World’s smallest Donkey Kong cabinet delivers authentic arcade experience for tiny fingers (video)

Tiny Donkey Kong Cab

This, friends, is a work of art. Above is a stunning, fully-functional recreation of the original Donkey Kong arcade cabinet — and it’s only 8.25 inches tall. The accomplished modder Bender posted his handiwork on the Build Your Own Arcade Controls Forum and it’s sure to wow even the most cynical of folks. At the heart of this build is a hacked up GamePark GP2X Wiz running MAME, but it’s the attention to detail, including the printed vinyl decals and light-up marquee, that really pull this (supposedly world’s smallest) 1/8 scale project together. Check out the gallery below and the pair of lengthy demo videos after the break. En garde Mr. Heck!

[Thanks, Brian]

Continue reading World’s smallest Donkey Kong cabinet delivers authentic arcade experience for tiny fingers (video)

World’s smallest Donkey Kong cabinet delivers authentic arcade experience for tiny fingers (video) originally appeared on Engadget on Wed, 04 May 2011 15:37:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceBuild Your Own Arcade Controls  | Email this | Comments

What the universe looked like 11 billion years ago

Travel back in time with one of the largest 3D maps of our universe ever created.

Nissan NV200 van named NYC’s ‘Taxi of Tomorrow,’ Travis Bickle cringes (video)

New Yorkers, this is your “Taxi of Tomorrow.” After two years of deliberation, Nissan’s NV200 was chosen as the city’s exclusive taxi yesterday, edging out models from Ford Motor Co. and Turkish manufacturer Karsan. The four-passenger van is slated to hit New York’s streets in late 2013, after which it will be gradually phased in on a more widespread basis. With a manufacturer suggested retail price of around $29,000, the commodious NV200 boasts a 2.0L 4-cylinder powertrain, transparent roof panel, driver navigation system, overhead reading lights and a mobile charging unit, replete with a 12V outlet and two USB ports. Nissan also placed an emphasis on passenger and pedestrian safety, with front and rear-seat curtain airbags, standard traction control and an external lighting system designed to alert others when the NV200’s doors are opening. The van’s microbial seat fabric should help assuage the fears of many germophobes, while its “low-annoyance” horn promises to put a (probably miniscule) dent in the city’s noise pollution. Mayor Bloomberg definitely won’t realize his all-hybrid dreams by 2012, but Nissan has agreed to participate in a forthcoming EV pilot program, involving up to six of the company’s electric LEAFs. Until then, New Yorkers will have plenty of time to get used to the city’s new soccer mom approach to taxi transport. Cruise past the break for full PR and video.

Continue reading Nissan NV200 van named NYC’s ‘Taxi of Tomorrow,’ Travis Bickle cringes (video)

Nissan NV200 van named NYC’s ‘Taxi of Tomorrow,’ Travis Bickle cringes (video) originally appeared on Engadget on Wed, 04 May 2011 15:18:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourcePR Newswire  | Email this | Comments

CyberNotes: Offertrax Links Merchants & Shoppers Via RSS

This article was written on November 10, 2006 by CyberNet.

CyberNotes
Free For All Friday

Offertrax is off and running with their free public beta! We last wrote about Offertrax back in July when they were preparing themselves for this beta launch.  If you are a merchant and you’d like to get in on what Offertrax has to offer, do it now!  Offertrax will always be free for shoppers, but will only remain a free beta for merchants until the end of January.

So, how does it all work and what is it? As many web 2.0 start-ups are doing, Offertrax relies on RSS (Really Simple Syndication). Their goal is to use RSS to connect merchants with shoppers who are looking for information about sales, inventory, etc.  The entire process is meant to simplify shopping in all forms. Consumers are able to control how they want to be alerted by merchants when items that interest them appear.

I just signed up for an account as a shopper, and it only takes a minute and requires minimal information. Before I got started, I had to install a browser button which then enabled me to add items to a track. The first item I that I decided to “track” was a Canon Digital Rebel XTi10 SLR Camera. I found the item at Amazon, and then clicked the “Track This Offer” bookmarklet.  From there, I selected an image for my product and then added it to a new track titled “Digital SLR Cameras.” The title of your track will typically cover the area you’re looking for.

From there, it adds the new product to my list! Now Offertrax will revisit the site every hour to look for changes. This could be a HUGE time saver for anyone who is price shopping and looking for the best deal. As a potential customer, I can post notes and reviews  that would be made available to others who are searching for the same product.  They refer to track as a “container that can hold as many products as you want.” 

