This DIY Daft Punk helmet is way cooler than your DIY Daft Punk helmet (video)

Harrison Krix may never actually be invited to join Daft Punk, but at the very least, he’ll likely have the coolest Halloween costume in the room for pretty much the rest of his life. It’s true, we’ve seen plenty of folks have a go at the French electronic duo’s signature headware in the past — including one from Krix himself — but few if any have shown quite the attention to detail as this project from the Atlanta-based graphic designer. At the center of the project is an Arduino-controlled LED with text that can be changed over WiFi with an iOS device. Relive the four month project in the three and a half minute video after the jump. And if you’ve ever wondered what Back to the Future might have looked like with Thomas Bangalter as Marty McFly, check out the source link below.

Continue reading This DIY Daft Punk helmet is way cooler than your DIY Daft Punk helmet (video)

This DIY Daft Punk helmet is way cooler than your DIY Daft Punk helmet (video) originally appeared on Engadget on Mon, 19 Sep 2011 20:02:00 EDT. Please see our terms for use of feeds.

Permalink DVICE  |  sourceVolpin Props  | Email this | Comments

ARM-ed to the Teeth, Arduino Hardware Grows Up

The Arduino Due features an ARM-based microprocessor. Image: Adafruit

Makers and motherboard-modders rejoice! One of the most popular open-source computing hardware companies recently debuted new hardware offerings for gadget geeks, including a beefier project board that will allow makers and hobbyists to create more complicated embedded computing projects.

Arduino announced three new products at Maker Faire NYC this weekend: The Arduino Due, which features a souped up ARM-based microcontroller, the Arduino Leonardo and the self-explanatory Arduino Wi-Fi.

Straight from the company of the same name, an Arduino is an open-source prototyping board that houses a single microcontroller (basically a programmable CPU) and allows for input-output with a number of ports, so you can connect a variety of sensors, LEDs, wires and whatever else you want to your project. The Arduino platform has been a favorite of the DIY community since it’s inception in 2005, and until now, all other models have been 8-bit.

The new Arduino Due sports a considerably beefier set of stats, incorporating a 32-bit ARM-based microcontroller that can run up to 96 MHz. For comparison, standard Arduinos normally have an 8-bit, 16 MHz processor. It has 256 KB of flash memory and 50 KB of RAM (SRAM, to be precise). This more advanced processor should allow hackers and DIYers to create more advanced projects than have been possible with Arduinos in the past.

Or as Wired’s editor in chief Chris Anderson put it to us: “Basically, Arduino just grew up.”

“It’s more than just 32-bit power,” says Anderson, who founded maker site DIYDrones. “It’s also debugging, a real-time operating system, native USB,” and a host of other mod-friendly attributes that appeal to the tinkering crowd.

The Arduino Due isn’t the first of its kind to include an ARM-based processor (which are used in a number of smartphones and mobile devices). The Beagleboard beat Arduino to the punch, but a higher price, smaller community and a relatively more complicated nature kept the Beagleboard from getting big.

But a more complicated product, like the Due, means that developing for it will also get a bit more tricky. The Arduino Due platform won’t be quite as beginner-friendly as the company’s other boards, so Arduino has taken measures to ensure that it doesn’t end up in novice hands, at least initially.

The Arduino site — along with DIY destinations like Instructables, Hackaday and Wired.com’s How-To Wiki — offer a wealth of project ideas, step by step instructions and sample code for those who want to get into the Arduino scene.

The Due will first roll out to developers, rather than immediately being released to the community at large. The company plans a final, tested release by the end of 2011.

The Arduino Leonardo should be available late October for a pocket-friendly $20. The Arduino Wi-Fi will also be available in October.


Chips, code, and gears: Maker Faire 2011 gallery

The Maker Faire made its way to NYC this weekend and Geek.com was in attendance. Below you can see a full gallery of the show and all the awesomeness that was in store for attendees, from the NY Hall of Science’s giant rockets, to upcoming Arduino models, to a flame-breather dragon made of scrap metal, […]

Arduino-modded stoplight makes the bestest server monitor you’ll see this week

Keeping an eye on your server health isn’t the most romantic of pastimes. That’s what compelled modder mkanoap to build a computer-free monitoring system that was as cheerily simple as Xymon’s red-yellow-green symbols. His solution? Install an ethernet-enabled Arduino into a stoplight and mount it on the wall of the office. On one hand, the cubicle creativity factor just has to be commended, but on the other, we’re guessing it’s not an entirely selfless endeavor — it’s not exactly enthralling answering those system status calls, you know? Anyone who wants to follow in his footsteps can click our source link, which includes details of where to acquire a stoplight without a stealthy, nighttime, screwdriver-assisted jaunt to your nearest intersection.

Arduino-modded stoplight makes the bestest server monitor you’ll see this week originally appeared on Engadget on Mon, 19 Sep 2011 11:21:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceInstructables  | Email this | Comments

Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold

Arduino at Maker Faire

When Arduino unveiled a boatload of new products on Friday, we could have taken the easy route, posted the PR and called it a day. But, since the crew happened to be in town for Maker Faire, with a few folks from Atmel (makers of the AVR chip at the heart of the open source MCU) in tow, we figured why not go straight to the source. Arduino founder Massimo Banzi gave us a look at the company’s latest offerings: the ARM-powered Arduino Due, the low-cost Arduino Leonardo, and aptly-named Arduino WiFi, as well as a peek at some of the group’s upcoming plans. Keep on reading after the break for the juicy details.

