DIY unmanned airship soars 95,000 feet above Earth, lays claim to new record (video)

Are you entertaining dreams of launching your own private spacecraft? All you need is about 30 grand in your bank account, and lots of spare time. Last weekend, a company called JP Aerospace sent its unmanned Tandem airship 95,085 feet above the ground — a height that, according to the company, establishes a new record for remotely controlled airships. In fact, JP Aerospace says this altitude is a full four miles higher than any other airship has ever flown. To pull this off, the team strapped its 30-foot-long aircraft with two balloons, and packed it with a pair of electric motors that manipulated the Tandem’s specially designed propellers. It’s a relatively simple method, and one that didn’t exactly break the bank, either. All told, it took about five years and some $30,000 to launch the aircraft, as part of the company’s Airship to Orbit project. The long-term goal is to use the Tandem or similar airships as a launch pad for rockets or other interstellar aircraft. No word yet on when that could happen, but you can float past the break for a brief video on the Tandem, coupled with a brief PR.

Continue reading DIY unmanned airship soars 95,000 feet above Earth, lays claim to new record (video)

DIY unmanned airship soars 95,000 feet above Earth, lays claim to new record (video) originally appeared on Engadget on Wed, 02 Nov 2011 07:02:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceWired  | Email this | Comments

Tweephone is a rotary phone Twitter client, even your grandma could love

Tweephone

The collectives behind the Tweephone, UP digital Bureau and Unteleported tech agency, claim that it’s the first analog Twitter client. We find that hard to believe but, while we’ve seen rotary phone-based Twitter tools before and analog meters that measure microblogging activity, we couldn’t come up with a single example of a client that lets you punch in messages through non-digital means. Even if it’s not the first of its kind, the Tweephone is still a pretty neat hack. Inside the old-school chassis is the ubiquitous Arduino, which interprets your pulls of the dial as letters. Like a phone with only a dial pad, you’ll have to ring up numbers multiple times to get the right letter (i.e. dial “2” three times to get a “c”). It definitely not the most efficient method for sending out 140-character missives, but certainly one of the more unique. Check out the video after the break to see it in action.

Continue reading Tweephone is a rotary phone Twitter client, even your grandma could love

Tweephone is a rotary phone Twitter client, even your grandma could love originally appeared on Engadget on Tue, 01 Nov 2011 19:04:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceUnteleported, Habrahabr (translated)  | Email this | Comments

DIY wrist-mounted crossbow gets you one step closer to being a super hero (or villain)

DIY Wrist-mounted Crossbow

When it comes to all things DIY we tend to be drawn in by odd, internet-connected esoterica and Arduino-powered beer distributors. But, we won’t lie, nothing gets us going like a home-crafted instrument of destruction. And, in that vein, may we present you with the wrist-mounted crossbow from homebrew weapon artisan Patrick Priebe. Usually Priebe sticks with lasers but, for this project, he went old school — as in medieval. The bolt firing wristband isn’t without its modern accouterments, though — a pair of AA batteries and toggle switch are hidden in the palm which power a laser sight for better targeting. We won’t waste any more of your time, everything you want to see is contained in the video after the break.

Continue reading DIY wrist-mounted crossbow gets you one step closer to being a super hero (or villain)

DIY wrist-mounted crossbow gets you one step closer to being a super hero (or villain) originally appeared on Engadget on Tue, 01 Nov 2011 17:52:00 EDT. Please see our terms for use of feeds.

Permalink Technabob  |  sourcePatrick Priebe (YouTube)  | Email this | Comments

Beeri: Siri’s new best friend cracks open a cold one (video)

Beeri

We already know that Siri can send texts, check the weather or find you a restaurant, but did you know she can also fetch you a beer. Well, sort of… with a little hacking. The folks at Redpepper dreamed up Beeri, an RC truck that cracks open a can of brew whenever it receives a tweet instructing it to “pour.” Since you can text updates to Twitter (40404) and Siri can text, that means it’s perfectly simple to tell Beeri it’s Miller time. Whenever the Arduino embedded in the truck detects a mention with the word “pour,” it drives forward, slamming a beer can into a puncture wall that drips into a funnel, filling a cup beneath the table top. It’s a pretty ingenious system, and you can see it in action after the break. We just hope Beeri has a day job — looking at all that head, it’s clear she wouldn’t last a day as a bartender.

Continue reading Beeri: Siri’s new best friend cracks open a cold one (video)

Beeri: Siri’s new best friend cracks open a cold one (video) originally appeared on Engadget on Fri, 21 Oct 2011 15:39:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceRedpepper  | Email this | Comments

Arduino, iPod and RFID make beautiful, accessible music together (video)

Magic Music Table RFID

There isn’t actually much new about this awesome DIY project, but it’s the way it brings the various parts together that has us impressed. Designed by Instructables user XenonJohn, with help from software developer David Findlay, the Magic Music Table RFID was designed to let a child with a disability select albums to play back from an iPod touch playlist. The iPod is connected to an Arduino, which tells the device to start playing a particular track based on a selection made with RFID cards. The whole setup is built into a coffee table and the RFID tags are sandwiched inside clear plastic blocks with the album art. You can see it in action in the video after the break and, if you’ve got the patience and skill, you can build your own using the directions at the source link.

