Crapgadget CES, round three: WheeMe massage robot whips its arms back and forth (video)

Crapgadget CES, round three WheeMe massage robot

Why me?

Continue reading Crapgadget CES, round three: WheeMe massage robot whips its arms back and forth (video)

Comments

Cambridge Consultants Tê, the tea-machine of the future taste test (video)

Cambridge Consultants T, the teamachine of the future taste test video

After water, tea is the world’s favorite beverage, yet to the gadget-producing fraternity, it’s cruelly ignored in favor of coffee machines. Thankfully, the folks at Cambridge Consultants are trying to remedy this with the Tê, a machine that promises to whip up a perfect brew in two minutes. Naturally, as your humble narrator is a milquetoast European correspondent, we were compelled to see if it could live up to its impressive claims. Grab a Chocolate HobNob and join us after the break.

Gallery: Tˆ Machine

Continue reading Cambridge Consultants Tê, the tea-machine of the future taste test (video)

Filed under:

Comments

Revolve Robotics’ KUBI spins your tablet around for teleconferences, we go hands-on

Revolve Robotics' KUBI spins your tablet around for teleconferences, we go handson

We’ve been covering telepresence robots for years, but those that have materialized aren’t exactly within most people’s budget. However, if all you need is some way to rotate your view on the other end of the line, then you may consider Revolve Robotics’ KUBI. With six days left and just over $27,000 away from the $50,000 goal (the team was able to knock 50 percent off the original goal), this Indiegogo project hopes to offer a relatively affordable and simple telepresence solution for existing tablet users. The KUBI itself is essentially a tablet mount that can do a 300-degree pan plus 90-degree tilt, and the prototypes we saw featured two spring-loaded aluminium arms that elegantly pinches the tablet — we’ve been told that they can even fit Microsoft’s Surface in landscape. The robot is pretty much platform-agnostic as long as the tablet supports Bluetooth 4.0 Low Energy, which is how the robot receives its motion commands.

Continue reading Revolve Robotics’ KUBI spins your tablet around for teleconferences, we go hands-on

Filed under:

Comments

Source: Revolve Robotics

In-Win D and H-Frame PC cases: Tubes, and LEDs and aluminum oh my! (hands-on)

InWin D and HFrame handson

Let’s face it, PC cases are often pretty lame — and traditionally something we don’t chase down — though In-Win’s two launches at CES definitely beg for an exception. Heck, what can you say about a case? The D-Frame (pictured above) is pretty stellar with its glass sides, orange welded aluminum tubes, amazing fasteners, and blue LEDs would be an easy choice if we were building a new box around these parts. Though, the H-Frame with its radiator or layered gasket look is also a strong contender as we really dig its layered look and the solid metal thing it has going on. Both of these cases are seriously strong-looking, fairly hefty to haul, and in the case of the D-Frame crushproof. Look for these at you favorite In-Win retailer sometime this month for a hefty $399 each.

James-Trew contributed to this report

Filed under: ,

Comments

Princip Interactive LED Futuro Cube hands-on

Princip Interactive LED Futuro Cube handson

Playing around with ThinkGeek’s table full of toys was unquestionably a highlight of 2013 CES experience, which is (thankfully) nearly at an end. In amongst the always awesome licensed Star Trek and Star Wars toys was the Princip Interactive LED Futuro Cube, a strange game device created with ThinkGeek. The device brings to mind the Rubik’s Cube, if only because its a geometrical puzzle game. In place of colored squares are a series of different colored LED lights.

Like Rubik’s famous three-dimensional toy, the Futuro isn’t particularly easy to master. It has a menu system and offers up a series of audible commands to access its different games. Getting started takes a quick shake and it can be put to sleep with couple of taps. There’s also a USB port on one side for downloading software updates, including new games.

Filed under:

Comments

Source: ThinkGeek

AblePlanet preps a gaming headset with smart haptics, we preview the tech inside (hands-on)

AblePlanet and ViviTouch releasing a haptic gaming headset, we preview the technology behind it handson

Headsets with vibrating haptics aren’t exactly novel — we’ve already seen such offerings from Skullcandy as well as Sony. Now AblePlanet is coming out with something similar, but the underlying technology makes it considerably smarter than anything currently on the market. The company recently announced it’s pairing up with haptics firm ViviTouch to make a gaming headset that offers different-feeling vibrations depending on what kind of music you’re listening to, or what’s happening in the game. The as-yet-unnamed headset will go on sale within the next six to nine months, according to AblePlanet, with pricing to be announced at a later date.

Additionally, the companies plan to team up on other projects, including ear canal devices for field workers (firefighters, etc.) and even products for the hearing impaired. Before we get ahead of ourselves, though, we want to give you a quick preview of the headset, which we tested for a few minutes here at CES. Unfortunately, the set we tested today was merely a retrofitted NC1000CH plugged into a control box. Still, it gave us a good sense of what we can expect when the final product drops later this year. Meet us after the break to learn more.

Continue reading AblePlanet preps a gaming headset with smart haptics, we preview the tech inside (hands-on)

Filed under: ,

Comments

A look around Haier’s CES 2013 booth: HaiPads, plenty of panels and a wireless blender

A look around Haier's CES 2013 booth plenty of panels and a wireless blender

Haier had a pretty formidable booth here at CES, so naturally, we had to swing by and cast our eyeballs over anything and everything there. A wall of TVs greeted us, which turned out to be the company’s 2013 Roku-ready HDTVs and Android-packing smart models. Screens were everywhere, but there was also a table with some finger-friendly equipment like 9.7-, 7- and 5.3-inch HaiPads, as well as a Windows 8 laptop, touchscreen all-in-one and tab / laptop slider. The slider looked pretty nice, but all the aforementioned hardware was set up in Chinese, so we lost interest pretty quickly. A central hall booth wouldn’t be the same without a 4K TV, but not to worry, Haier had a couple on display — unfortunately, glare from all the other screens dotted around kind of dampened their impact.

What we were most interested in was all the prototype technologies on show, but all the Haier reps were from the US sales department, so not a soul could talk about the demonstrations. The eye-controlled TV we saw at IFA last year was getting quite a lot of attention, while the mind-controlled set we’ve also seen before was almost certainly playing a looping video to give the illusion something was happening. There were also several gesture-controlled models, but one wasn’t working and the other was hosting a very basic Kinect-type game. A ping-pong game played with a “Sensory Remote” was also up on one TV, but looked unresponsive and therefore, unfun. A multi-view demo using dual 3D specs did what it was supposed to, and a glasses-free 3D TV prototype showed nice depth as long as you were 12+ ft away (the camera can’t really replicate the effect, but there’s a quick video of it below anyway).

The booth also had a household section which we thought was safe to ignore, until a “wireless blender” caught the eye. “It’s just a blender with a battery in it, surely?” this editor asked. “No, there’s an inductive coil built into to the underside of the counter,” was the reply. Thus was our Haier experience at CES, and to revisit it through our eyes lens, check out the gallery below.

Kevin Wong contributed to this report.

Continue reading A look around Haier’s CES 2013 booth: HaiPads, plenty of panels and a wireless blender

Filed under: , , , , , ,

Comments

Pentax MX-1 digital camera hands-on: advanced compact in a retro body

This week we got the opportunity to take a peek at a hero device from none other than camera manufacturers Pentax, their MX-1 showing itself to be quite the looker for the 2013 Summer season. This machine is the very first advanced compact camera the company has ever presented, here showing a 12-megapixel sensor, 4x optical zoom, and a solid body with a classic look. This camera also comes with a 3-inch tilting display that’ll allow you to hold your unit above or below, the display pointing out at your face from any forward angle.

1stgweas

The lens on this machine is a 28mm F1.8 wide angle, making sure your next-level photos bring on a life that’ll make you want to stick with Pentax through the future. The middle of this device is a texturized rubbery black while the top and bottom are a cool metallic with brass panels up top and down below. This machine will be available sometime inside 2013, likely by the time Summer rolls around.

