This year has seen it’s fair share of Apple iPhone 5S and “budget” iPhone tips and rumors, and as it always seems to go, close to a release, case-makers are ramping up efforts to make their accessories hit the market first. Even though the next-generation iPhone (or iPhones) are not yet confirmed by Apple as
Just after first hearing about Nyko’s accessory contributions to NVIDIA SHIELD earlier today, we’ve gotten the opportunity check theses accessories out first hand at E3 2013! Here we’re seeing both the Nyko NVIDIA SHIELD Travel Case and the Nyko NVIDIA SHIELD Shell Case in action, complete with a production-level SHIELD device inside. Look friendly enough
The nightly recharge is a fact of life with most modern smartphones, and the HTC One is no different, but what if you could double your runtime and protect your expensive new toy in the process? That’s what Mophie promises from the Juice Pack for the HTC One, a combination external battery and hard case that, when wrapped around your phone, should let even the most ambitious power-user escape the tyranny of the charger. All that flexibility comes at a price, however: $99.95 and a considerably larger device in your pocket. Is the Mophie Juice Pack worth the compromise? Read on for our full review.
Hardware
Mophie has been making battery-cases for smartphones for years now, focusing on the iPhone and iPod touch; its line-up for Android phones is a lot smaller, with device-specific models only for the HTC One and the Samsung Galaxy S III (though the company offers generic portable batteries, too). The concept is straightforward, being a hard case that’s enlarged to accommodate a rechargeable power pack, that can be used to top up the internal battery in your phone.
For the HTC One, that means a 2.88 x 6.06 x 0.67 inch soft-touch plastic sled which adds 3.12 ounces to the weight of the phone (to compare, the One alone is 2.69 x 5.41 x 0.37 inches and 5.05 ounces). Black and silver versions will eventually be offered, to match the two finishes of the One itself, though only the black Juice Pack was available in time for our review.
More on the HTC One in our full review
Inside, there’s a 2,500 mAh battery, 200 mAh larger than the One’s own battery, charged from a standard microUSB port on the bottom of the case. That simultaneously charges the One, too, thanks to a pass-through microUSB connection which is plugged in when you slide the phone inside. It’s a snug fit, involving pulling off the Mophie’s top cap, slotting the One into the groove, and gently pushing it all the way into place; once the case is closed up again, there’s no wiggle or movement.
Although the sides and rear of the One are covered up, you still get access to all the ports and buttons. Pass-through controls for the power/standby key on top and the volume keys on the side are included – slightly oversized, which works well with gloved fingers, and the power button is IR-transparent so you can use the HTC TV remote control app still – and there’s a hole for the headphone socket too. The cut-out is big enough for most jacks, though if you’re using a set of headphones with an oversized plug, you might find the case gets in the way.
On the back, there’s a big cut-out for the UltraPixel camera and LED flash, along with a hole for the rear microphone. Flanking the microUSB port on the bottom edge are four connectors for a docking station (which we didn’t have to test). The only controls are a button to show battery status – using a row of four white LEDs – on the lower back of the Mophie, with a switch to turn on or off the flow of juice.
Usability and Performance
Make no mistake, once the One is in the Juice Pack you’re left with a big device. It’s almost comically large, in fact: the bowed back panel fills your palm, and while the soft-touch finish is pleasant to touch, the Juice Pack does make the One feel somewhat like the digital signature gadgets couriers tend to carry. If you’re in the habit of dropping your phone in your front jeans pocket, or your inside jacket pocket, you’ll immediately notice the difference.
It also feels like Mophie missed an opportunity to build some extra functionality into that expanse of plastic. HTC’s BoomSound speakers are usefully left exposed, for instance, and so a kickstand would have been an neat addition to prop the One up for hands-free video use.
Still, the Juice Pack certainly does what it promises to. Mophie recommends waiting until your One is at around 20-percent, and then flicking the switch to take the phone back up to around 80-percent; it takes more power to recharge a completely flat battery, or to top-up a battery until it’s entirely full. In our testing the Juice Pack took roughly around the same amount of time to recharge the One as the HTC adapter would.
In theory, you should be able to get a full recharge out of a single blast of the Juice Pack. In practice, following Mophie’s guidelines means it’s more like you’re doing a couple of periodic top-ups rather than going from zero to full. Still, with judicious control of the power switch and typical use of the One, we saw runtimes just short of the Mophie’s maximum 100-percent improvement.
Value
At $99.95, the Juice Pack isn’t the cheapest case or the cheapest external battery. If protection is what you’re after, there are far more form-fitting soft or hard cases on the market, priced from around $10; HTC’s own Double Dip Hard Shell for the One is $24.99, for instance.
Meanwhile, if you’re willing to sacrifice the integration, there are portable batteries with far more capacity than the Juice Pack provides. HTC offers the External Battery Bank (BB G600), for instance, a $50 block roughly akin to an oversized Zippo, and which – with 6,000 mAh to play with – could recharge your One twice before it needed topping up itself.
