Wacom has been making accessories for computers that allow users to digitize their handwriting or draw by hand on the computer for a long time. The company has announced a new addition to its pad line called the Bamboo Pad Wireless. As the name implies, this particular device connects to your computer wirelessly allowing users […]
In an age where expecting humans to limit themselves to a single piece of electronics is a little too much to ask for, what could be better than to own a physical hub where multiple things can be charged simultaneously? In all seriousness, though, the Griffin MultiDock can indeed be a rather handy tool for businesses, schools and other organizations needing to store, power and sync a large number of devices at once.
What’s also good about the second-gen MultiDock is that it’s no longer only compatible with iPads, allowing a multitude of slabs from different manufacturers to be housed inside of it. Griffin’s also quick to point out that the new MultiDock’s design was the result of a collaboration with designer Thomas Meyerhoffer, who’s more famously known for having worked on the Apple eMate. Regardless, be prepared to break the piggy bank, since the MultiDock’s set to be priced starting at $699 when it becomes available later this month.
Filed under: Misc, Peripherals
Source: Griffin
You might say the day is never really done in consumer technology news. Your workday, however, hopefully draws to a close at some point. This is the Daily Roundup on Engadget, a quick peek back at the top headlines for the past 24 hours — all handpicked by the editors here at the site. Click on through the break, and enjoy.
One thing that most notebook users have in common no matter the brand of machine they use is the need for more storage space. When your typical Windows-powered notebook runs out of space adding a larger hard drive is relatively straightforward but things can get tricky if you use a MacBook. A company called OWC […]
Gaming peripherals are great because they are built to last long, since gamers aren’t always delicate with their devices. They also pack plenty of features, making them more useful than just plain-Jane peripherals.
The Logitech G602 gaming mouse comes with 11 programmable buttons, which is pretty sweet. The design of the mouse fits the hand neatly, and it has got a 2500 dpi optical sensor, and the ability to change sensitivity on the fly.
Contrary to typical gaming mice, this one is also wireless and it will run for up to 125 hours on a single AA battery. With 2 AA batteries in place, the mouse should run at least 250 hours. Plus, there’s an enduro mode that will make them last for over 1,400 hours!
The Logitech G602 gaming mouse will cost $79.99(USD) and will be available in September on shelves, is available for pre-order now over on Logitech’s website.
It’s been a hot minute since a new Zink printer made it through the wringer, but here we are staring at the latest duo. Designed to be coddled and cuddled by craft gurus and those who place an exceptionally high value on organization, the hAppy and hAppy+ smart app printers utilize the outfit’s full-color, ink-free zRolls for printing. Each one is WiFi-enabled and engineered to travel well, with the $199 base model supporting print transfers from iPhone, iPad, iPod touch and Android devices.
On the stock hAppy, you simply download a corresponding app, design what you need printed, and send it over the air. The $299 hAppy+, however, ships with Android in the device, allowing you to fiddle around with its touchscreen and create print designs without any other hardware involved. Of course, we’re guessing that you’ll be quite limited on what masterpieces you’ll be able to muster on such a small canvas, but hey — who are we to judge your creative prowess?
Filed under: Peripherals
Source: Zink
Gaming peripherals, while pricey, are quite durable and full of features that even the sternest desk-jockey can appreciate. Recently, I saw a couple of LED-powered keyboards that had me drooling, since they lit up very brightly to highlight gaming keys. The Mad Catz RAT has always been an extremely good mouse for gaming, since it allowed you to get the perfect shape for your hands. If you don’t like to buy off-the-shelf peripherals like these, then check out this 3D-printed alternative.
Granted, the Statial mouse housing costs a lot more than I expected, but if you can get similar functionality to a higher priced mouse, then you’re still winning. The Statial is a cover that will turn any Logitech M100 mouse into an adjustable alternative. Each section of the Statial cover can be adjusted to fit the form of your hand. The Statial was designed by Pyott Design.
Unfortunately, the $69.99 price tag for the shell on Shapeways makes this kind of a non-starter, since you can buy gaming mice with more functionality for the same total price. Still, if you’ve got the blueprints and a 3D printer, you can always print your own custom mouse cover.
