Baxter Industrial Robot is Human-Friendly (Thank Goodness.)

Would you believe that friendly-looking robot giving that guy a hug is an industrial robot? You probably thought they were all just arms that weld and move heavy objects. Well, most are. Baxter obviously is different.
baxter robot

Baxter is the work of roboticist Rodney A. Brooks of Rethink Robotics, and he was obviously designed to be human-friendly. The robot is made to be easily trainable by an assembly line worker, and if you grab Baxter’s hand, it will turn its head and its cartoon eyes on it’s tablet-sized face will look at you as if to say “Hey there, human.” And that’s the point.

The company is betting that in the future robots will work side-by-side with humans. Naturally, they want to be at the forefront here and are working hard to make normally dangerous bots more friendly. It sounds good, until a hug from this guy tears someones head off.

[via NYT via Neatorama]


Category 5 Hurricane Simulator Will Blow You Away, Literally.

After living in New Orleans for a number of years of my life, I can speak from experience that hurricanes can be serious business. So the more we can learn about how hurricanes and tropical storms work, the more prepared that we can be for disaster, and the more lives and property can be spared from nature’s fury. In the interest of learning more about these storms, one university has built the world’s only category 5 hurricane simulator.

hurricane simulator

The machine, dubbed the “Wall of Wind” (WoW) is basically an array of twelve massive, 700 horsepower fans, which can generate sustained winds of up to 157 MPH. Specialized technology allows it to emulate the wind turbulence of a real hurricane, and it can even simulate the driving rains of a real storm through its water-injection system.

The Wall of Wind is installed at Florida International University’s International Hurricane Research Center, at a cost of about $8 million (USD). The simulator will be used to test the structural integrity of building materials and construction techniques with the goal of improving safety and survivability of the deadliest of tropical weather.

[FIU News via Gizmodo]


Chinese Panasonic facilities damaged during protests

Civil unrest in China has resulted in demonstrations and violence against Japanese interests in the country. With many of the world’s electronics manufacturers having facilities inside China, it comes as no surprise that some of those factories have been damaged during the violence. Panasonic has issued an official statement about damage to its Chinese manufacturing operations.

So far, Panasonic reports that there were no injuries to its personnel in China. However, the company has had damage to several of its manufacturing facilities. Damage to facilities include Panasonic’s Industrial Devices Company, Qingdao factory where electric components such as switches are constructed. This factory suffered damage to the building and equipment. Panasonic says that preparations to restart operations at the factory are underway, but no ETA is available.

Panasonic also suffered damage to its Industrial Devices Company, Suzhou factory where printed circuit board materials and printed circuit boards are manufactured. Panasonic says that there was some damage to the building and equipment, but no major damage was sustained to production equipment. Operations at this plant restarted on September 17.

Panasonic’s Systems & Communications Company, Zhuhai factory where the company manufactures fixed-line phones has stopped operations and workers have stayed home. That plant was closed after 10 Chinese employees started a protest at the site. This location is preparing to restart operations. Panasonic says that it’s unable to forecast the effect of the damage at this time and will announce if damage and plant closures will affect its financial outlook at a later date.


Chinese Panasonic facilities damaged during protests is written by Shane McGlaun & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.


iFixit Tears Down iPhone 5 Early, Thanks to the Land Down Under

Since it’s already Friday, September 21st in Australia, the guys over at iFixit decided to take a trip down under, and already have their hands on a shiny new iPhone 5. As is their tradition, they’ve started the process of ripping it apart to show us what’s inside. With so many early leaks of the iPhone 5′s parts, I’m guessing there won’t be too many surprises, but it’s still always fun to get a bit of geek porn whenever a new gadget comes out anyhow.

iphone 5 teardown 1

Image Credit: iFixit

What we know so far is that the new phone looks as nice as it does in Apple’s beauty shots, and that it’s still sealed tight by their annoying pentalobe screws. On the plus side, it looks like the screen module will be much, much easier to replace than the one on the iPhone 4/4S. As already suspected, the battery is only a tiny bit more powerful than the one in the iPhone 4S, so we can only hope that the phone performs as well as Apple claims on the power-sucking 4G network. Hopefully, the new CPU and display sip less power than the prior models.

iphone 5 teardown 2

Image Credit: iFixit

Thusfar, iFixit hasn’t finished identifying all the chips inside the iPhone 5, but they have posted some images in case you’d like to start your own detective work right now. Every time I see one of these tiny motherboards, I’m blown away by the incredible advances in miniaturization over the last few years. Just think, this thing is more powerful than any PowerBook Apple ever released.

iphone 5 teardown 3

Image Credit: iFixit

You can check out the iPhone 5 teardown in progress over at iFixit right now. Be sure to refresh often as they finish up their disassembly if you want to find out all the other gory details of the internals of the latest iPhone.


LibeTech Uses QR Codes as Door Keys: Convenient or Dangerous?

Mobile phones are making a lot of things obsolete – payphones, maps, privacy – because of cheap and easy to use apps. A new open source technology might add keys – and keychains, and locksmiths – to the cellphone hit list. Called LibeTech, the system enables QR codes to be used as door keys.

libetech qr code door key

LibeTech was developed by Jeremy Blum and 3 other students from Cornell during their senior year. The system is very simple to use. Say you have a hotel reservation. All you have to do is go to a website, log in and the hotel will send you a QR code.

libetech qr code door key 2

When you get to your room, just show the QR code to the webcam at the door and you’re in. You don’t even need to own the latest smartphone to do this; any phone or gadget that can store and show the image of the code will suffice.

Of course, the convenience is a double-edged sword: someone could easily take a copy of your code. Imagine keys to entire hotels being shared on torrent sites. After much thought and consultation with fellow nerds, Blum and his colleagues have decided to make their technology open source instead of building a commercial product based around it. If you want to modernize your doors, head to Blum’s website for more details and links to the necessary code.

[via Hack A Day]


US Senate claims Microsoft avoided paying $6.5 billion in taxes

Massive US companies using loopholes to avoid paying taxes is nothing new, but a new US Senate memo gives us an idea of just how one much one company has avoided paying. According to Bloomberg Businessweek, a memo penned by Michigan democrat Carl Levin and Oklahoma republican Tom Coburn, who both head up the Senate’s Permanent Subcommittee on Investigations, claims that over the past three years, Microsoft has avoided paying $6.5 billion in US taxes. The funny thing about all of this? Microsoft hasn’t done anything illegal by avoiding that hefty tax bill.


The same goes for HP, which is another company the memo focuses on. In Microsoft’s case, the company used transactions with its subsidiaries located around the world – Puerto Rico, Ireland, and Singapore are all specifically mentioned – to save on its tax bill. With HP, the company had its off-shore subsidiaries give it short-term loans, which meant that HP had tax-free capital to put toward domestic projects. The memo precedes a Senate hearing on this issue, with HP and Microsoft both scheduled to testify today.

This isn’t just limited to HP and Microsoft either – Levin says that he focused on those two companies to highlight a problem present with a large number of US companies. Both companies claim that they haven’t done anything illegal, and that much seems to be true, with Levin blaming this problem on lax IRS enforcement and the presence of too many IRS loopholes, many of which Congress is responsible for. Of course, it’s easy to see why American companies try to avoid paying as much American tax as they can, since the 35% corporate tax rate in the US is higher than in other places around the world.

That high tax rate has technology companies like Microsoft and HP transferring “intangible assets” like patents overseas in an attempt to save a little cash. It isn’t much of a surprise to hear that all of this is going down either, since the tax code in the US is so mind-numbingly complicated that there are plenty of loopholes for companies with good lawyers and accountants to take advantage of. One thing is definitely certain, however: if Congress wants to do something to stop this problem, it has a lot of work ahead of it. Stay tuned.


US Senate claims Microsoft avoided paying $6.5 billion in taxes is written by Eric Abent & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.


US Senate claims Microsoft avoided paying $6.5 billion in taxes [Updated with Microsoft statement]

Massive US companies using loopholes to avoid paying taxes is nothing new, but a new US Senate memo gives us an idea of just how one much one company has avoided paying. According to Bloomberg Businessweek, a memo penned by Michigan democrat Carl Levin and Oklahoma republican Tom Coburn, who both head up the Senate’s Permanent Subcommittee on Investigations, claims that over the past three years, Microsoft has avoided paying $6.5 billion in US taxes. The funny thing about all of this? Microsoft hasn’t done anything illegal by avoiding that hefty tax bill.


The same goes for HP, which is another company the memo focuses on. In Microsoft’s case, the company used transactions with its subsidiaries located around the world – Puerto Rico, Ireland, and Singapore are all specifically mentioned – to save on its tax bill. With HP, the company had its off-shore subsidiaries give it short-term loans, which meant that HP had tax-free capital to put toward domestic projects. The memo precedes a Senate hearing on this issue, with HP and Microsoft both scheduled to testify today.

This isn’t just limited to HP and Microsoft either – Levin says that he focused on those two companies to highlight a problem present with a large number of US companies. Both companies claim that they haven’t done anything illegal, and that much seems to be true, with Levin blaming this problem on lax IRS enforcement and the presence of too many IRS loopholes, many of which Congress is responsible for. Of course, it’s easy to see why American companies try to avoid paying as much American tax as they can, since the 35% corporate tax rate in the US is higher than in other places around the world.

That high tax rate has technology companies like Microsoft and HP transferring “intangible assets” like patents overseas in an attempt to save a little cash. It isn’t much of a surprise to hear that all of this is going down either, since the tax code in the US is so mind-numbingly complicated that there are plenty of loopholes for companies with good lawyers and accountants to take advantage of. One thing is definitely certain, however: if Congress wants to do something to stop this problem, it has a lot of work ahead of it. Stay tuned.

UPDATE: Microsoft has just sent us a statement, commenting on the “complicated tax code” and the “exceedingly complex tax structure” we have here in the United States. The company also talks about the way it operates internationally, and the ways it has contributed to economic growth domestically. Microsoft’s statement is posted below. Additionally, if you’d like to read the full testimony given by Microsoft Corporate Vice President for Worldwide Tax Bill Sample during today’s Senate hearing, the PDF can be downloaded by clicking this link.