1st
1stwqeas
1stgweas
1stas
1stgwe23as

Also revealed this week was the Pentax Q10′s new ultra-vast collection of body colors. You’ll now be able to pick 100 different custom color combinations for the Pentax Q10 – and it still feels so nice to use this classic body and set of controls. Have a peek at pure red here and create your own at the Pentax studio online. You’ll be able to pick your own body color and your own grip color – go wild!

2nd_colors

For those of you that didn’t see this camera back when it was announced in September of 2012, it’s a real live interchangeable lens system-toting camera with a 12.4-megapixel sensor all in the size of “a pack of cards.” It’s small and it’s powerful, those two things are certainly true. Have a peek at a whole lot more CES 2013 coverage in our CES portal and be sure to stay tuned to our Pentax tag for more camera action all year long!

2nd23gga2
2nd
2nd2323ga2
2nd232
2nd2h3w2


Pentax MX-1 digital camera hands-on: advanced compact in a retro body is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

Martian Passport Watch mixes Bluetooth and class, ships by March for $299 (hands-on)

Martian Passport Watch mixes Bluetooth and class, ships by March for $299 handson

The world of Bluetooth watches is getting immensely crowded. After years of trying, it seems as if Bluetooth watch makers finally have a captive audience. The Pebble smartwatch seems to be leading the charge in the here and now, but for those looking for something a bit less Jetsons and a bit more Dick Tracy, there’s the Martian Passport. At a glance, the unit itself looks very much like a classic wristwatch, replete with analog hand dials, a knob to change the time, and a metallic casing. Look a little closer, however, and you’ll spot a 96 x 16 pixel OLED display, capable of displaying contact names for incoming calls and scrolling new text messages. It’s a bit thick (0.52 inches), but it houses a battery that can survive a full two hours of yapping, or seven days in standby. Those needing to juice it back up can do so in a couple of hours via the side-mounted micro-USB port.

Internally, there’s a Bluetooth 4.0 chip (which supports classic Bluetooth and Bluetooth low energy), a vibrating motor for notifications, a three-axis accelerometer, magnetometer, noise-cancellation microphone, and a couple of menu / select buttons on the left. The whole thing is shockingly well built, oozing quality from every possible pore. It’ll play nice with iOS and Android devices, and there’s an incoming iOS app that’ll add even more functionality in the near future. In our testing here at CES 2013, we found the watch to pick up calls and notifications from an iPhone 4S immediately, and the OLED panel was remarkably easy to see even from a few feet away. Chatting into the watch was predictably awkward, but undercover agents should feel right at home. In all seriousness, audio quality was crisp, and folks on the other end had no issues hearing us.

Is it worth the $299 asking price? That’s hard to say. The famed Pebble will begin shipping in just over a week for a measly $149, so you’d have to really prefer the look of this guy to pay double. If that’s you, you can get your order in through the source link below.

Filed under: , ,

Comments

Source: Martian Watches

Konka Expose 970 hands-on

Konka Expose 970 handson

Konka phones rarely (if ever) grace our desks at home, but the company certainly makes a solid effort to show them off to the masses at trade shows like CES. The latest device featured at Konka’s booth is the Expose 970, which offers a 4.5-inch qHD IPS screen, dual-core 1GHz unspecified CPU, Android 4.0, 8MP rear camera and 2MP front-facing cam. We took a few minutes out of the last day of the show to stop by and peek at the 970, and our experiences are just about the same as what we anticipated: the qHD display was clear and bright, the screen was actually quite responsive and the processor seemed to perform pretty well for a lower-end dual-core. The Kanzi UI is pretty easy to figure out — the icons are very reminiscent of what you’d find on Meizu’s Flyme OS. The phone is a little thicker than we’d like to see, and the back cover is definitely on the glossy end of the fingerprint magnet spectrum. If curiosity gets the best of you, head below to scope out a few images of the latest Konka.

Filed under: , ,

Comments