Lest you think ASUS‘ Computex 2013 range is all tablets and glossy ultrabooks, never fear: the company also has some new desktop PCs, kicking off with the Mac mini-rivaling VivoPC and its matching hybrid VivoMouse controller. Angling for a spot under your TV, the ASUS VivoPC is a compact Windows-powered media center, while the VivoMouse tries to take on the duties of a mouse, a touchpad, and a remote control all in one.
ASUS hasn’t fully detailed the VivoPC’s specifications yet, though an Intel processor inside seems more than likely. It’s also been designed with upgrade potential in mind, not something you could normally say about a SFF computer of this scale: lift off the lid, and you can pull out the hard-drive and RAM for replacement. There’s a standard SATA 6GB/s connector inside.
Connectivity, meanwhile, includes WiFi a/b/g/n/ac, an SD card reader, two USB 3.0 ports, four USB 2.0 ports, and HDMI. There’s also an optical digital audio output, a legacy VGA port, wired ethernet, and audio in/out. ASUS is pretty keen on its use of SonicMaster audio, too, and is positioning the VivoPC as an ideal hub for squirting music and video wirelessly around the home.
The whole thing stands 56mm tall, and ASUS says it takes up less of a footprint than an A4 sheet of paper (that’s under 8.3 x 11.7 inches).
ASUS VivoPC:
You’ll need something to control all that from your couch, of course, and that’s where the ASUS VivoMouse waddles in. The round-faced peripheral slaps a touchpad on top of a standard mouse, which means you can fondle and stroke it around the screen as well as use Windows 8 gestures.
There’s also remote control functionality, for playing/pausing and skipping through content you’re watching on the media center. It’s wireless, of course, though like the VivoPC there’s no word on how much it will cost when it reaches store shelves in Q3 2013.
ASUS VivoMouse:
ASUS VivoPC and VivoMouse make a high-design play for your living room is written by Chris Davies & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.
LG Electronics Japan is releasing a mobile photo printer called “Pocket photo” in early June. With the “Pocket photo”, you can take a photo with your smartphone and print it out right away, anytime, anywhere.
It’s similar in size to smartphones, so it’s easy to carry around.
To get started using it, install a free dedicated application called “Pocket photo” to a bluetooth compliant smartphone. With this app installed, when you take a photo with your smartphone, you can edit or decorate it with functions on the app and then press “Print” on the smartphone display. The print job is sent wirelessly, and 45 seconds later, it is printed out.
Ink cartridges are not needed. Printing is handled through special “pocket photo paper” (“ZINK photo paper”)
Estimated price: ¥15,800
Size: 72.4(W) × 120.9(D) × 24(H) mm
Connection method: Bluetooth
Battery: 500mAh lithium polymer rechargeable battery (charging time 1.5 hour)
Compliant OS: Android 2.2 or later/ iOS 5.1 or later
Accessories: Instruction booklet, quick reference guide, USB cable, battery charger, Pocket photo paper (ZINK photo paper)
The Delta Six gaming controller first hit Kickstarter last fall, but the plug was pulled from the crowdfunding effort by its creator David Kotkin, as he reckoned it wasn’t on track to generate enough support. With hardware and software refinements made over the last few months, the peripheral has just been relisted on Kickstarter. In case you need a refresher, the peripheral puts a premium on realism and motion-enabled gaming. Thanks to accelerometers, gyroscopes and buttons in odd places, users can do things such as bring up in-game sights by looking down the plastic rifle’s barrel, or steady their shot by pulling the faux weapon close to their arm.
Now, the campaign is asking $159 for controllers with black or white paint jobs and orange tips, as a second look at production costs indicated the project’s original $89 price tag was too low. This time around, the funding goal has been locked in at $100,000, instead of a cool half a million. As for internals, the shooter is toting an Arduino, which opens up the hardware to software updates and customization. Not only will the blaster work with PC, Xbox 360, PlayStation 3 and the Wii U, but it’s set to boast compatibility with next-gen consoles through an update, to boot. If the Delta Six reaches it fundraising mark, it’ll ship out to supporters in December. Check out our hands on with the contraption or head past the break for Kotkin’s video pitch.
Filed under: Gaming, Peripherals
Source: Kickstarter
This is site is run by Sascha Endlicher, M.A., during ungodly late night hours. Wanna know more about him? Connect via Social Media by jumping to about.me/sascha.endlicher.
