Hasta La Gadget!

Do you remember the Nintendo Family Computer, or Famicon? Well, you might not — it came to earth in 1983 and was Japan’s version of the NES. Now, continuing its week of vintage teardowns, iFixit’s gotten its hands on one of these colorful gems and done what it does. The Famicon is pretty easily dismantled, and simple inside, as well. As you can see, there’s almost nothing going on in there! There’s one more photo below, but hit up the source link for the full set.

Continue reading iFixit tears apart the Nintendo Famicon

iFixit tears apart the Nintendo Famicon originally appeared on Engadget on Thu, 02 Sep 2010 14:04:00 EDT. Please see our terms for use of feeds.

Permalink   |  iFixit  | Email this | Comments

We’re not quite sure when the Federal Communications Commission got into the habit of tearing devices limb from limb after testing their wireless radiation levels, but we have to say we’re loving the trend — and there’s quite nothing like peering into the juicy innards of a new Apple device. Here, the FCC got its greasy paws on the new Retina Display-packing iPod touch, aka “Apple A1367,” and in the gallery below you can see exactly where Cupertino keeps that A4 processor, 3.44 watt-hour battery, internal antenna, and 802.11 b/g/n 2.4GHz WiFi.

FCC tears apart the new iPod touch, while iFixit wistfully looks on originally appeared on Engadget on Wed, 01 Sep 2010 20:25:00 EDT. Please see our terms for use of feeds.

Permalink   |  FCC  | Email this | Comments

Dell’s Android-powered Streak is an intriguing device. Billed as a tablet but priced and sold like a phone, the Streak has more in common with the HTC Evo and Droid X than it does with the iPad.

Teardown specialists iFixit decided to drill into the Streak to see what its internals look like.

Dell has designed the device so that a mechanical engineering degree is not required for a successful disassembly, says iFixit, which was able to reverse engineer the assembly process within minutes.

The Streak’s 5-inch LCD screen has a layer called ‘Gorilla Glass’ on top that is scratch resistant and durable. The LCD is bonded to the front panel glass to increase the strength of the device, as well as the sensitivity of the capacitive touch panel. But that is also likely to increase the cost of fixing the device if you break just the glass.

The front panel’s construction means the device should be able to withstand drops from above waist height, says iFixit.

The 1530 mAh battery on the Streak is easily replaceable and is covered with a sheet of steel, rather than plastic, to decrease its overall thickness.

Streak has a second 2 GB microSD card near the top of the motherboard that holds system and applications files.

The “C”-shaped motherboard of the device comes out easily after disconnecting some cables, says iFixit, and all components are attached to this motherboard.

Overall, the Streak rates high for the ease with which its battery can be replaced and the use of standard connectors for the cables.

But the rear panel feels cheap, says iFixit, and deforms easily. That’s disappointing for a device that costs nearly $600.

Story continues.

It’s been less than a full day since Verizon’s Droid 2 hit shelves (or two, if you count Sam’s Club) but the fine folks at iFixit have already managed to make their phone explode into… 24 pieces, if we’re counting right. Amazingly enough, the internal construction is almost exactly the same despite Motorola’s near-doubling of the horsepower (and addition of 802.11n) inside. You’ll find a nigh-identical logic board, speaker, camera and LCD screen — not to mention the exact same battery, which means original Droid owners will have a handy swap — and what looks like the exact same steps (but Torx screwdrivers required) to take the clever puzzle of plastic and metal apart. Not that you’d necessarily want to do the same to your new handset — It’s days like this we’re glad iFixit is here to take that bullet for us.

Motorola Droid 2 ripped to shreds, where’s an astromech when you need one? originally appeared on Engadget on Thu, 12 Aug 2010 21:31:00 EDT. Please see our terms for use of feeds.

Permalink   |  iFixit  | Email this | Comments

Tease as much as you want, Sony, but things get real serious when you flip to the other side and look at the magic behind Microsoft’s Kinect camera. Recently, T3 was able to get behind the scenes for a quick lesson on how this Xbox 360 peripheral works, and as part of the tour, it also saw the innocent sensor sitting bare naked in the lab. As pictured above, this little device actually has a lot to pack in — namely a RGB camera for facial recognition plus video capturing, a depth sensor (an infrared projector paired with a monochrome CMOS camera) for movement tracking, four downward-facing mics for voice recognition, a quiet motor in the bulky base for rotation, and all the circuitry components to link them up. Head over to the source link for a detailed briefing — but we all know you’re just gonna go straight to the gallery of Redmond’s naughty pics.

Microsoft pulls apart a Kinect camera, tickles your non-gaming fetish originally appeared on Engadget on Sat, 07 Aug 2010 15:41:00 EDT. Please see our terms for use of feeds.

Permalink SlashGear  |  T3  | Email this | Comments