Gold iPhone 5s Teardown By iFixit

Gold iPhone 5s Teardown By iFixitEarlier in the day, we brought you word that there was an iPhone 5s teardown, except that it was not done by the folks over at iFixit, but rather, Australia’s iExpert. Neither was it the gold colored model that was taken apart, although the teardown then did reveal a slightly larger battery that should put to rest any potential arguments that the battery is smaller or of the same size as its predecessor. The folks over at iFixit have managed to wrap their hands around a gold iPhone 5s, and of course, they proceeded with the standard teardown.

After prying the iPhone 5s open, the iFixit team more or less touted that what they discovered within was more or less similar to the one in its predecessor, the iPhone 5. Of course, this is not to say there are no changes at all, but the changes are pretty much few in number. For instance, there is a cable that connects the fingerprint sensor to the Lightning port assembly, while there is no longer a pull-out tab for the 1,560mAh battery. The Touch ID itself is comprised of a bunch of capacitors which will do the job of “remembering” the ridges on your finger, and the 8-megapixel iSight camera has all the signs of a Sony constructed part.

  • Follow: Apple, CellPhones, , ,
  • Gold iPhone 5s Teardown By iFixit original content from Ubergizmo.

        



    iPhone 5s gets iFixit teardown treatment

    The folks over at iFixit have been busy today tearing into the new iPhone 5s, giving us all a look at what lies beneath its shiny metal exterior. The process took awhile, and reveals carefully packed hardware that — upon first look, at least — seems very similar to the iPhone 5′s internals. From there […]

    iFixit blows apart the iPhone 5s, fingers Apple’s Touch ID sensor

    iFixit blows apart the iPhone 5s, fingers Apple's Touch ID sensor

    Apple’s latest flagship smartphone is due in stores tomorrow morning, and naturally, iFixit has put one of the shipping units under a screwdriver before launch. We can’t say we’re surprised: these folks have sort of made a habit of it. The iPhone 5s teardown is currently marked as “in progress,” but the disassembly artists have already found the device slightly more difficult to take apart than its predecessor, due to the Touch ID sensor’s short connector cable. The new iPhone’s 1560mAh battery (a modest upgrade from the iPhone 5’s 1440mAh) is also held down by a ton of glue. The team expresses some concerns over the CMOS Touch ID sensor’s sapphire crystal cover, cautioning that its accuracy could degrade over time if it isn’t adequately protected. At the time of this writing, the 5s is still coming apart, and iFixit is adding more detail by the minute. Hop on over to the source link below to see the tear down in progress, or check back here later for an update with the company’s final word.

    Filed under: , ,

    Comments

    Source: iFixit

    The iPhone 5S Teardown: Everything New Is Inside

    The iPhone 5S Teardown: Everything New Is Inside

    The ace team at iFixit is currently gutting the iPhone 5S, as only they can, to see what’s new inside the next iPhone. What’s the fingerprint scanner look like on the inside? What about all those fancy new chips? And how’s that goldpagne?

    Read more…


        



    Access Thousands of Repair Guides (And Add Your Own) With iFixit’s Android App

    Access Thousands of Repair Guides (And Add Your Own) With iFixit’s Android App

    When it comes to teardowns and repairs, iFixit is one of our favorite go-to sources. The site contains thousands of useful guides, and with the launch of its rebuilt Android app today, you can now start adding your own to …

        



    Moto X Teardown: So This Is What Made in the USA Looks Like

    Moto X Teardown: So This Is What Made in the USA Looks Like

    If you’re curious as to what the lovely Moto X looks like on the inside, the surgical team at iFixit has exposed its designed and assembled in the USA innards for all to see. Apparently, you can see right through the woven black case on the Moto X. iFixit also found some other unique choices inside the Moto X too: the camera flash is its own assembly, the vibrator motor is soldered onto the motherboard and what they call the most modular headphone jack iFixit has ever seen. Oh and there’s a whole glob of glue too.

    Read more…


        



    Moto X iFixit teardown shows ample glue, scores 7 out of 10

    The folks at iFixit have tore their way into Google’s Moto X, laying its innards bare for all to gawk at while apprising the setup like a wizened surgeon. At the end of it all, though the handset did earn some elements of criticism, iFixit found it to be mostly easy to repair, giving it […]

    iFixit teardown of Moto X finds it plenty repairable

    DNP iFixit disassembles Moto X, finds TKTKTK

    Mere hours after the Moto X made it to stores, the iFixit guys have already torn it apart, revealing its innards to all. The guts of the American-assembled handset aren’t entirely a surprise: under the hood we’ve got a motherboard, 16GB of eMMC NAND storage, the usual rear and front camera modules, inductive charging coils and a 3.8-volt 2200mAH lithium-ion battery. The disassemblers praised the replaceability of various modular components, as the tablet uses only one type of screw throughout. Its taped-in battery, display-fused digitizer and sticky adhesives took the Moto X down a few pegs, but its final score of 7 out of 10 still makes this one of the more easily repairable smartphones on iFixit’s list. To have a look at just how Google and Motorola’s lovechild was put together, hit the source link below.

    Filed under: , ,

    Comments

    Source: iFixit

    NVIDIA SHIELD teardown shows off internal gaming guts

    You’ve already read our review of the NVIDIA SHIELD (you have, right?), but now it’s time to take the sucker apart and see what kind of glorious circuitry is floating around in that gamepad. iFixit is at it again with another teardown featuring NVIDIA’s latest product, which welds a foldable display on a game controller […]

    NVIDIA Shield teardown dives deep inside the massive handheld

    NVIDIA Shield teardown dives deep inside the massive handheld

    The folks at iFixit are braver souls than us, taking on NVIDIA’s tank-like new gaming handheld, the Shield, in a teardown. Shield’s cavernous shell houses a mess of multicolored parts, and hilariously reveals its Batman mask-esque properties when freed of said parts. Though it certainly doesn’t look like an easy process, the repair site offers a six out of 10 rating; it specifically cites the battery and screen as being tricky to replace.

    NVIDIA’s Shield was a big surprise at this year’s Consumer Electronics Show — CEO Jen-Hsun Huang showed up with the device on-stage during his company’s press briefing, where he used it to demonstrate the just unveiled Tegra 4 processor. We finally got our hands on the final retail version earlier this month and you can find the full review right here. Consumers can also finally purchase the $300 handheld as of yesterday.

    Filed under: , , ,

    Comments

    Source: iFixit