Continue reading Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold

Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold originally appeared on Engadget on Mon, 19 Sep 2011 09:45:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

‘Arduino: The Comic’ will teach you to stop worrying and love programming

Ever wanted to learn DIY programming on the Arduino, but aren’t interested in trawling through stacks of dusty technical manuals? Then pay attention: artist Jody Culkin has produced a paneled primer that explains electrical engineering from Ohms all the way through to building your own dimmer switch. Friendly, informative and most importantly, brief, by the time you’ve finished it, you’ll be dashing down to IKEA to build your own Luxo Jr.

‘Arduino: The Comic’ will teach you to stop worrying and love programming originally appeared on Engadget on Fri, 16 Sep 2011 15:41:00 EDT. Please see our terms for use of feeds.

Permalink ExtremeTech  |  sourceArduino! The Comic (PDF)  | Email this | Comments

Insert Coin: Teagueduino solderless electronic board

In Insert Coin, we look at an exciting new tech project that requires funding before it can hit production. If you’d like to pitch a project, please send us a tip with “Insert Coin” as the subject line.


We’ve seen the Arduino platform used to do some very, very cool things. You can pick up one of these incredibly versatile contraptions for well under 100 bucks, putting it within reach of the entire gamut of advanced hardware developers. But as simple as it may be to use for the technically inclined, there’s still quite a bit of programming required, and you’ll probably need to know your way around a soldering iron as well. The Teagueduino sets out to simplify the process, replacing intimidating code with simple drop-down menus, which you can adjust in realtime, giving you instant feedback as you make adjustments to your ‘coding’ handiwork. The second piece of the puzzle is the Teagueduino board itself, which includes snap-enabled inputs and outputs (yes, that means you can leave the finger-melting soldering iron to the pros).

The hardware/software duo first made an appearance this spring, but it just popped up on Kickstarter, which means the Teagueduino could be making its way to a DIY project near you in the not-so-distant future. Unfortunately it’s not cheap — you’ll need to pledge $160 to get a fully assembled kit, while $260 adds extra I/O terminals. The Teagueduino is nearing the halfway point of its $22,000 funding goal with 27 days left to go, and if all goes according to plan, you should have your kit by November. Jump past the break for an overview with the designers.

Continue reading Insert Coin: Teagueduino solderless electronic board

Insert Coin: Teagueduino solderless electronic board originally appeared on Engadget on Sat, 10 Sep 2011 12:00:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceKickstarter  | Email this | Comments

Arduino hack imitates Pixar’s living lamp, disses IKEA in the process (video)

Oh, look — it’s Pixar’s iconic lamp brought to real-world Frankenlife. Okay, not really, but the automated, voice-enabled mod is as close to the movie studio’s icon as a hacking kit and five euros in a Swedish furniture store can get you. The prototype, lovingly named “The annoying IKEA lamp” or SM-1, is ArduinoArts’ finalist entry for SeeedStudio’s Grove Toy Kit contest. Headed by industrial engineer Javier Lander, the project weds two servos (one in the base and one in the lamp), sensors for motion and sound, a three axis accelerometer, LED light and audio board to an Arduino shield, springing the modjob to programmed states of alarm and irritation. We commend Javier for eschewing the cutesy road well-traveled, and giving the mundane desktop light a grumpy, old man makeover. Click on past the break to see this curmudgeonly office accessory in action.

[Thanks, Javier]

Continue reading Arduino hack imitates Pixar’s living lamp, disses IKEA in the process (video)

Arduino hack imitates Pixar’s living lamp, disses IKEA in the process (video) originally appeared on Engadget on Wed, 07 Sep 2011 21:13:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceArduinoArts  | Email this | Comments

Real life Minecraft block combines cardboard box, Arduino, and a projector (video)

Real life Minecraft block

You know how when you were a kid, the box something came in was almost as fun as the toy itself? Well, that doesn’t have to change as you get older — provided you’ve retained that creative spark. Ben Purdy apparently kept his imagination nimble and, with the help of a projector, a piezo element and an Arduino (of course), turned a plain ol’ box into a real life Minecraft block. Hit the cube with a stick, or anything really, and the projection-mapped image starts to deteriorate and particles tumble off as you mine it. You won’t actually be able to turn your harvested materials into structures or tools, but it’s still a good idea to keep an eye out for Creepers. Don’t miss the trio of videos after the break.

Continue reading Real life Minecraft block combines cardboard box, Arduino, and a projector (video)

Real life Minecraft block combines cardboard box, Arduino, and a projector (video) originally appeared on Engadget on Mon, 29 Aug 2011 15:41:00 EDT. Please see our terms for use of feeds.

Permalink Kotaku  |  sourceBen Purdy  | Email this | Comments

Ben Heck tackles Android ADK, whips up car trip-simulating baby seat

Ben Heck car seat simulator ADK

We’ve been wondering what would happen if the infinitely resourceful Ben Heck got his hands on the powerful Android ADK. Thankfully, in the most recent episode of the accomplished modder’s show, our curiosity is satiated. The crafty Wisconsinite tackles a reader request — to recreate the soothing motion of a car ride and help put a three-month-old baby to sleep. Mr. Heck uses the accelerometer in his phone to record the bounce and sway from the backseat as he drives around. He then draws up some code that will feed that data to the Arduino-powered ADK and move a series of servos that will tilt and shake a child’s car seat. Sadly, the completion of the project will have to wait till the next exciting episode, but by the end of the installment embedded after the break you do get to see a scale model. What are you waiting for? Click that little read more link for PR and video… you know you want to.

Continue reading Ben Heck tackles Android ADK, whips up car trip-simulating baby seat

Ben Heck tackles Android ADK, whips up car trip-simulating baby seat originally appeared on Engadget on Mon, 22 Aug 2011 23:05:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments