If you have a Jawbone headset and MyTALK account, you may have received an email from the outfit warning that you’ll need to reset your password due to a security compromise in a “limited” number of accounts. The company said it halted the hack after “several hours,” however, and that thieves only stole names, email addresses and encrypted passwords — but no other user information, so far as it can tell. If affected, you’ll need to reset your password by following the instructions (in the PR after the break), and Jawbone also advised you to change it on other sites too, if used elsewhere — never a good practice, incidentally.
The FCC took significant steps to cut the waste from its Lifeline phone subsidy program at the start of last year. However, it might not have gone far enough, if an FCC review of the program prompted by the Wall Street Journal is an indicator. Among the top five providers receiving money for telecom service to the poor in 2012, 41 percent of their customers either couldn’t or didn’t prove they were eligible. The lack of answers leaves a real possibility that some of the $2.2 billion spent on Lifeline in 2012 might have gone to those who didn’t need it. In response, the FCC is keen to claim that its reforms may have saved $214 million last year, but it isn’t happy that there may still have been money going down the tubes — it’s investigating the accusations and could levy fines of up to $1.5 million per violation. While only Verizon has gone on the record and says it’s been dropping customers who wouldn’t prove their eligibility, it’s likely we’ll know more about the potential excesses in the near future.
Fitbit promised wireless syncing and, as of today, it’s finally delivered. An Android-only app update, currently live in Google Play, will now allow Galaxy S III and Galaxy Note II users to transfer data wirelessly from their Zip or One Activity Trackers to the Fitbit application. The new feature, which works over Bluetooth 4.0, was previously announced at this past CES alongside news of the Flex band, and initially targeted for an end-of-January release. But that’s not all this update heralds — it also packs the ability to manage silent alarms, adds push notifications, a distance tile and additional tap-to-pair NFC functionality for use with the Flex. Unfortunately, you’ll still have to wait a bit for that lifestyle band to launch, as Fitbit’s only committed to a vague spring launch. For now, though, a small segment of existing users can enjoy this enhanced feature set.
Fitbit, one of the more popular fitness tracking platforms, has updated its Android app with a couple of new features that users will definitely want to take advantage of. The new app now supports Bluetooth 4.0, for which wireless syncing capabilities are now possible. It’s a feature that’s still in beta mode, however, and only supports a handful of devices so far, specifically only the Samsung Galaxy S III and Galaxy Note II.
To get wireless syncing up and running, all you need to do is tick the “Background Sync” option in Settings. From there, you’ll no longer need your computer to sync, which is something that many developers are moving towards as we slowly transition to being a post-PC world. The improved Bluetooth support is also said to cut down on battery life a bit, something that is certainly always welcome.
Aside from the wireless syncing, the update also comes with push notifications, as well as a new distance meter on the dashboard. You now also have the ability to create and edit silent alarms. It seems like the update is a good one for Fitbit users, but again, you’ll have to have a Galaxy S III or Note II in order to update.
As for other Android device owners, we’re not sure when Fitbit will begin to support more devices with this new update, but they say that further compatibility will be “available shortly.” In the meantime, Start saying goodbye to the old ways of syncing, because soon you won’t need your computer for it any longer.
Streaming music specialist Sonos has been hinting at home theater expansion for years now, but it’s taken until today for the fruits of that ambition to arrive: the Sonos PLAYBAR, aiming for a spot under your TV. Promising the traditional Sonos ease of setup and use, but with a dual-personality catering both for TV and movie audio, and for music, the PLAYBAR hooks up as another zone in your home entertainment network and packs nine speakers as well as playing nicely with other PLAY models. We caught up with Sonos to find out why the PLAYBAR was special.
The company’s reluctance to extend itself beyond musical speakers has been down to a fear of losing focus: the audience is still dedicated music lovers, Sonos says, but concedes that many in that audience also love films. Meanwhile, while display technology has advanced hugely, skinny flat-panel TV sets have squeezed speakers into something of an afterthought, thus opening the door to hardware like the PLAYBAR.
All-in-one speakers aren’t new, of course, but PLAYBAR does some things differently. That starts with setup: there’s wireless onboard, for the easiest way of connecting, but you also get a pair of ethernet ports on the back for wired networks (and for passing the connection through, say, to your smart TV, or being the first node hard-wired to your router for an overall Sonos installation). Otherwise there’s just power and an optical digital input – no HDMI, since Sonos expects the TV to remain the “brains” in charge of switching and managing media – along with the usual three physical buttons for mute and volume up/down which are on one end of the bar.
When you first set up, the PLAYBAR can learn the volume buttons on your favorite remote (whether that be for your TV, your Blu-ray player, or your set-top box). Out of the box there’s presets for the popular brands/models – most users will just have to press the volume-up key for the PLAYBAR to recognize it – but there’s also a nine-key-press learning mode for new sets. Cleverly, Sonos collects up those programming settings and updates them across all PLAYBAR units, meaning the next user with the same remote won’t have to go through the teaching process. On the back of the soundbar there’s a broad IR repeater strip, just in case placing the PLAYBAR in front of your TV blocks its IR receiver, and there are two IR windows on the Sonos itself, catering for table or wall mounting.