Continue reading Arduino, iPod and RFID make beautiful, accessible music together (video)

Arduino, iPod and RFID make beautiful, accessible music together (video) originally appeared on Engadget on Wed, 05 Oct 2011 11:12:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Arduino-powered lighting system infuses your LED with some Ambilight-like pizazz (video)

Why spend your hard-earned money on one of Philips’ Ambilight displays when you can just make your own, using some Arduino-based wizardry and a little bit of elbow grease? Fortunately, Minty Boost creator ladyada is here to help. All you’ll need is a strand of digital RGB LED pixels, a five-volt DC power supply (along with a female power adapter), any USB-equipped Arduino micro-controller and, of course, the appropriate Processing programming environment. You can find the full how-to at the source link below, but the results are pretty impressive — a capture-based sketch system that’s compatible with just about any media player. See it for yourself in the video after the break.

[Thanks, Phil]

Continue reading Arduino-powered lighting system infuses your LED with some Ambilight-like pizazz (video)

Arduino-powered lighting system infuses your LED with some Ambilight-like pizazz (video) originally appeared on Engadget on Wed, 05 Oct 2011 06:44:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceLadyada.net  | Email this | Comments

A DIY Arduino watch that’s actually wearable, still won’t win you points with the ladies

Arduino LED Watch

Here’s a little fashion secret: it’s all about the details. Wear cheap square-toe shoes with that $5,000 custom-made suit and people will notice. The same is true of a watch. Your timepiece can say a lot about you, including: “I’m a big nerd, please beat me up and take my lunch money.” So, what does an Arduino watch tell your peers? Well, for one, that you have way too much time on your hands. And two, that you’re crafty person capable of putting your brain meats to work building actual things. Of course, telling time with a series of brightly glowing LEDs on an exposed PCB also sends the message that being fashionable is not your primary concern. If you’re looking to earn some geek cred, and can live with the fact that wearing this will probably cost you that cute girl’s number at the bar, hit up the source for instructions. At least this wearable Arduino timepiece is a slightly less conspicuous than the Steampunk version we saw last summer. One more pic after the break.

Continue reading A DIY Arduino watch that’s actually wearable, still won’t win you points with the ladies

A DIY Arduino watch that’s actually wearable, still won’t win you points with the ladies originally appeared on Engadget on Wed, 28 Sep 2011 14:12:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceInstructables  | Email this | Comments

Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold

Arduino at Maker Faire

When Arduino unveiled a boatload of new products on Friday, we could have taken the easy route, posted the PR and called it a day. But, since the crew happened to be in town for Maker Faire, with a few folks from Atmel (makers of the AVR chip at the heart of the open source MCU) in tow, we figured why not go straight to the source. Arduino founder Massimo Banzi gave us a look at the company’s latest offerings: the ARM-powered Arduino Due, the low-cost Arduino Leonardo, and aptly-named Arduino WiFi, as well as a peek at some of the group’s upcoming plans. Keep on reading after the break for the juicy details.

Continue reading Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold

Arduino brings the (new) goods to Maker Faire New York, welcomes ARM into the fold originally appeared on Engadget on Mon, 19 Sep 2011 09:45:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Real life Minecraft block combines cardboard box, Arduino, and a projector (video)

Real life Minecraft block

You know how when you were a kid, the box something came in was almost as fun as the toy itself? Well, that doesn’t have to change as you get older — provided you’ve retained that creative spark. Ben Purdy apparently kept his imagination nimble and, with the help of a projector, a piezo element and an Arduino (of course), turned a plain ol’ box into a real life Minecraft block. Hit the cube with a stick, or anything really, and the projection-mapped image starts to deteriorate and particles tumble off as you mine it. You won’t actually be able to turn your harvested materials into structures or tools, but it’s still a good idea to keep an eye out for Creepers. Don’t miss the trio of videos after the break.

Continue reading Real life Minecraft block combines cardboard box, Arduino, and a projector (video)

Real life Minecraft block combines cardboard box, Arduino, and a projector (video) originally appeared on Engadget on Mon, 29 Aug 2011 15:41:00 EDT. Please see our terms for use of feeds.

Permalink Kotaku  |  sourceBen Purdy  | Email this | Comments

Ben Heck tackles Android ADK, whips up car trip-simulating baby seat

Ben Heck car seat simulator ADK

We’ve been wondering what would happen if the infinitely resourceful Ben Heck got his hands on the powerful Android ADK. Thankfully, in the most recent episode of the accomplished modder’s show, our curiosity is satiated. The crafty Wisconsinite tackles a reader request — to recreate the soothing motion of a car ride and help put a three-month-old baby to sleep. Mr. Heck uses the accelerometer in his phone to record the bounce and sway from the backseat as he drives around. He then draws up some code that will feed that data to the Arduino-powered ADK and move a series of servos that will tilt and shake a child’s car seat. Sadly, the completion of the project will have to wait till the next exciting episode, but by the end of the installment embedded after the break you do get to see a scale model. What are you waiting for? Click that little read more link for PR and video… you know you want to.

Continue reading Ben Heck tackles Android ADK, whips up car trip-simulating baby seat

Ben Heck tackles Android ADK, whips up car trip-simulating baby seat originally appeared on Engadget on Mon, 22 Aug 2011 23:05:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments