CyberNotes: Opera Tips & Tricks

This article was written on October 03, 2007 by CyberNet.

CyberNotes
Web Browser Wednesday

As we’ve shown before, Opera is an extremely customizable browser, but it does so much that it can be difficult to remember it all. Then again you would have to know what it does in order to remember it. 🙂

Today we want to walk you through a dozen tips and tricks that will inch you closer to becoming an Opera grand master. So lets go ahead and jump into it, and as always, hit us up with your tips in the comments!

–Bookmark & Folder Nicknames–

Opera has a nickname feature for bookmarks that I’m guessing most people use. With it you can enter in an abbreviation for a bookmark that can quickly be typed into the address bar to pull up a particular site. One thing that you may not have realized is that the nicknames can also be assigned to entire folders of bookmarks, and entering that into the address bar will open every site within that folder:

Opera Folder Nickname

–Bookmark & Open Multiple Links–

Let’s say you’re on a sight such as Digg, and you’re trying to quickly go through all of the news. Enter Links Panel! The Links Panel (a.k.a. sidebar) will let you handle hyperlinks throughout the page in bulk. You can Ctrl+Click or Shift+Click to select multiple links from the current page. Then just choose the bookmark or open the option from the right-click menu.

Opera Bulk Link Management

–Click to Save Images–

Do you find yourself frequently saving images from websites? Instead of right-clicking on an image to save it each time, just Ctrl+Click on it. You’ll immediately be prompted with a Save As dialog box for you to enter in the name, or you can just press Enter to use the image’s current name.

[via Opera Watch]

–Customize the Browser’s Name and Icon–

Did you know that you change the name of the browser, and even replace its icon with your own? Yep, that’s all built-in. To change the icon you’ll need to enter opera:config#UserPrefs|ApplicationIcon into your address bar, and then provide the location of the icon you want to use.

To change the browser’s name, just enter opera:config#UserPrefs|Title into the address bar, and in the box type the name you want to appear. Additionally, you can use these combinations to insert dynamic items:

  • %t for page title (entering just %t in the box will remove the browser’s name all together, which is what I currently do)
  • %s for build number
  • %v for version number

In this example I choose to display the browser’s name before the title of the page:

Opera Change Browser Name 

[via Tamil]

–Detach/Move a Tab–

Want to open a tab up in a new window? Just drag it onto the title bar of the browser. You can also move tabs between multiple windows simply by dragging and dropping them from one tab bar to another.

Opera Detach Tab

–Fast Navigation–

If you’re trying to open several links on a page, you should try using Shift+Arrow keys to move between the hyperlinks on the page. The nice thing is that this doesn’t jump back up to the beginning of the page where the first hyperlink appears. It starts with the first hyperlink in the area that you are looking at.

Shift+Ctrl+Enter will then open the currently selected link in a background tab.

–Fit to Width–

When you come across a site that requires horizontal scrolling, why not try and enable the Fit to Width feature (located in the View Menu, or press Ctrl+F11). The site will be adjusted so that no horizontal scrolling is necessary, and for the most part it won’t look all that bad.

Opera Fit to Width

–Hide the Menu Bar–

I hardly ever need to use the Menu Bar, and it takes up more room that I’m willing to part with. So what I do is I add a button that will remove the Menu Bar, and at the same time provide all of the menu options in a single condensed drop-down list. Just click here to add that button, and for more menu buttons visit the Opera Wiki.

Opera Menu Bar

–Hide the Tab Bar for a Single Tab–

In Firefox when you only have one tab open, the tab bar is not visible, and there is an option in Opera to do the same thing. Just right-click on the Tab Bar, choose the Customize option, and then check the box that says “Show only when needed.” The tab bar will now be hidden anytime only one tab is open.

Opera Hidden Tab Bar

–Right-Click Address Mapping–

It’s super easy to map any address on a site using your favorite map service. Here’s what you have to do:

  1. Open up your favorite map service (ex. Google Maps or Yahoo! Maps).
  2. Right-click in the service’s search box, and choose the Create Search option. Enter in a keyword (it’s required by Opera, but isn’t used in this trick), and then press Save.
  3. The next time you see an address on a site just highlight it with your mouse, right-click, and then go to “Search with.” You’ll see a list of all the possible search engines that you’ve added to Opera, and all you have to do is select the mapping service.