Back when the PLAYBAR was first spotted sneaking through the FCC, there was speculation as to what its dual wireless chipsets might be used for. As the company explained to us, it’s all down to latency – or the avoidance of it – in surround sound mode. The PLAYBAR has one regular WiFi chip to hook up to the network as per all Sonos speakers, but also has a second, ultra-low-latency chip which is used to maintain up to three perfectly-synchronized channels in a surround setup, feeding two PLAY:3 rear speakers and a SUB subwoofer.
As for the speakers inside the PLAYBAR itself, there are six mid-woofers and three tweeters, the latter spread across the outer edges and one in the middle. At normal volumes, the woofers are synchronized, but they can automatically shift out of phase if required – complete with some clever DSP – to avoid distortion when you crank up the audio. Sonos has also equipped the PLAYBAR with completely different settings for music and movies (in fact they automatically change depending on physical orientation, too).
Most importantly, in either mode, it sounds great. Music has a surprising degree of precision, with vocals coming through clearly in the center while the rest of the soundstage has a spread that belies the placing of the speakers. Movies, meanwhile, go even further: the virtual surround you get with the PLAYBAR alone is impressively effective, and the bass has some decent thump to it (given the limitations of the 36 x 5.5 x 3.4 inch footprint and the speakers Sonos has been able to fit), but group it up with a couple of PLAY:3 rear channels and the SUB, and it’s both incredibly loud and precise.
Sonos PLAYBAR overvew video:
Control, as you’d expect, is via Sonos’ existing PC, Mac, iOS, and Android apps: the PLAYBAR shows up as a regular zone, which means you can group it up for party music. However, there’s a little extra consideration for the TV focus there too; if you try to add the PLAYBAR to a group, it’ll double-check to make entirely sure you want to do that, and if you start playback on your TV, the soundbar will automatically switch to whatever is coming through its optical input. You can, though, manually change the audio while leaving the screen on, handy if you want to show a photo slideshow with music from, say Spotify.
The Sonos PLAYBAR will go on sale on March 5, priced at $699 in the US, £599 in the UK, and €699 in Europe.
Welcome to the BCM21892. It may sound like every other piece of Broadcom silicon we’ve covered, but it actually represents an important move from a company that is eager to start pecking at Qualcomm’s lunch. First and foremost, this is a 4G modem for flagship phones rather than any budget fare, with support for LTE-Advanced and data speeds of up to 150Mb/s. To deliver that kind of performance, carriers either need 20MHz of contiguous bandwidth — a rarity these days — or they need carrier aggregation technology, which allows a modem to exploit separate chunks of bandwidth simultaneously. The BCM21892 boasts that spec too, not to mention compatibility with most of the popular network standards in use around the world, from the TD and FD types of LTE right down to HSPA+, TD-SCDMA and EDGE/GSM. Finally, through a combination of small transistors (28nm) and clever algorithms, the chip is claimed to reduce power consumption by 25 percent compared to rival devices, and also to take up less space — potentially leaving more room for other goodies (Broadcom suggests NFC). The chip is still only at the the sampling stage, however, so the folks at Qualcomm shouldn’t have too much to worry about until at least 2014.
Here you are Princeton latest goodies, the Toaster PRO or the PTW-TSTP. Set for a February 22nd launch in Japan at at 7,980 Yen the PTW-TSTP is an SD/SDHC and SDXC Card reader that comes with an USB port for USB Memory Stick as well as an Ethernet port and Wifi! Yep I am sure that you have now figured it you, yes the PTW-TSTP thanks to its 1,250mAh internal battery will let you access and share to anyone Wirelessly your memory card or USB stick from a mobile device on the go or at home! A …
I am sure that pretty much anyone you may own an amazing Audio System at home that lack any Wireless capabilities. Unfortunately there are not many solution on the market that will not cost you an arm or a leg. However today Princeton came with a nice little solution with the PTM-BTR1. There isn’t anything fancy about this little Black box and we could even reproach Princeton’s choice when it comes to the lack of optical out on these PTM-BTR1, But at 2,980 Yen the PTM-BTR1 being …
It’s been a long time since we didn’t see anything remotely interesting from Princeton Japan, but today they introduced not one but three new product worth of interest with first the JUICEBOX PSP-BTS2. the JUICEBOX PSP-BTS2, available in three different colors, comes with a 2x3W output and 50mm driver units, but the most interesting part here is that the JUICEBOX PSP-BTS2 will stream wirelessly your tunes via a Bluetooth connection (Bluetooth 2.1+EDR) or NFC! If you do not own any …
Rogers has had an unlocking policy in place for awhile, but it isn’t what most would call reasonable: an unlock isn’t even an option until the contract is over, which could involve a 3-year wait and obsolete hardware that isn’t worth the effort. Logic is about to prevail, thanks in part to pressure from proposed CRTC guidelines on customer rights. A policy change in March will see Rogers unlock devices as long as they’ve been on the network for at least 90 days, delivering freedom while the equipment is still relevant. Subscribers will just have to swallow the $50 fee, although that’s a relative bargain next to buying outright.
The provider is also making a gesture of goodwill to those who frequently cross into the US through a new roaming add-on launching this spring. Border-hoppers will have the option to pay $8 to get a quick, 50MB hit of data for one day. It’s not quite the revolution the carrier claims when many of us could blow past the limit within minutes — Instagram, anyone? Still, it’s good enough for emergency directions or an email check among those of us who won’t commit to a permanent roaming plan.
This is site is run by Sascha Endlicher, M.A., during ungodly late night hours. Wanna know more about him? Connect via Social Media by jumping to about.me/sascha.endlicher.
