Hasta La Gadget!

Judging by the fact that our lovely planet is home to the Libretto W100, the Kno, Onkyo DX and oodles of prototypes that utilize twin panels rather than a panel and a keyboard, Sharp’s newest microchip is likely to draw some serious industry attention. Improving on an idea that began in 2008, the company has recently shown off a new chip (dubbed LR388G9) that can control two mobile LCDs and can simultaneously display a pair of different 1,024 x 480 pixel clips on a pair of screens; moreover, it can output full 1080p to any source connected via HDMI. Since ’08, Sharp has increased memory capacity from 16Mbits to 32Mbits while boosting the image processing speed, and the company now intends to hawk this new guy to outfits who manufacture smartphones, e-readers, digital photo frames and even netbooks. If all goes well, the chip will ship within a 261-pin WFBGA package this September, with volume pricing pegged at around ¥2,400 ($27).

Sharp microchip enables dual-screen smartphones, e-readers and netbooks originally appeared on Engadget on Wed, 28 Jul 2010 06:24:00 EDT. Please see our terms for use of feeds.

Permalink   |  Tech-On  | Email this | Comments

Ready to climb Mount Fuji and see what the next top Japanese TV will look like? Toshiba has just outed its trio of flag-bearing displays for this fall: the Cell Regza Slim 55XE2 and 46XE2, and the full-bloodied 55X2. Inch-based dimensions are already given in their model names, but you’ll also want to know they offer 240Hz refresh rates, 1,000 nits of brightness and 9,000,000:1 dynamic contrast ratios on the chunkier X2 (augmented with local backlight dimming), and a 2D-to-3D conversion technology that’ll translate your stale old 2D imagery into bodacious triple dimensionality. You’re also keeping the 3 terabytes of storage and the capability of time-shifting up to eight channels at a time from the older model, though you’re no longer limited to a hard cap of 26 hours per channel. Connectivity is also rich, with options for DLNA and/or up to eight HDDs, while jacking in a Blu-ray recorder will permit you to record straight to the optical media the same way you can do to the Regzas’ own storage. All these goodies won’t come cheap, however, as the flagship 55X2 will retail for a well-rounded million Yen ($11,430) in late October, to be preceded by its Slim siblings with prices of ¥700,000 ($8,000) for the 55-inch and ¥600,000 ($6,858) for the 46-inch earlier that month. Full press release after the break.

Continue reading Toshiba’s latest Cell Regza LCDs are Slim, but don’t go calling them 2D

Toshiba’s latest Cell Regza LCDs are Slim, but don’t go calling them 2D originally appeared on Engadget on Wed, 28 Jul 2010 02:58:00 EDT. Please see our terms for use of feeds.

Permalink Engadget Japanese  |   | Email this | Comments

Fans of Acer’s affordable, high-quality LCD displays have some new additions to the company’s lineup to be happy about this week: Acer unveiled three new super-thin LCD displays in 20, 21.5, and 23-inch models. The displays are part of Acer’s new S1 series of panels, and all of them are LED backlit and Energy Star 5.0 compliant so you don’t need to worry that your new monitor is sucking down power. The 23-inch model even supports HDMI in addition to VGA and DVI for consoles, Blu-Ray players, and other video devices. The 20 display is the thinnest, coming in at 13mm from front to back, and the 21.5 and 23-inch models are only a hair thicker at 15mm.

If you’re looking for a monitor upgrade but don’t want to spend a lot of cash, Acer claims the new S1 displays will be available by the end of July. The 20-inch model will cost $169.99, the 21.5-inch model will be $219.99, and you’ll need $269.99 list for the 23-inch display.

To cut a long story short, Onkyo’s LPF10M01 is basically a netbook’s screen sans (most of) the netbook. 10.1 inches of LED-backlit LCD get covered in a 1,024 x 600 pixel array and are backed up by 250 nits of brightness and a 500 to 1 contrast ratio. The big selling point here is the inclusion of an HDMI input — still something of a rarity in picture frames — which sidles up alongside a USB port, SDHC and Memory Stick card reader, and 512MB of integrated memory. We’re fancying the flexibility of using it as a secondary display or as part of some truly minimalist desktop environment, but doubt many will be won over by the austere 140 degree horizontal viewing angle, which narrow down to a zany 110 on the vertical axis. Anyhow, it launches on August 6 in Japan for around ¥19,800 ($227).

Onkyo busts out HDMI-connected 10.1-inch picture frame originally appeared on Engadget on Thu, 22 Jul 2010 05:22:00 EDT. Please see our terms for use of feeds.

Permalink PC Watch Impress  |  Onkyo  | Email this | Comments

It’s hard to believe that it’s been almost two and a half years since Pixel Qi spun off from OLPC and promised to bring its dual-mode, power efficient display to laptops, tablets, and e-readers. For those who haven’t followed our small obsession with the 3Qi screen technology (shame on you!) it promises the best of both worlds: full-color graphics in a normal LCD mode, but also the ability to turn off the backlight to morph into a grayscale, e-paper like display. And while we’ve seen it demoed at tradeshows (and more tradeshows!), we haven’t been able to get our own grubby hands on the much-lauded display. Until now, of course.

No, the 3Qi display still isn’t shipping in any commercially available products, but Pixel Qi is at long last offering a $275 10.1-inch screen replacement kit for netbooks through MakerShed. Needless to say, we jumped — nay, leaped — at the chance to finally get the display into our laboratories, roll up our sleeves and get to crankin’. That’s right, we got out the screwdriver, wrangled up an old Lenovo IdeaPad S10-2 netbook and swapped in the 3Qi display for Lenovo’s glossy panel. You’re surely sitting on a metric ton of questions. Was it hard to swap out? Has the screen been everything we’ve ever fantasized about and more? Is it really 80 percent more power efficient than standard LCDs? We’ve got plenty of answers as well as a step-by-step how-to after the break.

Continue reading How-to: install Pixel Qi’s 3Qi display on your netbook (and why it’s worth it)

How-to: install Pixel Qi’s 3Qi display on your netbook (and why it’s worth it) originally appeared on Engadget on Mon, 19 Jul 2010 13:35:00 EDT. Please see our terms for use of feeds.

Permalink   |  MakerShed  | Email this | Comments