Hasta La Gadget!

Acer has ditched plans to push Thunderbolt on its Windows PCs, turning instead to USB 3.0 despite being the first PC manufacturer to support Intel’s high-speed connection. According to Acer, which first included Thunderbolt on the Aspire S5 ultrabook in early 2012, it’s a matter of cost, USB 3.0 offering comparable speed among other advantages, and the continuing shortage of peripherals actually using Thunderbolt technology that have soured it on the port.

“We’re really focusing on USB 3.0 – it’s an excellent alternative to Thunderbolt,” Acer spokesperson Ruth Rosene told CNET. “It’s less expensive, offers comparable bandwidth, charging for devices such as mobile phones, and has a large installed base of accessories and peripherals.”

Acer was one of a trio of PC manufacturers said to be shifting interconnect attention to Thunderbolt back in 2012, including ASUS and Lenovo. Since then, Dell, HP, and Gigabyte have all released laptops or desktops with the port, which offers 10 Gbps in each direction simultaneously.

Apple is the company most associated with Thunderbolt, however, including the port on all of its current MacBook notebooks, and most of its Mac desktops. The new Mac Pro 2013 will even debut Intel’s second-gen version, Thunderbolt 2, with even greater bandwidth.

Whereas the current Mac Pro is a sizable tower, the new version is a far smaller cylinder. Instead of offering multiple internal bays for expansion, Apple expects Thunderbolt 2 to be used, with six ports in total, each offering daisy-chaining support for up to six devices, for a total of 36.

Exactly what devices will be hooked up is perhaps Acer’s lingering concern. The market for Thunderbolt peripherals remains small, with high-speed external storage often using SSDs the most common application. They’re expensive, however, and target a niche audience; even the new Mac Pro includes USB 3.0 ports, recognizing the connectivity standard’s ubiquity.

Acer abandons Thunderbolt in favor of cheaper USB 3.0 is written by Chris Davies & originally posted on SlashGear.
© 2005 – 2013, SlashGear. All right reserved.

Buffalo has revealed its latest external drive, the DriveStation DDR HD-GDU3, slotting more RAM into the USB 3.0-connected enclosure so as to rival SSD speeds, allegedly, with HDD pricing. The new drive, available in 2TB and 3TB capacities, uses traditional spinning-platter disks to keep prices down, but Buffalo claims that thanks to a combination of caching and other tweaking it’ll reach write speeds of up to 400 MB/s.

That’s a pretty impressive number for an HDD-based external drive, if Buffalo can sustain it, while the quoted read rate of 330 MB/s is also ample. In fact, Buffalo claims, it’ll take around 3.5s to shuttle 800MB of photos from a PC to the DriveStation DDR.

So far, high-speed has generally been synonymous with SSD, with solid-state drives cropping up in models like LaCie’s Little Big Disk. That uses not only solid-state storage for performance, but hooks up via Thunderbolt.

Buffalo has stuck with USB 3.0, which is theoretically a “narrower pipe” than Thunderbolt, but arguably makes up for it by being more commonly available (plus backward-compatible with USB 2.0, albeit with a speed hit). It’ll work with both PCs and Macs.

The DDR’s trick is more cache than you’d usually find in an external drive: in this case, 1GB of DDR3 memory. Buffalo is being coy with the details, but says that by buffering files during larger jobs, it can bypass the bandwidth limits of traditional HDDs and push content through the USB 3.0 connection more readily.

We’ll have to wait until we can test the DriveStation DDR out ourselves before we know how accurate that all is – in our experience with drives that use caching systems, we’ve generally found that the performance isn’t necessarily consistent across all content stored. The drive is shipping now, priced at $159.99/£129 for the 2TB model and $209.99/£169 for the 3TB model.

Buffalo DriveStation DDR claims SSD speeds with HDD hardware is written by Chris Davies & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.