Then there’s the lifespan of the Juice Pack itself. Mophie rates the case for “over 500 full cycles” of 0-percent to 100-percent, after which point the battery inside “may provide less than 75-percent of the original capacity.” To be fair, that’s par for the course for any Li-Poly rechargeable battery, but it could mean that one day you’re carrying a heavy case that doesn’t really deliver in terms of a lasting charge. Whether that comes before the average two-year agreement is up, and you’re already thinking of getting a new phone, will depend on how much you use it.
Wrap-Up
There are cheaper ways to protect and charge your phone. A separate case and external battery will generally provide more runtime and a more easily pocketed handset. On the flip side, the best portable battery is the one you have on you when you’re running low on power, and the converged solution Mophie offers scores highly on that measure.
For some, the extra bulk the Juice Pack adds will be a deal-breaker. Certainly, it makes the One a big device, but if you’re a power-user the promise of up to double the runtime is a huge advantage, and we can’t really fault Mophie’s design for accommodating the One’s controls and features.
Mophie Juice Pack for HTC One Review is written by Chris Davies & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.
The accessory company RokForm has been releasing accessories since 2010, coming up here in 2013 with a family of components that allow a smartphone – one of several models – to be attached to essentially any hard surface you’ve got near you. Though the group continues to keep the use cases for their accessories wide open, we’d like to suggest one that’s proven itself to be pretty neat right here at home: dish washing.
Of course RokForm accessories aren’t made for washing dishes, they’re made for holding and protecting your smartphone. But what we’ve got here in a combination of elements is a way to hold, in this case, a Samsung Galaxy S III aloft above a sink full of dirty dishes playing Netflix while we go about our business. So we’ve got Beavis and Butthead playing on loop while the cups and pans are run through the hands-on action.
With the RokForm v3 Suction Mount we’ve got one piece of the puzzle, and with the Rokbed v3 S3 Case we’ve got the other. RokForm is expanding their line of compatible components with this v3 set, working with devices like the iPhone 5 and the iPhone 4S right this minute with plans for devices like the GALAXY S 4 on the list. In addition to the Suction Mount, there’s also a friendly list of components that attach with the same multi-clip attachment point you see here.
You’ll be able to attach with a Bike Mount, an Extended Tripod Adapter, Sport Clip, and magnets – amongst others coming up, too. With the Rokbed v3 S3 Case on its own, you’ve got an injection molded polycarbonate frame, “thermoplastic elastomer non-slip grip insert”, a magnet kit, a Rokguard screen protector, and a Remote Mounting System for moist mount – these are basically heavy-duty sticker-backed units that lock in to the back of the case like the Suction Mount does.
So you’ve got the case – you’ll buy that for right around $40 or $45 USD depending on the device you’re working with. Then you’ll want the Suction Mount which will run you another $49 USD. This mount, like the case, is heavy duty. Made with polycarbonate and die cast zinc construction with two angles for movement – 360 degrees of rotation as well as a 210 degree tilt. All we need is one, the one which allows the phone to sit horizontal for superior television show viewing.
This mount has sat attached to a tile above the sink for over a week straight with no end in sight. Of course that’ll happen when you’ve got a 3.4-inch suction cup holding up a device that’s much, much lighter than its full weight capacity. Sound like a winning combination to you? Let us know!
RokForm v3 accessories turn smartphones to wall-mounted televisions is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.
Thermaltake receives prestigious “COMPUTEX d&i Awards 2013” for the 6th time!
Posted in: Today's ChiliTaipei, Taiwan – May 2, 2013 – World famous “COMPUTEX d&i award 2013” recently announced the recipients this year, ever since “COMPUTEX d&i awards” established, Thermaltake receives this honor every year since the d&i award started in 6 years ago! Standing out among 254 works from 7 countries this year, the jury comprising some of the world’s leading design experts crowned the one-off Thermaltake Urban S41 mid-tower Chassis and Tt eSPORTS CRONOS Gaming Headset as winners! Both products reached the high specifications of the iF design award, including the Degree of innovation, Design quality, Finish, Ergonomics, Environmental impact, Brand value & branding, total of 11 criteria. With the ultimate productivity to fulfill users’ different needs, Thermaltake managed to show its leadership in the entertainment and technology industry.
Thermaltake Urban S41 mid-tower Chassis-Simple yet Elegant
Urban S41, one of the latest chassis Thermaltake recently launched, has a minimalistic appearance design concept by using a large aluminum metal brushed door front panel, unified top panel and heighten footstands to keep the appearance simple and elegant. With the aid of internal silent foams will guarantee the system has a near silent operation. Further, it has equipped with four USB ports including two USB 3.0 ports, HDD docking station, innovative tool-less drive bays, excessive fans and retained with grommet holes ready to support liquid cooling system and advanced cable management. It has definitely prepared Urban S41 to take on various powerful hardware components with ease and style.