Because I just signed up for an account, I have yet to see how the alert system will work when something has changed with the item.  I’m excited to see how this all works, especially with the holiday season right around the corner! If you’d like to sign up for an account, go to www.offertrax.com to get started.  They also have a blog you can view for more information and updates.

Copyright © 2011 CyberNetNews.com

Related Posts:


Sleek, flat microscope could detect skin cancer

Fraunhofer Institute unveils microscope that turns traditional scanning approach on head, using several tiny lenses to simultaneously scan one image instead of one lens to scan many.

Originally posted at News – Health Tech

The 404 813: Where our pets’ heads are falling off (podcast)


The listeners in the chat room this morning want us wish you a happy Star Wars Day, but we’re pretty sure we’ll get beaten up for saying something like that. Instead, we’re taking taking our anger out on Wilson’s floating head in the studio, dodging blueberries and corn from our neighbors in New Jersey, and, of course, bringing you silly tech stories of the day.

The 404 Digest for Episode 813

Ep. 813: Where our pets’ heads are falling off



Episode 813

Listen now:

Download today’s podcast

Subscribe in iTunes (audio) | Subscribe in iTunes (video) | Subscribe in RSS Audio | Subscribe in RSS Video



 



Originally posted at The 404 Podcast

Intel Debuts First 3-D Transistor for New ‘Ivy Bridge’ Chip

Intel's new 3-D processor, codenamed "Ivy Gate" (right), and one of the previous generation of transistors (left). Photo courtesy Intel

Intel has announced the world’s first 3-D microprocessor transistor for mass production.

It’s a major breakthrough for the semiconductor industry, which has been trying for years to get the microscopic semiconductor structures that make up computer chips into the third dimension.

“This transition to 3-D devices will help us continue Moore’s Law,” said Intel senior fellow Mark Bohr at the news conference Wednesday. “Clearly you can pack more things into a small space if you go vertical with 3-D.”

The Tri-Gate 3-D transistors will be put onto a new line of Intel chips. Dubbed “Ivy Bridge,” the chips are the world’s first mass-produced 22-nanometer microprocessors, which means they also contain the smallest semiconductors yet available on a production chip.

The creation of the 3-D transistor is a major advancement in chip manufacturing. Instead of the power-conducting channel occurring on a 2-D surface as with existing transistors, it is replaced with a thin silicon fin that rises vertically from the silicon of the transistor.

Current control is then gated on each of the fin’s three sides on a 3-D transistor, rather than just on the top side, as happens in the current generation of planar, or 2-D, transistors.

Essentially, that means as much current flowing as possible when transistors are in the “on” state, increasing performance by as much as 30 percent compared to the current planar transistors. Alternately, when the transistor is in its “off” state, the flow will be as close to zero as possible, with lower leakage than before. This lower leakage means minimizing power usage.

In other words, the new line of processors will be smaller, faster and perform at a lower voltage with less power leakage than before.

Enhanced view of Intel’s Tri-Gate 3-D transistor. Photo courtesy Intel

“It’s the first change in transistor structure since 1958, when Robert Noyce invented the first planar IC,” said Dan Hutcheson, an analyst at VLSI Research. “Over the past 10 years, all we’ve done is shrink the chips. But it’s been growing more and more difficult to do so without actually changing the transistor itself.”

Also, more transistors are able to be fit on the Ivy Bridge processors, using the company’s 22-nanometer manufacturing process. Bohr said the new chips have twice the transistor density of the previous generation of 32-nanometer chips.

“Because they’ve made this shift, they have the power equivalence of about two nodes in one,” Hutcheson said.

While most microprocessors contain many vertical layers of circuitry (the wiring that connects the chips’ billions of transistors) the transistors have been confined to the bottom layer of the chip. That’s because the etching technology used to create semiconductors is destructive, so you can’t create multiple layers — or 3-D structures — without destroying the underlying layers.

Intel claimed only a 2-to-3-percent cost increase from the previous generation of planar transistors.

The company will be making upgrades to its factories over 2011 and 2012 in order to manufacture the new transistors. The technology should be expected to be in full production by the end of this year.

When asked, company spokesmen wouldn’t say when we would see 3-D transistors in smartphones and tablets, but acknowledged the company has a date in mind.

While this is a major announcement for the firm, Intel’s year hasn’t been without its problems. The company revealed in February that a supporting chip in one of its “Sandy Bridge” line of processors, codenamed “Cougar Point,” contained a manufacturing flaw. After shipping approximately 8 million of the bad chips, the subsequent recall cost the company an estimated $1 billion in the first quarter of 2011, after calculating for lost revenues and replacement costs.

But Intel has fared better this week. Apple announced its refreshed line of iMacs on Tuesday. They’re powered by Intel’s “Sandy Bridge” i5 and i7 processors. Early benchmarks show extremely speedy results.

With the development of the Tri-Gate transistor, Bohr estimates that Intel is definitely going to stay competitive with its rival, ARM Holdings.

“It doesn’t mean that ARM is going to roll over and die,” Hutcheson said. “But it’s not going to have the advantage in low-power consumption like it used to.”


Intel Debuts World’s First 3-D Transistor For New ‘Ivy Bridge’ Chip

On the right is Intel's new 3-D processor, codenamed "Ivy Gate." The left shows one of the previous generation of transistors. Photo courtesy of Intel

Intel has announced the world’s first 3-D microprocessor transistor.

It’s a major breakthrough for the semiconductor industry, which has been trying for years to get the microscopic semiconductor structures that make up computer chips into the third dimension.

“This transition to 3-D devices will help us continue to Moore’s Law,” said Intel senior fellow Mark Bohr at the press conference on Wednesday. “Clearly you can pack more things into a small space if you go vertical with 3-D.”

The Tri-Gate 3-D transistors will be put onto a new line of Intel chips. Dubbed “Ivy Bridge,” the chips are the world’s first 22-nanometer microprocessors, which means they also contain the smallest semiconductors yet available on a production chip.

The creation of the 3-D transistor is a major advancement in chip manufacturing. Instead of the power-conducting channel occurring on a 2-D surface as with existing transistors, it is replaced with a thin silicon fin that rises vertically from the silicon of the transistor.

Current control is then gated on each of the fin’s three sides on a 3-D transistor, rather than just on the top side, as happens in the current generation of planar, or 2-D, transistors.

Essentially, that means as much current flowing as possible when transistors are in the “on” state, increasing performance by as much as 30% compared to the current planar transistors. Alternately, when the transistor is in its “off” state, the flow will be as close to zero as possible, with lower leakage than before. This lower leakage means minimizing power usage.

In other words, the new line of processors will be smaller, faster and perform at a lower voltage with less power leakage than before.

An enhanced view of Intel’s Tri-Gate 3-D transistor. Photo courtesy of Intel

“It’s the first change in transistor structure since 1958, when Robert Noyce invented the first planar IC,” said Dan Hutcheson, an analyst at VLSI Research. “Over the past 10 years, all we’ve done is shrink the chips. But it’s been growing more and more difficult to do so without actually changing the transistor itself.”

Also, more transistors are able to be fit on the Ivy Bridge processors, using the company’s 22-nanometer manufacturing process. Bohr said the new chips have twice the transistor density of the previous generation of 32-nanometer chips.

“Because they’ve made this shift, they have the power equivalence of about two nodes in one,” Hutcheson said.

While most microprocessors contain many vertical layers of circuitry (the wiring that connects the chips billions of transistors) the transistors have been confined to the bottom layer of the chip. That’s because the etching technology used to create semiconductors is destructive, so you can’t create multiple layers — or 3-D structures — without destroying the underlying layers.

Intel claimed only a two- to three-percent cost increase from the previous generation of planar transistors.

The company will be making upgrades to its factories over 2011 and 2012 in order to manufacture the new transistors. The technology should be expected to be in full production by the end of this year.

When asked, the company wouldn’t say when we would see 3-D transistors in smartphones and tablets, although it did have a date in mind.

While this is a major announcement for the company, Intel’s year hasn’t been without its problems. In February, the company revealed that a supporting chip in one of its “Sandy Bridge” line of processors, codenamed “Cougar Point,” contained a manufacturing flaw. After shipping approximately 8 million of the bad chips, the subsequent recall cost the company an estimated $1 billion net loss for the first quarter of 2011, after calculating for lost revenues and replacement costs.

But Intel has fared better this week. On Tuesday, Apple announced its refreshed line of iMacs, which are powered by Intel’s “Sandy Bridge” i5 and i7 processors. Early benchmarks show extremely speedy results.

