Samsung VP confirms work on a watch, among other future products

Samsung VP 'We've been preparing the watch product for so long'

Rumors of a new smart watch are following more than just one particular tech company, and like Apple there have been suggestions Samsung is working on such a product. Bloomberg reports mobile executive VP Lee Young Hee said during an interview that “We are preparing products for the future, and the watch is definitely one of them.” As to when, he only indicated it would be important to be the first one to commercialize it so consumers can use one meaningfully — something samsung should know, since it’s built many watch / phone combos over the years. ” There’s also no word on what a Samsung watch would be like (that’s the S9110 touchscreen watchphone from 2009 pictured above) so until hardware is actually unveiled, we’ll just have to use our imagination.

Filed under: ,

Comments

Source: Bloomberg

Smartwatch Developers Rejoice! Pebble Will Release Proof-Of-Concept Watchface SDK In Early April

pebble-outdoors

After much fanfare the Pebble smartwatch made the leap from fanciful concept to full-fledged product earlier this year, but now that units have started to ship and people have started to wear them, what’s Pebble’s next step?

Why, enticing developers, of course. Pebble founder Eric Migicovsky noted in a backer update video released earlier this morning that an early version of the smartwatch’s watchface SDK would be made available to would-be Pebble developers during the second week of April.

And when I say “early version,” I mean early version. At this stage it’s being looked at as more a proof-of-concept release than anything else, and Migicovsky points out that there’s a “99% chance” that the team will revamp some of the underlying APIs involved. What’s more, anyone expecting the ability to use the SDK preview to tap into the Pebble’s sensors and radios (like the accelerometer for tracking movement) will come away disappointed — the release is geared strictly toward new watchfaces, though Migicovsky says that games are also fair game as they rely mostly on button inputs.

The early SDK has been in testing with “hacker” backers — a group of about 100 people who pledged $235 or more for the privilege of early tinkering rights — for the past few months, and some of the apps they’ve created will be released alongside the SDK. The most notable new app? A low-res (and therefore faithful) reproduction of Snake that hearkens back to Nokia’s feature phone glory days.

Granted, new watchfaces may not seem like the most crucial addition even to Pebble buffs, but the impending release marks a pretty dramatic shift in scope for the Pebble team. What once started as a company whose daily operations were completely dictated by the need to manufacture and ship over $10 million worth of gadgets is now a company gearing up to focus on the next stage of the Pebble’s life cycle: building up the app ecosystem so the value of owning a Pebble extends beyond the wow factor of wearing a tiny e-paper display on your wrist. Migicovsky concedes that Pebble hasn’t “done the best job so far of communicating with developers,” but the team looks very willing to change that — hopefully a full-blown version of the SDK shows up sooner rather than later.

Update 34 – Pebble Watchface SDK in April from Pebble Technology on Vimeo.

New Watchfaces coming to Pebble soon

For those of you who have received your Pebble E-Paper watches, and for those of you who are about the get it soon, here’s some great news for you. Pebble is planning on releasing its Watchface SDK to developers during the 2nd week of April. This SDK will allow developers to create their own watchfaces for the Kickstarter prodigy. Pebble has seen some extraordinary watchfaces released by the Pebble developer community, like a watchface that lets you play “Snake”, so by releasing this SDK and garnering more developer support, Pebble can be brought to the next level.

Pebble to release SDK for E-Watch in April

Pebble says that the watchface SDK is still a work-in-progress, and that it’s mostly just a “proof of concept”. It wants developers to note that the watchface SDK will not allow them access “to the accelerometer (or magnetometer), or communication between watchfaces and smartphones (among other deficiencies).” There’s a good possibility that 99% of the APIs in the SDK will change “as we move towards a full blown SDK”.

Pebble also plans on releasing a firmware update next week as well. The firmware version, 1.9, helps improve user experience. Your watchfaces are now at the bottom of the stack, meaning if you keep pressing the back button, you will find your way back to your watchface. Also, by pressing the up and down buttons on the right side of your Pebble watch, you can alternate between the watchfaces you have installed. There are also “under-the-hood” changes that allows developers to more easily and quickly display text on the watches.

The new watchface SDK will open a new chapter for Pebble E-Watches. Pebble provided a few examples of watchfaces developed through the SDK, including a watchface that tells time in Dutch, a watchface with a dragon that blinks every minute, and a watchface that shows Mario (from Super Mario) grabbing a coin every minute.

Over 40,000 Pebbles E-Paper watches have been made so far, and over 85% of Kickstarter backers who ordered the long strap version of the watch will receive their watches next week. Pebble is making good progress in getting its watches out to all of its 70,000-ish backers. If you haven’t ordered the watch yet, you can pre-order it now through Pebble’s website for $150.

