Hasta La Gadget!

Taken a look at our AllJoyn hands-on here at Mobile World Congress? You should, and then pick up here. Back? Good. Qualcomm’s FlashLinq is a quasi-extension of AllJoyn, but unlike the latter, this is a proprietary solution that actually requires Qualcomm hardware to run (for now anyway; licensing deals could be in the works). Basically, this wireless technology allows FlashLinq-enabled devices to sense up to 4,000 other FlashLinq devices within a radius of up to 1km, which puts things like WiFi and Bluetooth to shame. Of course, that’s under “ideal” circumstances, but even in subpar situations, the range should still beat out existing short-range alternatives. Why develop a solution like this? For one, businesses will be all over it; imagine a Yelp! instance that specifically hones in on businesses that have a FlashLinq-enabled device in their store, which is advertising deals for those who stop in and mention that FlashLinq sent ’em. Secondly, social networking / Latitude addicts will be head over heels for something like this. Once a connection is made, there’s a steady 15Mbps beam available between the users — that’s more than enough for videochats, media streaming and multiplayer gaming.

The major difference between this and WiFi (aside from the range) is that unlike WiFi — which operates in unlicensed spectrum — FlashLinq requires licensed 5MHz TDD spectrum. That enables control over interference, which in turns boosts range and device density. Moreover, this system uses dramatically less power than BT or WiFi to sense other devices — you’re only using power for discovery two percent of the time, we’re told. Beyond that, a lot remains up in the air. The company is still hammering out which chips will ship with FlashLinq support, and it’ll be waiting for results from its SK Telecom trial (which starts in April) before committing to a commercialization date. Sadly, none of this can be retrofitted into older devices, but the good news is that it’s hardly limited to mobiles. FlashLinq-enabled televisions, laptops, in-car infotainment systems, etc. could all be used to create a discoverable network of interactive goodness, but of course, it’s hard to say how much success Qualcomm will have in a world already loaded down with connectivity options. The technology itself is fairly fascinating, though, as is the social networking demonstration that’s embedded just past the break. Hop on down and mash play, won’t you?

Continue reading Qualcomm’s FlashLinq long-range peer-to-peer communications tech demoed at MWC (video)

Qualcomm’s FlashLinq long-range peer-to-peer communications tech demoed at MWC (video) originally appeared on Engadget on Wed, 16 Feb 2011 19:17:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Consider it a mystery solved. Throughout the week here in Barcelona, we’ve spent an inordinate amount of time chasing down suits from LG, Qualcomm, NVIDIA and Verizon Wireless to answer one simple question: “What’s up with the processor in the Revolution?” If you’ll recall, NVIDIA actually sent one of its own to Verizon’s LTE press event at CES 2011, specifically to bust out a Revolution and gloat about the Tegra 2 chip within (video’s after the break if you don’t believe us). As it stood, it seemed as if the Thunderbolt and Revolution would be butting heads from a CPU standpoint, with the former definitively sporting a 1GHz Qualcomm Snapdragon MSM8655. And then, came the confusion. We showed up at Qualcomm’s booth here at Mobile World Congress to see which phone it was using to demonstrate the recently unveiled Netflix-on-Android support — lo and behold, LG’s Revolution was the handset of choice. Obviously, there had to be a new Snapdragon processor within, as only the newest of the new will have the necessary DRM libraries at a hardware level that are necessary to pass muster with the MPAA.

After venturing over to LG’s booth, we were also able to confirm that the only Revolution it knew of was boasting a Qualcomm CPU, and the shot above (which was sourced from there) proves it. We also confirmed with Verizon Wireless’ paperwork that the version it’s expecting in the next month or so will ship with Qualcomm inside. Finally, NVIDIA refused to comment on the matter, simply suggesting that we contact LG for more details. Put all of that together, and we’re able to come to two main conclusions. First off, it seems as if LG yanked support for the Tegra 2 at some point between CES and MWC — right around four weeks. Hard to say if there were reliability issues, an unsatisfactory amount of power drain, or just irreconcilable differences between the two CEOs (joking, of course). Secondly, it’s reasonably safe to assume that Verizon’s Revolution will be the first Android handset on Big Red to stream Netflix directly, which may please those who were planning on buying one but weren’t looking forward to going without Netflix thanks to the Tegra 2 that was (presumably) slated for inclusion. Qualcomm 1, NVIDIA 0.

Update: NVIDIA finally saw fit to drop us a line and clarify a bit. Turns out, the confirmation in the video below was a gaff to begin with, as the Revolution was never going to be outfitted with NVIDIA innards. Go figure, right?

Vlad Savov contributed to this report.