With the development of the Tri-Gate transistor, Bohr estimates that Intel is definitely going to stay competitive with rival manufacturer ARM Holdings.

“It doesn’t mean that ARM is going to roll over and die,” Hutcheson said. “But it’s not going to have the advantage in low-power consumption like it used to.”


Gearlog: Turning a Page

Change is coming…for Gearlog…and for me. As it turns out, it’s time for us both to move on.

Gearlog was born in August of 2005. Even five and a half years ago, the world of technology blogs was crowded–but Gearlog had a secret weapon. It had PCMag. Early on, the site bore the tagline, “from the editors of PCMag.” It was an outlet for our editors and analysts–a way to keep up with the ever-increasing pace of the Web. It became a destination place for news and rumors and quick opinions written in between the site’s lengthy reviews.

Before sitting down to write this, I went into our content management system to pin point the site’s precise birthday. I found a post written on August 9th, 2006–about 15 months before I started at PCMag–titled “Snappy New Ultralight Tablet From Toshiba.” No mission statement or “welcome to Gearlog.” The site and its editors hit the ground running, and they haven’t looked back.

And, like the Web around it, Gearlog has proven itself a constantly evolving creature, spawning newsletters and a podcast, and surviving a number of personnel changes–including its largest shift, which occurred in the summer of last year, when the site’s long-time editor Carol Mangis left Ziff (no discussion of Gearlog’s history would be complete without mentioning the tremendous amount of time Carol put into the site).

Carol’s departure and new ownership meant more changes for Gearlog, and I was asked to take the helm. And as it had in the beginning, the site hit the ground running once again. Gearlog shifted focus under my reign, taking a more newsy approach to the tech world. We brought new writers and plenty of new readers on board.

When the company’s new owners took over, they stressed acquisitions as one of the company’s primary goals, and in January, PCMag purchased Geek.com, a much beloved and widely read news blog. That acquisition, it turned out, would prove the next step in Gearlog’s evolution. Tomorrow, Gearlog will become a part of Geek.com. All of the content we’ve produced for the site over the years will live on under the Geek umbrella, and the Gearlog URL will redirect to that site.

A number of your favorite Gearlog writers will make the transition as well. In fact, if you already read Geek on a regular basis, you’ve likely noticed that a few already have.

I, on the other hand, will not be making the move. In fact, by the time this posts, I will already be at my new gig at Engadget.com.

I’ll spare you the laundry list of thank yous–which would obviously include all of the writers, PCMag editors, and people who have kept the site running on the backend. But four people certainly warrant a quick mention in this paragraph. Carol, of course, for the reasons mentioned above. Lance Ulanoff and Vicki Jacobson, PCMag’s editor-in-chief and director of online content, respectively, have been tremendously helpful for countless reasons. And Jenny Bergen, who has assisted me with Gearlog these past several months–hers is among the names that will make the transition over to Geek.

And a last bit of self-indulgence: if you’d like to keep up to date with me and my goings on, please follow me on Twitter–I’m @bheater. In the meantime, I’ll see you around the blogosphere.

–Brian Heater

Shocker! College kids like having iPads in the classroom

E-readers may not be good enough for Princeton’s hallowed halls, but students and professors at Oklahoma State University seem to have fallen head over heels for their iPads. Last fall, the school introduced the tablets in a handful of lecture halls and classrooms, as part of its iPad Pilot Program. Teachers involved in the study said they benefited from all the educational software available on Apple’s App Store, while students appreciated not having to spend their life savings on traditional textbooks. At the end of the pilot program, a full 75-percent of collegians said the iPad “greatly enhanced” their classroom experience, though we’re guessing that much of that enhancement came from their newfound ability to check TweetDeck between lecture notes. Opinion was noticeably more divided, however, on the device’s value as an e-reader. Some enjoyed having all their books in one place, whereas others were a bit disappointed with the experience, saying they didn’t use it to read as often as they expected to. Our former undergrad-slacker selves can totally relate. Video and PR await you, after the break.

Continue reading Shocker! College kids like having iPads in the classroom

Shocker! College kids like having iPads in the classroom originally appeared on Engadget on Wed, 04 May 2011 14:54:00 EDT. Please see our terms for use of feeds.

Permalink MacNews  |  sourceBusinessWire  | Email this | Comments