Rocking Horse Tauntauns: I Want to Rock and Roll All Night and Party on Hoth Every Day!

There is something special about old timey toys like rocking horses. They are simple and require a child to use their imagination. No fancy lights or voice activation here. Just good old fashioned play. Well, if you like the simplicity of the rocking horse, but want a geeky spin on it, look no further. I present to you the Tauntaun rocking horse.

tauntaun rocking horsemagnify

They don’t smell like the real thing, thankfully and will provide hours of rocking fun, while you pretend that you are on Hoth. I’m not sure who made these, but they are awesome, and whoever did it needs to step forward so we can give them the credit they deserve.

Heck, I would use one of these as a chair and rock all day while I work. Kids shouldn’t have all the fun.

[via SYFY City and Geek Crafts]

Mixee Bobblers 3D Printed Bobbleheads: Collect Yourself

3D printing shop Mixee Labs – makers of awesome geeky jewelry – will soon launch a custom bobblehead printing service called Mixee Bobblers. As with the jewelry, Mixee Bobblers will let you design your own bobblehead right from your browser.

mixee bobblers 3d print bobblehead 620x387magnify

Mixee Labs opted for cartoonish parts and features, making its bobbleheads look like a lot like Nintendo Miis.

mixee bobblers 3d print bobblehead 2 620x386magnify

Each Mixee Bobbler is 2.5″ tall and is 3D printed – spring included – from sandstone and nylon plastic.

You can make and order your own Mixee Bobbler starting January 21 for just $25 (USD) each.

Own the War Doctor’s Sonic Screwdriver! (Not for Assembling Cabinets)

If you are a fan of Doctor Who, you have probably seen the 50th anniversary episode called “The Day of the Doctor.” In that episode, you might recall the fancy sonic screwdriver that the War Doctor used.

war docmagnify

ThinkGeek has the official replica of the War Doctor’s sonic screwdriver compete with sound and light effects. This battery-operated sonic screwdriver has four sound effects and the LED on its tip lights up red and amber.

1980 the other doctors sonic screwdriver from dotd

The replica is operated using a slider on the side. The entire thing measures 8.25-inches long and about 1-inch wide at the widest point. You can grab the War Doctor’s Sonic Screwdriver from ThinkGeek for $29.99(USD).

BeeWi Bluetooth Fighting Mini Robot has IR eyes to blast enemies

We have talked about some of the remote controlled toys from BeeWi in the past. The company rolled out its sumo and soccer playing RC robot in September 2013. BeeWi … Continue reading

My Little Cthulhu: Friendship Is Insanity

An ancient evil has awakened. And he is so adorable! This cute Cthulhu pony comes from Bigshot Toyworks who is developing a Cthulhu-themed My Little Pony named Maddie. She is one of the characters in their upcoming toy and animation series aptly called “Friendship is Maddness.”
Cthulhu ponymagnify

Yes. Yes it is. And cuteness. And insanity. This pony looks a bit like an Ood from Doctor Who as well. This one will not be the only newly-designed toy, but I’m guessing the story centers on her.

Cthulhu pony1magnify

Judging by this one, that should be a very cool animation and toy series. I would watch the heck out of that Cthulhu pony show.

cthulhu pony 3magnify

[via Laughing Squid via Neatorama]

Cardboard Rocket is combustible but fun for sure

cardboard-rocketA child is one who has plenty of imagination, so much so that when you hand him or her a normal cardboard box, they will be able to turn it into a spaceship, a time machine, a race car, the list goes on and on. Having said that, how about a specially manufactured piece of cardboard that will literally add some color and light to your child’s life? We are talking about the £39.99 Cardboard Rocket, where it is a snap to assemble, not to mention ready to be painted as well as decorated. Oh yeah, and the trees of the hills will undoubtedly be relaxed, since the Cardboard Rocket itself is made out of environmentally friendly cardboard.