[via Pebble]


New Watchfaces coming to Pebble soon is written by Brian Sin & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

iWatch concept is what the iWatch should be

A new concept has been released for Apple’s pending iWatch accessory, and we’ve got to say, it looks pretty acceptable. The concept was created by MacUser Magazine, and it shows a mini iPad mini plastered onto a leather band. The design is supposed to emphasize a conventional iWatch that’s also stylish. While I do like the look of the iPad mini-esque display, I would much prefer a black band to a brown band.

iWatch concept is what the iWatch should be

The MacUser folks stated that the concept was inspired by the Smart Cover accessory for iPads. They stated that creating an iWatch could be as easy as combining an iPad Nano device onto a leather band. The leather would give the device a classic and conventional feel. MacUser stated, “We came to the conclusion that Apple’s most likely play would be to keep its watch as conventional as possible, with the feel of something classic rather than excitably innovative.

Analysts believe that Apple could take 10% of the global watch market with the iWatch. That would mean that it could make $6 billion off the device. The watch is rumored to be able to survive 5-6 days on a single charge, and there are currently 100 engineers working on the project. Many have said that if Apple could pull of the iWatch (if any company could do it, it’d be Apple), it can kill all of those rumors that say the company is not innovative without Steve Jobs.

Many sources are saying that Apple is prepping to launch the new mobile accessory this year around early Q4. The company may be accelerating the launch of the device because its investors are feeling uneasy about its deteriorating stock price. Tim Cook has been saying over and over that Apple has some “great products” that will help bring the company’s stock price back up. Do you think the iWatch will be the device to do that?

[via Tapscape]


iWatch concept is what the iWatch should be is written by Brian Sin & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Pebble says smartwatch includes Bluetooth 4.0, despite iFixit’s claim

Earlier today, iFixit posted up their teardown walkthrough of the Pebble smartwatch, and noted that the device didn’t support Bluetooth 4.0 — only Bluetooth 2.1. However, there seemed to be some confusion between the specific chips used in the watch, as Pebble has responded to the teardown, saying that Bluetooth 4.0 is indeed supported.

pebble_review_sg_26-580x394

The confusion seems to be warranted, though, as Pebble notes that while the chip used in the Pebble smartwatch doesn’t normally support Bluetooth 4.0, the company had the firmware of a different chip flashed on the ones used in the watch in order to support Bluetooth 4.0. The situation is definitely a little confusing, but Pebble says that this was done to speed up orders.

Pebble posted on Reddit the details of the situation, and note that the Pebble features a PAN1316 chip from Panasonic that uses Texas Instruments components. The chips that TI sent to Panasonic were labeled CC2560, which doesn’t support Bluetooth 4.0. However, Pebble had Panasonic simply flash the firmware of a CC2564 in order to get the latest Bluetooth support.

However, while the smartwatch does, in fact, come with Bluetooth 4.0 support, Pebble hasn’t yet switched it on in the watch’s operating system, but it seems they’ll be doing that sometime in the future, most likely with an update. It’s unclear why they’re holding back 4.0 support, but it could be a number of reasons at this point.


Pebble says smartwatch includes Bluetooth 4.0, despite iFixit’s claim is written by Craig Lloyd & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Pebble smartwatch gets torn down, not much to it

The Pebble smartwatch was all the rage on Kickstarter, and we eventually got our grubby little hands on the thing at CES back in January, with our full review being posted up last month. The amazing folks over at iFixit have also ended up getting their hands on the device, but they went about it in a different manner, completely tearing it apart to see what’s inside.

Screen Shot 2013-03-13 at 10.02.34 AM

Since the watch doesn’t have any visible screws anywhere, you have to pry the outer shell apart, and there’s certainly no lack of adhesive holding the device together. iFixit even notes that you won’t be able to take it apart without compromising the glass display. Once it’s pried off, however, you get an all-access pass to the components inside.

By removing the lone ribbon cable that makes its way through the device, you can get better access to the internals that are deep down below the e-ink display. The ribbon cable alone houses all four buttons, three LEDs, and the Bluetooth antenna, which makes it nearly impossible to replace an individual component, according to iFixit.

In the end, iFixit noticed a few key points when tearing apart the little device. First off, it’s pretty much impossible to open up the Pebble smartwatch without busting the glass display, since the watch is held to together with strong adhesive to make it waterproof. Also, the low power consumption of the device decreases the frequency that you’ll have to charge it, which increases the life of the battery in the long run, with a possible life of 10 years, according to iFixit’s estimates.