Tt eSPORTS CRONOS Gaming Headset
CRONOS presents strong gaming style with its vivid red and black color, the Battle Dragon LED lighting on the earmuff adds more gaming element. The LYCRA® head-pad design reduces the pressure on head with Hi-performance frequency response. Bendable and pivotable microphone boom to increase the sound quality and Microphone mute switch for controlling on the fly with 3.5mm gold-plated plug for smooth the signal and data transmission. An optimal gaming experience via USB plug and Black and Red cross braid cable for durable use and stylish which is focus on target group of Casual and competitive gaming enthusiasts.
If you picked up an HTC One and found that its battery isn’t quite cutting it, Mophie may have a solution for your dilemma. The accessory maker is now offering its popular extended battery line for HTC’s crown jewel. In addition to its slim protective casing, the freshly minted Juice Pack keeps the party going with an embedded 2,500mAh backup cell. Mophie claims that its added pick me up can increase the One’s battery life by two-fold, placing its performance on a par with the marathon-ready RAZR MAXX HD. Available in two colors to match whichever hue you’re sporting, the $100 Juice Pack is a surprisingly attractive backup plan for HTC’s aluminum marvel.
Filed under: Cellphones, Mobile, HTC
Source: Mophie
“Shibaful is the world’s first iPhone case modeled after a grassy park. This case is based on Yoyogi Park in Tokyo, and it’s the first in our World Parks series. For the next versions, we’re considering basing the grass on New York’s Central Park and London’s Hyde Park.”
“Regarding the technology, the case is made using electrostatic flocking. When the five different colored fiber particles are dropped from above, they form this kind of texture. There are all kinds of iPhone cases, but we think this is the first with a grassy texture. Also, it feels different when you stroke it and when you grip it. The green color is really fresh, and easy on the eyes, too. Another part of the concept is that you’ll sometimes want to turn your iPhone over, and rest your eyes by looking at the green.”
“The studio we work from, called co-lab Shibuya Atelier, is a shared office. We have shared access to 3D printers, laser cutters, and digital machines, so we can turn PC data into tangible objects. Here, we can try all kinds of ideas quickly and cheaply, taking those ideas closer to commercial production. In Japan, there are lots of small businesses with all sorts of technologies. We’ve produced this iPhone case to express our goal of creating new, exciting things, by combining small businesses’ technology with our ideas and prototyping abilities.”
“When we market this, we’ll initially do a limited run of 100. They’ll be available from the end of April, at eight stores throughout Japan. The price will be 3,980 yen. Meanwhile, we’re gearing up for mass production to meet future needs.”
This Video is provided to you by DigInfo.tv, AkihabaraNews Official Partner.
There are countless ways your phone can come to the rescue in an emergency, from first aid apps, to just being able to dial 911 on the spot. But if you’re being attacked or pursued, you don’t have time to fumble through a touchscreen UI. You need to signal for help immediately, which is easy to do with this iPhone 5 whistle case. More »
Excite Japan – “Oppai-Cover” – Protect your iPhone with two soft, squeezable bumpers
Posted in: Today's ChiliExcite Japan today has written a review on a new iPhone case called “Oppai-cover” by Big Mouth Toys that reportedly gives very good protection to iPhones.
It is reported to be smooth with good elasticity and gives a nice bounce to iPhones when dropped.
The reviewer said it feels nice to touch with his hand while he is texting or placing a phone call. But apparently he had some curious stares from others who appeared to want to see what his case felt like.
When you grab a Pelican case for your electronics, you know good and well that you’re trusting your most precious bits of metal, plastic, and glass to the best. What you’ve got available to you today is a couple of iPhone 5 cases that’ll keep you from essentially any kind of damage – toss it down a flight of stairs into a bucket of water if you want! One of these two cases is pretty darn amazing, the other is undeniably top-of-the-line.
With the Pelican ProGear Protector you’ll be working with a shock-deflecting outer shell packed with an elastomeric interior lining. You’ll be protected from scratches as well as basic impact, and you’ll be seeing this device in several color combinations, too! This little monster is available right this minute for MSRP $79.95 from a sweet Pelican retailer near you.
Then we’ve got the boss. Pictured above and below, the Pelican ProGear Vault will protect your iPhone 5 from a drop of 72 inches above the ground. You’ve got both insulating elastomeric shock and impact protection inside, a durable screen cover you can touch through but also offers high-grade anti-scratch technology, and some sweet flush-fitting stainless steel hex-head machine screws to hold it all together. With hex-head screws, you’ll never get in again (without a hex-head screwdriver, included in the package, of course), and you’ll be fashionably fit, too!
The Pelican ProGear Vault is one we’ve seen before – it’s been coming out since CES 2013 and is just now ready for full action! You’ll be able to pick one up now for a cool $79.95 MSRP this week – and make sure you know what you’re getting into – your kids will want to start tossing your phone more than ever! Have a peek at our Pelican ProGear Vault hands-on and hit up the timeline of Pelican products below as well – stay rugged!
Pelican ProGear Vault unleashed: iPhone 5 gains ultra-rugged protection is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.