The Cardboard Rocket will be avaialble in white (all the easier for you to paint it with afterwards), and comes in a sturdy corrugated cardboard outer for storage when not in use. Following in the footsteps of furniture giant IKEA when it comes to its packaging, the Cardboard Rocket would be flat-packed, measuring around 113cm x 105cm x 5.5cm. Once it has been fully assembled and constructed, it will measure around 90cm x 162cm x 90cm. Needless to say, at such dimensions, adults are strictly prohibited from joining in the adventures of your child’s imagination.
[ Cardboard Rocket is combustible but fun for sure copyright by Coolest Gadgets ]

PowerUp Turns Paper Boats into Motor Boats

Paper boats are fun craft projects for kids. And not just kids who lived in the 1800s either. I’m sure some kids and adults still make paper boats and set them in the water, watching the wind move them along. Well, now the PowerUp Boat updates things a bit.

powerup boat 1 620x448magnify

The PowerUp Boat Motorized Paper Boat Kit is for modern kids who still like to play with toys in the tub. Just fold the boat, attach the motor, and let it cruise across the surface of the water. The paper is waterproof and the little flag and anchor make it look more authentic. Too bad the motor isn’t electric – it’s the wind-up type, so it will only give you about 10 seconds of cruising at a time. On the other hand, you’ll never run out of battery.

motor boat1magnify

This is a cool toy at just $12(USD) from ThinkGeek. What’s old is new and fun again as well. Time to play pirates on the high sudsy seas. Ahoy mateys!

Knit Alien Facehugger Will Keep You Warm. And Screaming.

Look what grandma Xenomorph made you for Christmas! It’s a life-size facehugger hand knitted by Etsy seller Katie aka Knitrocious. Its legs have clips on their ends so you can wrap it around your head or any part of your body for that matter.

knit alien facehugger by knitrocious 620x415magnify

You can order the knit facehugger from Knitrocious for $150 (USD). If that’s too pricey for you, you can wait for ThinkGeek’s plush version to be back in stock.

[via Fearnet]

Alien Egg Replica Launches Tiny Facehugger

If the Alien films taught us anything it was never to look into the top of an open alien egg. You know a facehugger will hop out and puke itself down your throat. ThinkGeek now has a perfect gift idea for fans of the Alien franchise.

facehuggermagnify

The inside of this replica alien egg glows with an eerie green light and has a little facehugger sitting there inside. The egg itself has open flaps and is designed to look like the one Ripley discovers in the films. The coolest part of this egg is that once you trick your friends into checking out the shiny lights, you can press a button on the front of the egg and a facehugger shoots out at them.

1556 alien egg launching facehugger

The egg is 4.5 inches-tall and the facehugger is 8 inches-long. The Alien egg is available now for $29.99(USD) over at ThinkGeek. It’s too bad you can’t launch the facehugger with a motion sensor or remote control of some sort. Time to start hacking…

Curio is an interactive animatronic toy you can program and play with (hands-on)

SONY DSC

It’s always nice to have a little buddy around that’s trained to do what you want it to. Some of us get dogs or other furry creatures, but a start-up called Curio is hoping there’s a good chunk of folks who would like to have a robotic companion, too. You see, Curio is a cute little bot platform filled with a pair of motors that move its mouth and head, and has a small LCD screen that serves as its face. The toy clips to any smartphone or tablet running the associated app, which in turn allows users to set its facial expression, determine its movements and even tell it what to say.

While the app will come with a bunch of pre-set actions, expressions and sounds, its makers are also working up a programming portion of the app, so tinkerers can create their own custom Curio mods. This programming interface is a series of parallel timelines that allow you to chronologically lay out different facial expressions, movements and audio simply by dragging and dropping them where you like. And Curio’s built to be physically customized, too. Company founder Mike Kneupfel thinks that his bots can take advantage of the 3D printing craze by letting folks make their own tails, ears, and other accessories that clip onto Curio. He tells us that he aims to put a bunch of accessory blueprints on MakerBot’s Thingiverse to make it easy for folks to print stuff out, but he’s hoping that users will get creative and design their own as well.

Filed under: ,

Comments