Pebble smartwatch gets torn down, not much to it is written by Craig Lloyd & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

iFixit rips apart Pebble and finds very little inside, even less that’s repairable (updated)

iFixit rips apart Pebble and finds very little inside, even less that's repairable

Generally when iFixit tears something down we’re treated to scrumptious piles of technological gore. Screws, chips, connectors and all sorts of components end up scattered around the table. With the Pebble smartwatch? Well, there’s not so much in the way of digital guts to pull out. Upon cracking open the shell, which was apparently impossible to do without shattering the screen, iFixit found a single assembly that housed all the components. Everything from the 120MHz Cortex-M3 MCU to the three-axis accelerometer and the Bluetooth radio was on a single board. It was under that Bluetooth EMI shield where the one surprise crops up. It appears that the Texas Instruments controller chosen for the e-paper watch does not support the wireless protocol’s low energy profile, something Pebble lists as one of the specs on its site (we’ve reached out to the company for clarification on this matter). As you might expect, the compact construction means this is not a particularly repairable device. So, rather than pull your own apart, just check out the electronic autopsy at the source.

Update: Well, we’ve finally heard back from Pebble and it seems the watch does have support for Bluetooth Low Energy. The confusion comes from the fact that, although the TI controller inside is label as a CC2560 (which lacks support for BLE) it actually carries the same firmware as the CC2564 which does support the protocol through Panasonic’s RF module.

Filed under:

Comments

Source: iFixit

This Apple iWatch Concept Is The Best Looking Yet

This Apple iWatch Concept Is The Best Looking Yet

The Apple iWatch rumor has been circulating for a while now as it’s rumored Apple will unveil the device by the end of this year. Regardless if they do or not, concepts are the next best thing to an actual product launch as their creators share their vision of the rumored product, and sometimes, they look better and offer cooler features than the product.

A new concept for the Apple iWatch has surfaced from designer Martin Hajek in collaboration with MacUser. Hajek’s iWatch is probably one of the best examples we’ve seen yet as it successfully combines the look of a watch with a smaller iOS device as its face. (more…)

By Ubergizmo. Related articles: iPhone 6, iPhone mini and iPhablet Concept Designs Are A Little Odd, iPhone 6 Concept Features 4.8-Inch Screen, Lack Of Home Button,

iWatch could be worth $6 billion for Apple claims analyst

Every week it seems like we have another new rumor from “sources familiar with Apple’s plans” claiming that the company is getting ready to launch a watch of one sort or another. At the same time, we continue to hear rumors that Apple is looking to get into the TV market with its own Apple HDTV. One analyst believes that Apple will probably get into the watch market before the TV market.

iwatch_concept-580x405

The analyst is Oliver Chen from Citigroup and after looking at the numbers, he believes the iWatch could be a $6 billion business for Apple. The analyst also noted that there is “plenty of opportunity for upside” assuming Apple is able to create something totally new as it did with the iPod. Chen bases his numbers off the fact that the global watch market is worth $60 billion a year.

Apple will have to capture 10% of that global watch market to hit that $6 billion number Chen thinks is doable. I would think Apple certainly has the ability to do that with an iWatch. The product would likely capture a number of people that wouldn’t have been in the watch market otherwise helping to grow the market overall.

Chen also notes that watch margins are humongous along the lines of 60% making the potential margins on the iWatch very appealing. Using these figures Chen came up with the potential gross profit of $3.6 billion for Apple if it enters the watch market with an appealing product. At the same time, if Apple entered the TV market and captured 10% it would expect a gross profit of about $1.79 billion making the watch market much more appealing.

[via ZDNet]


iWatch could be worth $6 billion for Apple claims analyst is written by Shane McGlaun & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Apple iWatch May Be Unveiled By The End Of 2013

Apple iWatch May Be Unveiled By The End Of 2013

Apple’s often-rumored iWatch has been the topic of discussion for tech enthusiasts for years now, but it seems we’re closer to hearing about an actual product than we originally anticipated as Bloomberg is reporting we could see it debut by the end of 2013.

Bloomberg’s sources, which happen to be the same sources that leaked Apple’s iWatch team stands at around 100 people, has informed them Apple hopes to have it available “as soon as this year.”

The news organization also notes Apple has filed for a total of 79 patents that include the word “wrist” in them, the most recent patent being for a “wearable accessory device” which would display video. Some of these patents even show off an illustrated iWatch-like device, which has also been adding fuel to the rumor fire. (more…)

By Ubergizmo. Related articles: Apple executive reportedly denies that the “iTV” will be launching in the near future, Apple’s iTV rumored to be in full production and could be made available through AT&T and Verizon, according to Jefferies analyst,