Hasta La Gadget!

Sure, you can run Linux on robots and on desktops and, apparently, on small cats, and we’ve also seen it on plenty of tablets before, but this one is a little different. Max Lee over at Galaxy Tab Hacks created the video below to demonstrate a Samsung Galaxy Tab 10.1 running Ubunbu, but doing it on top of Android such that the tablet’s native OS is running Linux in the background and then using a VM client to launch the UI. In other words: it’s running both operating systems at once, and despite that we think the results are quite usable, even loading up this very website with aplomb. It’s demonstrated after the break and if after watching you just gotta get a piece of that the full instructions are on the other end of the source link below.

Continue reading Ubuntu demonstrated running on Galaxy Tab 10.1, summarily dubbed ‘Tabuntu’ (video)

Ubuntu demonstrated running on Galaxy Tab 10.1, summarily dubbed ‘Tabuntu’ (video) originally appeared on Engadget on Wed, 29 Jun 2011 08:35:00 EDT. Please see our terms for use of feeds.

Permalink   |  Galaxy Tab Hacks  | Email this | Comments

Ever wondered how just one message in an average Chatroulette session finds its way to whatever destination fate may deem suitable? Sure you have. As it stands, every single pulse from your Ethernet socket starts its initial journey by hunting for an optimal connection path; in some cases, that involves routing through massive ring networks crossing over untold miles of fiber optic cabling. Using traditional techniques, nailing down an optimal solution for a ring can take eons (or days, whichever you prefer), but there’s a new methodology coming out of NC State‘s den that could enable the same type of scenario to reach its natural conclusion 10,000 times faster. Dr. George Rouskas, a computer science professor and proud Wolfpacker, has just published a new paper describing the scheme, with the focal point being a “mathematical model that identifies the exact optimal routes and wavelengths for ring network designers.” More technobabble surrounding the discovery can be found in the source link below, but unfortunately, there’s no telling how long it’ll take your impending click to be addressed using conventional means. Here’s to the future, eh?

NC State discovery finds optimal connections 10,000 times more quickly, ResNet admins do a double take originally appeared on Engadget on Wed, 29 Jun 2011 08:11:00 EDT. Please see our terms for use of feeds.

Permalink   |  NC State University  | Email this | Comments

The company is offering the $50 rebate through July 31 on the purchase of its 32GB TouchPad. However, the company rebate is only available to those who own one of its smartphones.

Originally posted at The Digital Home

Did our footage of OCZ’s new RevoDrive 3 X2 whet your appetite for more info on the super speedy SSD? Well, your wish is the web’s command, and we’ve got a full roundup of reviews that’ll tell you all you need to know. After putting OCZ’s latest through its paces, the consensus is that the SSD is seriously quick in remembering and retrieving data. According to Tom’s Hardware, the RevoDrive 3 X2 — with its max 1.5GBps read and 1.2GBps write speeds — “smokes everything” they’ve had pass through their lab. However, AnandTech noted that such capacious bandwidth is “simply overkill” for most users, as the drive only really flexes its muscles once the queue depth increases from enterprise-level workloads. Several sites noted that the lack of TRIM support on Windows machines was also a concern, and that more cost effective (albeit slower) storage solutions can be had with a DIY RAID array of SATA SSDs. Of course, you don’t have to take our word for it, get down to the nitty gritty in the links below.

Read – Hot Hardware
Read – AnandTech
Read – Tom’s Hardware
Read – PC Perspective
Read – The SSD Review

OCZ’s RevoDrive 3 X2 review roundup: SSD melts faces with 1.5GBps read and 1.2GBps write speeds originally appeared on Engadget on Wed, 29 Jun 2011 07:41:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Triggertrap is an open source, Arduino-based box that will take pretty much any input and use it to trigger your camera. Lasers, a clap of the hands, even your old TV remote — all of them will work to trip your camera’s shutter.

The project differs from other Kickstarter projects in a few ways. First is that there will be two very different versions. Photographer and geek Haje Jan Kamps has already built an Arduino-based laser trigger for a camera (break the beam, take the shot) and he will be selling a more complex kit with various inputs for DIY-loving photography hackers.

The second product will be a smaller, more polished box designed to be sold — eventually — in camera stores. This will contain a laser trigger and other inputs, along with variable time-lapse controls. It will still be hacker friendly thanks to a USB port through which it can be programmed.

The idea is that if you can connect it to an Arduino board, you can use it to fire you camera. This means that you will only be limited by your ideas.

To get in on the Kickstarter action, you’ll need to pledge $75 to get an assembled, Arduino-based model (Haje says prices will rise in the future). If that’s a little rich for you DIY types, you can download the open-source plans and build your own.

Triggertrap: The Universal Camera Trigger [Kickstarter]

See Also:

• DIY IR SLR Trigger Is Simple, Easy, Cheap
• Camera+ Sneaks Volume-Activated Shutter Past Apple's Censors …
• Cheap DIY Camera Systems Perform Amazing Photographic Feats …
• Downgrade Your Camera With The Gigtube Remote Viewfinder