Opera Map Search

–Promptless Downloading–

If you’re like me you probably save all of your downloads to the same folder so that you don’t end up with things scattered all over your computer. In Opera you can set your default download location in the Options, and then when you right-click on a file or image, there will be a “Save to download folder” option. Clicking on that will initiate the download without prompting you for any information.

Opera Quick Download

–Speed Dial Homepage Button–

This is something that I was yearning for, and luckily the Opera Community came through. For reasons unknown to me, the Opera developers never associated an address to the Speed Dial page. That meant you couldn’t assign it as your browser’s homepage, but dragging this button onto the address bar will do the trick. It will take on the look of the homepage button, but it will actually open the Speed Dial page.

Copyright © 2013 CyberNetNews.com

CyberNotes: Run Command Power Tips

This article was written on January 01, 2008 by CyberNet.

CyberNotes
Time Saving Tuesday

Run CommandOne of the greatest features in Windows has always been the Run command. It’s such a simple concept, yet if exercised properly, can be a power user’s dream come true. What we’ve got in store for you today might be a little much to absorb all at one time, but rest assured that once you become accustomed to how the Run command works you’ll be thankful that it is at your beckon call.

For starters it is important to know how you can bring up the Run command. In any version of Windows it can be done by using the keyboard shortcut WinKey+R. The odds are pretty good that there will also be an option located in the Start Menu labeled Run, or if you’re using Vista the search box essentially serves as a Run box as well (clever, huh?). Now lets get going running…

The Run box has a lot of different elements to it. There is the box where you enter in your command, the OK and cancel buttons, and, oh, I guess that’s pretty much it. Don’t mistake the simplicity for weakness! 😉

Run Box

Here are some of my favorite things you can do with the Run command:

Quick Tip: Capitalization is ignored in the Run box, so don’t worry about whether you accidentally capitalize a letter or not.

  • Launch a program – If there is a program that you’ve installed, such as Firefox or Nero, you can launch them by simply typing in the name of their main executable file in the Run box pictured above. For example, to run Firefox simply type firefox into the box, or to run Nero type nero. This will only work for applications that have been installed on the computer.
  • Open a Control Panel item – You can open every single Control Panel option from the Run command, assuming that you know the proper command needed. Each Control Panel command starts with the word control (which by itself will open the Control Panel), and is then followed by the name of the item that you want to open. For example, to open the Mouse properties type control mouse into the Run box, or control printers for the printer configuration. Microsoft has a helpful guide with some of the commonly used Control Panel options listed.
  • Shutdown a remote computer – By using a command such as shutdown /r you can restart the computer you’re using, but that’s not where the command comes in real handy. Assuming that you know the name or IP of a computer on your network you can actually shutdown or restart it from your own Run box. Just type shutdown /m \\MACHINE /r where “MACHINE” is the name or IP address of the computer you want to restart. If you just want to shutdown the computer leave off the “/r” on the end. More information on using the shutdown command can be found here.
  • Remote Desktop – We’ve showed you how to create a shortcut for some of your Remote Desktop destinations, but you can also use it with the Run box. To connect to a computer with the IP address 192.168.0.101 just enter mstsc /v:192.168.0.101 into the box. For a few more parameters that you can use consult our last article.
  • Refresh your IP address – In the past I’ve had troubles with our ISP, and I would frequently have to get a new IP address in order for my Internet to continue working. That could simply be done by entering ipconfig /renew into the Run box, which disconnects the computer from the network and then reconnects it again. The ipconfig command can be used in a lot of other ways as well, all of which can be found here.

There are many other things that the Run command can be used for, but those are the things that make it useful for me. In doing my research I came across an extensive list of things that can be used in the Run box, but many of them only apply to Control Panel items.

We know that many of you are Run command guru’s, so let us know what you use it for in the comments below!

Copyright © 2013 CyberNetNews.com

Install and Enable Restricted Drivers in Ubuntu

This article was written on October 20, 2007 by CyberNet.

One of the new things in Ubuntu 7.10 is the one-click enabling of restricted drivers (a.k.a. proprietary drivers). This is important because it will give users the best experience possible, and I’ve received several inquiries in our Ubuntu 7.10 from people wondering how they are supposed to enable these drivers in Ubuntu.

After you install Ubuntu 7.10 it will check to see if there is any hardware on your computer that has a corresponding restricted driver. If a match is found, you should see a little icon and balloon pop up in the tray notifying you of the available drivers:

Ubuntu Restricted Drivers Balloon

If you happen to close out of the balloon, or you lose the icon there is still an easy way for you to get it back. You’ll find a menu option for enabling the drivers by going to System -> Administration -> Restricted Drivers Manager:

Ubuntu Restricted Drivers

From there you can enable restricted drivers in Ubuntu, or you can also disable them by using the checkbox next to the respective device. When I tried to do this for my ATI X1400 graphics card I got hung up with an error message saying “xorg-driver-fglrx is not enabled“. I didn’t really have any idea what this meant, but I quickly found out that I had to enable a few more settings before I would be able to proceed. If you go to System -> Administration -> Software Sources you will see a checkbox that you can tick for “proprietary drivers for devices (restricted)“. I checked that box, and then I started receive an error “Could not apply changes, Please fix broken packages first“. So out of desperation I checked all of these boxes:

  • Canonical-supported Open Source software (main)
  • Community-maintained Open Source software (universe)
  • Proprietary drivers for devices (restricted)
  • Software restricted by copyright or legal issues (multiverse)

Ubuntu Software Sources Proprietary Drivers

Low and behold I was able to go back to the Restricted Drivers Manager, and enable the proper drivers for my ATI graphics card (click screenshot to enlarge):

Enable Restricted Drivers

There were multiple reasons that I wanted to get the proprietary drivers installed, but the biggest one was that Ubuntu doesn’t recognize my native widescreen resolution without them. The other reason was to get the 3D support so that I could have some fun with Compiz Fusion, but that opened up another can of worms! I ended up getting Compiz Fusion to work, but I’ll save that story for another day.

Hopefully this solves any issues you may be having with trying to install the restricted drivers on Ubuntu. I was hoping that it would be a one-click solution, but it didn’t quite turn out to be that way. Luckily the workarounds necessary were not all that tedious.

Copyright © 2013 CyberNetNews.com

How to Bulk Email, Copy, Print and Delete Photos on Your iPhone and iPad

This article was written on May 20, 2011 by CyberNet.

A few weeks ago I was talking to someone who had said what a pain it was to manage their iPhone and iPad photos in bulk. They told me that there were about 20 pictures they took that didn’t turn out well, and in order to remove them from their phone they had to go through and delete them one-by-one. Ouch! I could see how that would be frustrating, but there is a much simpler way that not many people seem to know about. Here’s what you need to do:

  1. Open the Photos app on your iPhone or iPad.
  2. Tap the arrow in the upper-right corner of the screen.
    Bulk edit photos button
  3. Most people I’ve talked to realize you can select multiple photos by tapping on them individually from this screen, but the cool thing is that you can tap and hold on the first photo you want to select and then slide your fingers across all of the photos you want to share/copy/delete. Unfortunately the screen won’t scroll as your finger reaches an edge, but this trick should still ease the process of selecting a lot of photos.
    Bulk delete photos
  4. Tap the Share, Copy, or Delete button depending on which operation you want to do.

Note: You can repeat Step 3 to deselect items you didn’t mean to select.

So the key things you need to remember once you enter the selection screen is to tap, hold, and slide. From there you can send the photos through Email or MMS (limited to 5 photos at a time), copy them to the clipboard, print them, or delete them from your iOS device.

 

Copyright © 2013 CyberNetNews.com

How to Speed Up Downloads With Your Current Internet Connection

This article was written on December 15, 2009 by CyberNet.

Our internet connections have become faster over the years, but with that our need for speed increased too. And sadly, having a fast internet connection does not mean the server you’re downloading from gives you the speed you pay for. That’s where download managers come in. One of their more interesting features involves speeding up your downloads. So how exactly do they do it?

Getting the software
Before showing you the tricks, let’s have a look at some good download managers. If you’re a Windows user, I’d recommend Free Download Manager (freeware) or GetRight (shareware that never expires). Another big name in the download manager business is Download Accelerator Plus, but I advise you to stay away from that one because it is ad-supported and tends to slow down your system.

Trick 1: chop the download in pieces
fdmtest-1.jpgHow long does it take to transport 20 people from point A to point B with one taxi? A lot longer than when you have multiple cabs at your disposal. It’s just like that with the internet: in most cases one connection is doing all the work, even though your pipe can handle more than one. When you let a download manager chop your download in segments, simultaneous connections with the server are established that enable you to download different parts of your file at the same time. Often referred to as segmented downloading, this technique can greatly increase your download speed.