Microsoft has a complex business and we must comply with the complicated tax code of the United States, resulting in an exceedingly complex tax structure. That is why we’ve advocated for reforms to simplify the US tax code and make it more competitive with the rest of the world.

One of the business imperatives faced by Microsoft and many US-based businesses today is that we must operate in foreign markets in order to compete and succeed as a company. Foreign revenue growth helps support the growth of our U.S. operations, creating additional U.S. jobs and supporting an economic ripple effect that leads to greater growth in local communities. Our foreign growth has allowed Microsoft to increase our footprint in the U.S.

According to a recent study of Microsoft’s economic impact, we increased our employment by 13.2 percent in the United States from 2007 and 2009. Through our employment, compensation, and purchases of U.S. goods and services, Microsoft’s operations supported roughly 462,000 U.S. jobs. In Washington State specifically, Microsoft has been the single largest contributor to economic growth since 1990; our impact on the state accounted for 32.4 percent of the total gain in state employment.

To compete and grow, we operate a global business that requires us to operate in foreign markets. In conducting our business at home and abroad, we abide by U.S. and foreign tax laws. That is not to say that the rules cannot be improved–to the contrary, we believe they can and should be. US international tax rules are outdated and not competitive with the tax systems of our major trading partners. We believe the US should reform its tax rules to support the ability of worldwide American businesses to compete in global markets and invest in the US.


US Senate claims Microsoft avoided paying $6.5 billion in taxes [Updated with Microsoft statement] is written by Eric Abent & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.


LIFX: Smartphone-Controlled LED Lightbulb: There’s An App For That!

Have you ever wanted to control the lights with your smartphone? Now you can, thanks to LIFX Smartbulbs. There have been already some LED lightbulbs that could be controlled by a remote. Now, you can use an app to control the mood of your room – or your entire house – from the comfort of your phone.

lifx led smartbulb app

LIFX Smartbulbs are naturally energy efficient. One LIFX smartbulb will last 40,000 hours or 25 years, and reduce power consumption by up to 20% from conventional bulbs. Bulbs can be turned off and on, and change the color of the glow to suit your mood. And unlike some remote bulbs, you can control multiple bulbs and multiple locations from a single smartphone iOS or Android app. The app can also match the mood of your tunes, wirelessly. It will beatmatch the music that you are listening to.

lifx led smartbulb app house

The bulbs are also able to detect when you arrive home and turn on the lights for you, and can even be programmed to wake you up naturally, gradually glowing brighter and brighter.

LIFX was launched as a Kickstarter project, and at the time of writing, it had amassed over $1,100,000 of a humble goal of $100,000 – with 55 days of funding left. Needless to say that this project will be made. You’ll have to pledge $69(USD) to get one bulb, or $119 for a pair, or $196 for four bulbs. Further discounts are available for larger quantities. Expected delivery for the LIFX smartbulb is March 2013.

 [via The Awesomer]


MakerBot Replicator 2 Desktop 3D Printer Prints Just About Anything

In the realm of awesome computer peripherals, I think the new MakerBot Replicator 2 desktop 3D printer is probably the most epic of all. After all, it’s a peripheral for your computer that you can actually use to make 3D objects you can hold in your hands. It’s like an action figure creation station.

makerbot replicator 2

The MakerBot Replicator 2 features a 100-micron layer resolution – about as thin as a sheet of paper. That means it’s able to produce true-to-life replicas, without those ridges you’re accustomed to seeing on cheap desktop 3D printers. Plus, you can build large objects of up to 410 cubic inches in volume, so you can print something measuring 11.2-inches by 6.0-inches by 6.1-inches.

makerbot 2 example model

The 3D printer is optimized to use MakerBot PLA Element, which is a renewable bio plastic, available in numerous colors. That material is popular for 3-D printing thanks to its strength and its ability to make large objects without cracking or warping.

The device also comes with new and updated software to make printing easier and faster, and it works with Windows, Linux or Mac OS X. The biggest downside to the Replicator 2 is the cost, at $2199(USD) it’s not exactly something we can all have at home.


Skube: The Last.fm & Spotify Radio

If you’re like me, you’ve probably got some tunes playing while you tackle your daily workload. Depending on if you use Last.fm or Spotify, the Skube might be an interesting way to share your music. It has a lot of retro design appeal, and the skewed cube look is pretty neat.

skube last fm spotify radio retro player

Skube was developed to stream online music, directly from the popular music services Spotify and Last.fm. The music player is supposed to facilitate the decision-making process of picking tracks. Skube has two modes: playlist and discovery. Playlist plays all the tracks on your Skube while discovery looks for similar tracks that will suit your taste. When different Skubes are connected together, they act like one player and shuffle through all playlists.

It’s currently been built into a fully-working prototype that uses an Arduino, Max/MSP and an XBee wireless network. It’s definitely a cool concept and I hope it gets launched into production soon.

skube last fm spotify radio retro player row

skube last fm spotify radio retro player yellow

[via NOTCOT]