We’ve talked about Flash Rods flash drives that look like toy cars several times over the years. My favorite continues to be the Back to the Future DeLorean. The company has offered several other versions of its vehicular flash drives over the years and they’ve all had USB storage of one sort or another stuffed inside. The company has just announced its new mid-size Flash Rod line.

Like all of the drives in the Flash Rods family, these are storage products with a storage device crammed inside of a toy car. The biggest difference in the new mid-size range from the company and some of the other products offered is that the storage hardware itself uses USB 3.0 connectivity.

All of the other drives from the company have used USB 2.0. Moving to USB 3.0 storage devices means that transferring files to and from the Flash Rods will be faster than ever before.

The drives are compatible with both Windows and Mac computers. You can choose from several different card types including a Shelby Cobra, a 67 Mustang, and several others. The 32 GB version sells for $110(USD), while the 64 GB version costs $130. They’re available now over at Flash Rods.

[via EverythingUSB]

Introduction

A few weeks ago, Synology contacted us with the question “Have you spotted our latest 2-bay DS713+ and DX513 expansion unit?”. Honestly this model seemed to have slipped to capture our attention because we were thinking “Oh, it just has to be the old DS712+ upgraded with USB 3.0 ports…”.

Synology said no, it is a lot more than just the USB 3.0 ports. So we decided to try it, look at it and test it just like we did last year with the new 5-bay DX513 expansion unit. Didn’t put our hopes up too much, since the DS712+ was already a very decent unit putting down a solid performance ratio.

Synology’s DS713+ key features:

• 202.3 MB/sec Reading, 135.84 MB/sec Writing Speed1
• Dual Core CPU & Super-Speed USB 3.0 Ports
• Dual-LAN Failover and Link Aggregation Support
• Hassle-free Scalability Up to 7 Drives With Synology DX513
• Extensive Surveillance With 20 HD IP Camera Capacity
• VMware® with VAAI support, Citrix®, Microsoft® Hyper-V® compliant
• Easy-to-Use Synology DiskStation Manager (DSM)

Synology is aiming for the budget minded SMB users who put cost-efficiency and high performance on their requirements list. That said, on paper it cranks up both read & write speeds, comes in the faster USB flavor, and doesn’t back down on expandability. With up to 20 surveillance cameras connectable, 5 extra disks (via DX513 unit) and all the high-end business compliancy you either love or hate (Citrix, VAAI, Hyper-V…) it looks a cracking device. Very promising!

System specs

• CPU Frequency : Dual Core 2.13 GHz (Floating Point)
• Memory : DDR3 1 GB
• Internal HDD/SSD : 3.5″ or 2.5″ SATA(II) X 2
• Max Internal Capacity : 8TB (2X 4TB  Hot Swappable HDD)
• External: USB 3.0 Port X 2, USB 2.0 Port X 1, eSATA Port X 1
• Size (HxWxD) : 157 x 103.5 x 232 mm
• Weight : 1.69 kg
• LAN : 2 ports Gigabit with support for Link Aggregation
• Wake on LAN/WAN

• System Fan : 92 x 92 mm x1
• Wireless Support (dongle)
• Noise Level : 19.2 dB(A)
• Power Recovery
• AC Input Power Voltage : 100V to 240V AC
• Power Frequency : 50/60 Hz, Single Phase
• Power Consumption : 30.72 W (Access); 17.88W (HDD Hibernation);

• Operating Temperature : 5°C to 35°C (40°F to 95°F)
• Storage Temperature : -10°C to 70°C (15°F to 155°F)
• Relative Humidity : 5% to 95% RH
• Maximum Operating Altitude : 6,500 feet
• Certification : FCC Class B, CE Class B, BSMI Class B
• Warranty : 3 Years

On the software side the most notable features are:

• Max File System Size : 108TB
• Max iSCSI Target # : 32
• Max iSCSI LUN # : 256
• iSCSI LUN Clone/Snapshot
• Supported RAID Types : Synology Hybrid RAID (SHR), Basic, JBOD, RAID 0, RAID 1
• RAID Migration : Basic to RAID 1
• Volume Expansion with Larger HDDs : Synology Hybrid RAID, RAID 1
• Synology Expansion Unit Support : DX513/DX213 (supports RAID-5, 6 and 10 with hot spares)

• Max User Accounts : 2048
• Max Groups : 256
• Max Shared Folder : 256
• Max Shared Folder Sync Tasks : 8
• Max Concurrent CIFS/AFP/FTP Connections : 512
• Windows Access Control List (ACL) Integration
• VMware vSphere 4 and 5 with VAAI
• Windows Server 2008 and 2012
• Citrix Ready

The full specifications sheet is available here.

Design

The DS713+ has a lot in familiar with its predecessor. Actually, if it wasn’t for the removal of the Synology brand name in white, the differences are very hard to spot since the old and new model look visual twins.

The all-matte black-colored outer shell still consists of thin rolled steel; the front and back are made of PVC. Everything looks well built and lives up to the business appeal. The 2 drive bays are the exact same push-tray system used for most devices from the SMB series, all very durable and of “no-nonsense” approach. A nice feature is the twist-locking mechanism, avoiding the trays to snap out in case somebody would push them.

On the back of the unit the blue color on the USB ports reveal the upgrade to USB 3.0 ports. The fan still remains the 92mm model from the predecessor, equally kept intact is the ESATA connector for the expansion unit.

The power brick that comes with the DS713+ appears to be the same one as the old DS712+, however due to some eco-efficiency modifications to the new model this one should draw a few less watts through the wall plug.

The DX513 expansion unit’s design is a bit different than the old one. Glossy front, solid rolled steel in matte black give it a slightly more expensive look. Drive trays have been upgraded, last year’s model had snap-locks (a switch system, where you pushed in the disk, and pushed a little switch down to lock the whole disk tray), this year’s model uses the exact same twist lock as the DS713+. On the back of the new expansion unit you can probably spot the most visually differentiating item compared to the old one: removable fan-mounted brackets.

Acoustics

In the acoustics department the DS713+ does a pretty steady job. It doesn’t annoy you in standby/sleep mode, the 92mm fan on low-power or silent mode has thought itself how it can keep the user pleased by NOT trying to mimic an industrial grade server rack the size of a cookie box.

However it has to be said, there is a “thingy” with the fitting of the disk brackets in the DS713+, it might be only our test-dummy, but once the disk was mounted and plugged in the unit started making slight vibrations who became audible during long time operation.

So we fixed that… with an EPDM strip (yes, that’s what normal people call “a piece of pond liner”). We’ve seen this rattle issue before with a Shuttle OmniNAS, so this time we knew how to arm us against rattle. Fairly simply put: you apply a very tiny strip of EPDM rubber on the slider of both drive rails, causing a lot more friction between the tray and the drive cage = noise gone.

It has to be mentioned that the DX513 expansion unit used the exact same rail type, and is more silent than the DS713+. The new expansion unit comes with 2 user removable 80mm fans. Although when I first saw Synology’s choice/opt for 2x 80mm fans I was very skeptical. Why? When they could have easily went for a 2x 92mm or 1x 120mm more silent solution… Well It’s impressive, but the 2x 80mm are incredibly silent, the built quality of the expansion unit is very sturdy and well balanced (pretty heavy too, which is good for the purpose).

A separate note on the removable fans on the DX513 expansion unit: this is a GOOD improvement! I really liked to see how they allowed the fans to be replaced/removed/cleaned without having to power off the NAS and first remove all the drives, crack open the whole casing before you had access to the rear cooling fans. This time you can take out both fans by removing the bolts that hold them into place at the back of the unit.

Don’t forget to turn off the beep warning before you remove them from the power socket for cleaning, cause the NAS will turn on the alarm if it detects a fan being deactivated/failing.