Continue reading LG Revolution using 1GHz Snapdragon MSM8655, not NVIDIA’s Tegra 2

LG Revolution using 1GHz Snapdragon MSM8655, not NVIDIA’s Tegra 2 originally appeared on Engadget on Wed, 16 Feb 2011 10:17:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Well, well — what have we here? That up above is LG’s Revolution, a Snapdragon-powered Android superphone. What’s inside is no normal Snapdragon, though. It’s actually a newfangled chip that isn’t shipping to consumers just yet, which includes DRM libraries at a hardware level that serve to satisfy paranoid movie execs. The good news is that Qualcomm has actually whipped up a solution that’ll finally bring Watch Instantly to Android; the bad news is that existing smartphones — even existing Snapdragon devices — will not be able to utilize the app. Without new hardware, the Android version of the Netflix app simply won’t function, and no one at Qualcomm was willing to tell us when these Netflix-friendly Snapdragon chips would begin to ship out.

Whenever that fateful day arrives, though, Snapdragon devices with HDMI sockets will be able to beam that content right to their HDTV — the company’s hardware is HDCP-approved, so there’s no sweat when it comes to watching content on the big screen. On-site representatives made clear that both the phone and the app were for demonstration purposes only, but we’d be shocked if LG’s handset shipped without this compatibility. The demo we saw was smooth as butter, and the app itself looked glorious on the Revolution’s 4.3-inch touchscreen. See for yourself in the video just past the break.

Continue reading Android-powered LG Revolution caught streaming Netflix at MWC (video)

Android-powered LG Revolution caught streaming Netflix at MWC (video) originally appeared on Engadget on Tue, 15 Feb 2011 07:53:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Qualcomm just refined the term “blowout” here at Mobile World Congress. It’s obviously a critical show for the wireless supplier, and while the 2.5GHz Snapdragon CPU is the undisputed highlight, there’s quite a bit of chipset action worth paying attention to if you’d prefer that your next handset / mobile hotspot be capable of handling the world’s most advanced network technologies. First off, there’s the Gobi3000 modules, which Qualcomm just announced were shipping en masse. Compared to the Gobi2000 that has been infiltrating laptops and MiFi devices for the past year, this one doubles the HSPA downlink speed and enhances the Gobi common application programming interface (API) functionality for enterprise applications. The design supports single-mode (UMTS) and multi-mode designs (CDMA / UMTS), and should be popping up soon in devices from Huawei, Novatel Wireless, Option, Sierra Wireless and ZTE.

Next up are the MDM9625 and MDM9225 chipsets, which are designed to support LTE data rates as high as 150Mbps within mobile broadband devices. These guys are fabricated using the 28nm technology node, and are backwards compatible with previous generations of LTE and other wireless broadband standards, giving consumers using USB modems powered by the MDM9625 or MDM9225 chipsets an uninterrupted broadband data connection on nearly any network around the world. These are being launched alongside the MDM9615 and MDM8215, which are similar chips designed to support multi-mode LTE and dual-carrier HSPA+, respectively. As for the MDM8225? That’s being released today to support HSPA+ Release 9 (the latest version, obviously), which will support 84Mbps on the downslope (not to mention dual-carrier HSUPA operation) and should fit into at least a couple of T-Mobile USA devices by 2012. Finally, Qualcomm has nailed down a deal that’ll enable all future Snapdragon-powered Android devices to “have access to instant streaming of TV shows and movies from Netflix.” Just sounds like a pre-loaded installation to us, but hey, we’ll take all the optimization we can get when it comes to streaming video on the mobile.

Qualcomm ships dual-mode Gobi3000 WWAN chip, intros LTE / HSPA+ chipsets galore originally appeared on Engadget on Mon, 14 Feb 2011 07:35:00 EDT. Please see our terms for use of feeds.

Permalink   |  Qualcomm (1), (2), (3), (4), (5)  | Email this | Comments

HP already put out the first official word about Qualcomm’s new Snapdragon APQ8060 processor yesterday when it revealed that its TouchPad was based on it, but Qualcomm’s now also come out and properly announced the new processor itself. That’s, of course, a dual-core processor, and comes paired with an Adreno 220 GPU that Qualcomm says helps to deliver “unprecedented processing and 3D graphics performance.” What’s more, while the TouchPad is the first device to use the processor, it obviously won’t be the last, and Qualcomm has now also given us an idea of what sort of capabilities those devices (including smartphones in addition to tablets) might have — namely, cameras up to 16 megapixels, and the ability to capture and display 1080p stereoscopic 3D video or 8 megapixel stereoscopic still images. Head on past the break for the complete press release.

Continue reading Qualcomm gets official with TouchPad-powering Snapdragon APQ8060 processor

Qualcomm gets official with TouchPad-powering Snapdragon APQ8060 processor originally appeared on Engadget on Thu, 10 Feb 2011 13:31:00 EDT. Please see our terms for use of feeds.

Permalink   |  Qualcomm  | Email this | Comments