I put this to the test by downloading Internet Explorer 8 (16.1MB) using Firefox and Free Download Manager. It took my browser around 47 seconds at an estimated average of 343 KB/s to download the entire file. FDM did it in a whopping 21 seconds, which accounts roughly for an average speed of 767 KB/s. These calculations are not fully accurate, but the difference is clear. Keep in mind however that your mileage may vary depending on your connection and the server you’re downloading from.

Trick 2: using download mirrors
A second trick to speed up your downloads is using mirrors. The idea behind this is that you download a file from multiple sources at once, combining the speed from these servers to get faster downloads. Both FDM and GetRight have a feature for automatic mirror search, but from my experience they don’t find any as soon as you download something that’s not on the list of the top 15 best-known programs.

mirrors.jpg

You can however choose to enter mirrors manually. Whenever your download is bigger than 500MB and the site you’re downloading from offers alternate download links, it doesn’t hurt to enter them. A good example of when you’d want to use this is when you’re downloading Ubuntu‘s install CD.

Copyright © 2013 CyberNetNews.com

CyberNotes: Fill Out Rebate Forms Digitally

This article was written on June 05, 2008 by CyberNet.

CyberNotes
Tutorial Thursday

One of the things that bug me the most when buying something are the accompanying rebates, but sometimes that is the only way to get a good deal. When it comes to online purchases I like to print off the rebates as soon as I make the purchase, but then the laziness kicks in for a few weeks simply because I don’t feel like filling out the form.

Luckily some of the free PDF readers out there offer annotation capabilities, and so you can actually fill out a rebate form on your computer before it’s even printed. Not only will it save you the hassle of having to handwrite the form, but I’m sure it will save the person on the receiving end some trouble trying to read your handwriting. 😉

Here’s what an example form looks like that I filled out:

rebate form-1.png

So how can you do this? We’ve got instructions below that make use of our two favorite (and free) PDF readers. The best part is that both of the apps also have portable versions, which means that you can fill out rebate forms digitally without ever installing a program!

Both of the PDF readers make use of a typewriter tool, which gives you a lot of freedom to type anything anywhere. To use the typewriter tool you just have to click on the document where you want to start typing, and then have at it. If there are any boxes or broken fields that you need to fill in just insert spaces to even it all out, like I did in the example form above for the UPC.

–Foxit Reader (Homepage)–

In Foxit Reader you’ll find what you need at Tools -> Typewriter Tools -> Typewriter. When you click on this for the first time you’ll see a warning saying that an evaluation mark will be placed on the document if it’s saved. Don’t worry, we don’t plan on saving the rebate form. Right after you get done filling out the form just go ahead and print it… there won’t be an evaluation marks as long as you never save it.

foxit typewriter.png

–PDF-XChange Viewer (Homepage)–

In PDF-XChange Viewer just navigate to Tools -> Comment And Markup Tools -> Typewriter Tool to get started. Unlike Foxit you can save the document without any evaluation marks being placed on it, but I’m guessing that once you print the rebate form you won’t need it on your computer anymore. If for some reason you like to save all of your rebate forms then this is probably the better solution for you.

pdf xchange typewriter.png

–Overview–

I’m not 100% convinced that typing out a rebate form is faster than writing it by hand, but it’s definitely a lot easier to read than one that’s handwritten. So maybe it’s better if only to help minimize any mistakes that may prevent you from getting your well-deserved money!

Copyright © 2013 CyberNetNews.com

Firefox 3: Have I Visited this Site Before?

This article was written on April 13, 2008 by CyberNet.

There’s a new feature in Firefox 3 Beta 5 that I just came across yesterday when using the browser, and I’m not sure how long it has been there. What I did was I clicked on the icon for our site which brought up what would normally be security-related information for the page your viewing. Then I clicked the More Information button:

firefox 3 address icon

I was then presented with more details on the security of the site, which includes being able to view cookies or passwords for that particular domain. What I found to be really interesting, however, is that it says whether you’ve visited that particular site before… and how many times you have done so:

firefox visited this site

If you frequently clear out the browser’s history then it obviously won’t be able to keep track of this, but it’s been a month or so since I’ve done that. Needless to say I’ve visited our site quite a bit in that period of time. 😉

Copyright © 2013 CyberNetNews.com