A word on power efficiency

It has to be said that the upgraded DS713+ adds a lot more spice to the Synology recipe compared to the old model. Usually these units tend to consume less power with every generation, yet this time (for the DS713+) this is not the case. The power draw increased by 3w during operation, whilst the sleep mode power draw has remained intact. It is relatively fair to say that the increased capability of the USB 3.0 (being able to sport much more hungry devices) and the Intel Atom boost from 1.8Ghz to 2.16Ghz also elevated the power consumption. Though 3w is still considered fairly moderate for this type of highly capable networking device.

• The new DS713+: 31w during operation, 18w in sleep mode
• The old DS712+: 28w during operation, 18w in sleep mode

When looking at the DX513 expansion unit, it’s a totally different story. On the outside it might not have had an epic design makeover, but on the inside (logic board) the improvements are vast.

The DX513 gets away with 45w where the old DX510 required 30% more “juice” to get the same errands done. Another (and more impressive) fact is the support for deep sleep, which reduces the “sleep” power draw by a whopping 900%.

• The new DX513: 45w during operation, 2w in deep sleep mode
• The old DX510:  59w during operation, 18w in sleep mode

Surveillance, download, and various apps

Synology has always been down with the pack when it comes to apps and availability. Actually there are already so many apps out there for your devices that its becoming increasingly hard to feature something new in every review made. We know for example that they have introduced streaming video features, however this SMB unit doesn’t have a dedicated HMDI out for that, so we’ll focus on that part for a future device.

What we can highlight for the SMB user is that the business features have been tuned up, please give this link a read.

Particularly handy are the data backup & replication settings and integration with their native cloud services. Making it easier than ever to share your document in the cloud with yourself, your clients, or the people you value obtaining them in real-time.

Another great feature for Synology is the improved DSM. Installation right “out of the box” has never been this easy. With previous versions one had to download the latest DSM from their website, or use a potentially older version that came in the box (cd). Now the new system auto-detects a first-run and asks you if you’d like to install your own DSM, or use a version present by default on the NAS’s internal memory.

That’s a first for Synology. And its real easy, you just tell it to use the DSM present. After the installer has run you through the easy step-by-step configurator it will auto update to the latest DSM for you. Pretty convenient way to set everything up without losing too much time using the cd or manual DSM download.

Speed & performance

We are providing you with a simple table of file read/write actions we performed and which represents a more real world model of what users actually do with their NAS devices. These test are averages from Windows (SMB) and Apple (AFP) systems.

Description:

1. A set of 100 HQ JPEG photos in folder
2. A bulk of 1000 itunes audio files
3. A 4GB folder containing mixed small files and folders
4. A 8GB single file archive
5. A 35GB folder with 10*3.5GB files inside
6. An 800MB single file archive
7. A 350MB episode

Table 1: Native 2 disk mirrored RAID. (RAID-1 without Expansion unit)

Now compare these numbers with the results we got from last year’s DS712+ (the predecessor of the new DS713+, see table below). You can clearly notice up to 30% speed gain in Raid-1. It’s nearing the speed limit of the gigabit network adapter, which is a very solid improvement over the old model.

Particularly noteworthy to mention are the ATTO results on windows. This is one of the very few “moderately priced” NAS units we’ve tested that pushes forward a maximum speed of 118Mb/Sec in both read and write.

Table 2: RAID5 ( 3 disk mode, 2 native in DS713+, 1 disk in DX513)

Comparing these results with last year’s model (see table below), we can again see a very solid speed boost in the write speed to the Synology DS713+. It has to be said that this 2-bay units really shows its performance potential when hooked up with the expansion unit.

Upgrading hardware

The DS713+ isn’t the easiest unit to upgrade if you’re not a DIY nut but it’s not mission impossible either. Upgrading the RAM memory requires the removal of the rear PVC backplate and rolled steel cage, after that you have access to remove the logic board to replace the SODIMM module (default 1Gb, but can be replaced by a 2Gb or higher if required).

