shows a virtual turntable, and in the middle is a small mixing and FX section. So, already the PDJ will be familiar in set-up to any DJ who picks it up (something the Pacemaker couldn’t claim with its proprietary interface). The mixer section has rotaries for volume, FX and additional functions (more on this later). The most important thing, however, is the onboard audio interface which crucially means you can monitor in headphones before unleashing your mix onto the world. This sets it apart from pretty much every other mobile app out there that, at best, requires you to use an audio splitter (to the detriment of your sound). Of course, you’re going to need some music to play, and there’s 2GB of internal storage to let you do just that. If that’s not enough, or you want to load up your latest jams right away, there’s an SD card slot to let you do just that (up to 32GB). Beyond headphones, there’s a line out for connecting it to a sound system, and a line in and microphone jack for adding external sound to the set. The brochure claims it offers 12 hours of battery life too — rechargeable by mini USB. On the software side, the two virtual turntables respond to touch, and button controls (for cue / play / pause). In addition to the virtual turntable, there are also sample player and one-shot screens. We got out paws on the PDJ here at NAMM, so fade past the break for our impressions.

At about 286 grams, the PDJ is light to hold, but sits in the hand comfortably. Your thumbs naturally find their place hovering above the virtual decks, but the unit it plenty light enough that you can hold it with one hand, while using the other for more dexterous performance manoeuvres. The rotaries and crossfader in the middle section are plastic, but feel solid enough. This is, after all, a lightweight portable device. The LCD touchscreens let you get hands on with your music, as DJs are wont to do, and it’s responsive and intuitive enough. Thankfully, most of the key functions (cue, volume, fade, loops etc) have hardware controls too. To reach the extra functionality (more in depth EQ, sample player and so on) you swipe the screen to the left or right accordingly to bring up the relevant screen. It’s in these cases when the dual-mode (rotate and click) Function A/B rotaries come in handy, and the interface for controlling these extra tricks is surprisingly natural / responsive.

The PDJ makes the usual claims about being able to scratch and so on. And you can. But as with all these smaller, touch-digital devices, it’s more of a party trick than anything else. No biggie though, as the meatier features are the beat sequence and music-pad sections. These let you bring your own audio into your set, trigger samples and build beats and jams on the fly — much more suitable to a digital device such as this. While we only spent a short time with the PDJ, it’s easily one of the most fun devices that we’ve seen here at NAMM. Purists might malign the constant attempts to shrink and gameify DJing, but we say you’re thinking about it too much. Throw one of these in your bag, and the next time you’re on the train and want to mix in headphones, or find yourself at a party, the PDJ will suddenly make a lot more sense. How much and when you say? Well expect to pay about $600 for the privilege sometime around late spring or summer.

Billy Steele contributed to this report.

Filed under: ,

Comments

SOUL launches Party in a Box P910 wireless speaker system

There’s definitely no shortage of portable wireless speakers nowadays. We definitely saw a bunch of them at CES a couple weeks ago, and we’re continuing to see them as time goes on. However, while the speaker market is getting relatively saturated, there are still a few solutions that stand out from the crowd, the P910 “Party in a Box” being one of them.

Screen Shot 2013-01-24 at 3.02.47 PM

While the P910 might look like a typical speaker system, the company assures us that it’s not. SOUL claims that the PIAB P910 is the first speaker to sport different functions that’s rolled into one package — it’s an indoor/outdoor portable sound system with Bluetooth, auxiliary input, an Apple dock, and HDMI.

Screen Shot 2013-01-24 at 3.03.24 PM

The box has eight omnidirectional speakers, including two 6.5-inch subwoofers, two 3-inch midrange speakers, and four 1-inch tweeters. Furthermore, the box has a built-in Tri-Band two-way transceiver that allows syncing between up to eight other speakers either through Bluetooth or the 3.5mm auxiliary input.

Essentially, the PIAB P910 can act as a boombox, a PA system, or even a Karaoke machine thanks to its microphone input. Of course, though, versatility and excellent sound quality will cost you big time — SOUL is selling the PIAB P910 for $999 on their website, but if you’ve been looking for a portable, multi-functional speaker system, it may very well be worth the cash.


SOUL launches Party in a Box P910 wireless speaker system is written by Craig Lloyd & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

GCW-Zero Open Source Gaming Handheld: Straight out of Pandora’s Box

A new challenger steps in the niche market… ring of portable consoles built to run emulators of older systems. But like the relatively famous Pandora handheld, the GCW-Zero aims not just to let players enjoy old games but also let those with programming skills tweak and play with its software.

gcw zero open source gaming handheld device

The GCW-Zero runs on OpenDingux, a Linux distribution that was originally made for Dingoo’s gaming handhelds. Hardware-wise the GCW-Zero has a 1GHz Injenic CPU, a Vivante GC860 GPU, 512MB DDR2 RAM and 16GB of internal memory. It also has a microSD slot that supports micro SDHC cards up to 32 GB or micro SDXC cards up to 64 GB, a mini-USB port and a mini-HDMI 1.3 out, which is a nice surprise. The controls are mostly what you’d expect – a d-pad, an analog nub, 4 face buttons, 2 shoulder buttons, select and start buttons – except the GCW-Zero also has an accelerometer, so it supports tilt controls.

gcw zero open source gaming handheld device 2 175x175
gcw zero open source gaming handheld device 3 175x175
gcw zero open source gaming handheld device 4 175x175
gcw zero open source gaming handheld device 175x175

Here’s a video of a few games running on the handheld, courtesy of GCW-Zero lead tester Kirk Shepherd:

You can check out more videos of the handheld on Shepherd’s YouTube channel. But if you think this is the portable videogame museum for you, pledge at least $135 (USD) on its Kickstarter fundraiser to reserve a unit. Can you imagine just how much money Nintendo, Sony, Sega and the other old guards would make if they put their heads (and licenses) together and released an all-conquering retro handheld?

[via Gear Diary]