Personally we’ve seen over the years that Synology isn’t a big fan of users replacing or modifying their units. Just like this DS713+ they’re made to be purchased, plugged into the power socket, and “simply do their job”. People who own the latest 4 bay models will probably agree that the new approach towards click-together plastic outer shells clearly don’t want to be opened by non-authorized Synology technicians. So unless you read “Warranty void if opened” as “surprise inside”, best to let Synology handle your repairs or upgrades

Final verdict

Last year’s version was already a solid device being well capable to deliver quality performance for most small business users out there. This year’s DS713+ spiced up the writing speeds by 30-40% depending on RAID configuration. Adding high speed USB3.0 to the plate, and an improved installation guide with DSM “built-in” makes the DS713+ again a killer bee.

Very possibly the only negative bit we can come up with were the internal acoustics when the hard drives were actively spinning, though this could be solved with some DIY tweaks. Power draw seems to be few watts higher, again not a point we can mock on as the DS713+’s specifications come up much more muscular compared to last year’s DS712+.

Although we’re supposed to be enlightened by the “main unit” (the Synology DS713+), we’d lie if the DX513 expansion unit left us cold. To contradict, I’d rather state the new expansion unit made quite a show for itself. How can’t it be? Dramatically improved energy efficiency, user-replaceable cooling fans on brackets and a more silent unit are all it needs to make the DX510 better and transform the old pumpkin into the new DX513!

The expansion unit doesn’t only bring speed gain to the already nice DS713+, it goes way beyond “just expansion”. A few examples why you too could benefit from getting an expansion unit:

–        Use the DS713+ as a mirror-RAID solution for work related, use the DX513 to create another RAID for all your home-related sharing/streaming/backups.

–        Use the DS713+ as a media device for home, use the DX513 for a RAID-5 array and create for all home/biz users their own network folder (or disk) for private backup and/or public sharing.

–        Use the 1^st gigabit network output for a 24/7 Mirrored-Raid web server or FTP, use the 2^nd gigabit network output to drive all your local home or business NAS features like sharing, iSCSI, backups, etc… by keeping the public web shared part on a completely separated network lane from your private data.

–        And so many more combinations…

This week it’s time to get goofy with a brand new set of updates to Mimoco’s Uglydoll MIMOBOT Flash Drive collection – Big Toe included! The collection you’re seeing here has the Big Toe character leading the way in this newly massive 128GB USB 3.0 stick set, each of these little monsters working not only as a storage stick on their own, but as a repository for a suite of wallpapers, icons, and avatars right out of the box! That’s so cute it’s sickening!

With the Big Toe you’re going to be bringing this “unstoppable force of knowledge” to your computer the same way you’ve brought him into your heart with the plush he’s been represented in before today. This cute beast joins Babo, Wage, Ice-Bat, and OX in the full Uglydoll collection. This whole collection is now available in 128GB storage stick size as well!

“Mimoco has always had a pretty awesome relationship with David Horvath and UGLYDOLL. We couldn’t be happier to produce yet another character with Pretty Ugly, especially since Big Toe is an original UGLYDOLL character from 2007.” – Mimoco PR gal Jessica Smiley

Each little bot contains its own unique collection of bits and pieces for the greater good of your notebook, smartphone, and tablet the first time you plug them in! You’ll have wallpapers for your machines that tip the greatness of the drive itself, icons so you can be sure you’re seeing the right monster, and icons for the rest of your folders if you like as well. It’s all lit up real cool – and each of them will only cost you a cool $24.94 for starters.

Be sure you’re picking up your Big Toe today or be forever mournful: there’s only 2000 of these limited-edition oddities in the world! Have a peek at the rest of our Mimoco coverage in the timeline below, and be sure to let us know if you’re a proud owner of a MIMOBOT or six already!

MIMOBOTs go massive with Uglydoll Flash Drive family expansion is written by Chris Burns & originally posted on SlashGear.
© 2005 – 2012, SlashGear. All right reserved.