Computer controlled Bayan from 1988 makes us want to go back to the past

Back in 1988, Russian engineer Vladimir Demin combined a bunch of solenoids (loops of copper wire) and a Bayan (a Russian accordian), to create a self-playable instrument controlled by his awesome, self-built computer. Yes, we’re impressed, and you will be too, if you take a look at the video below.

Continue reading Computer controlled Bayan from 1988 makes us want to go back to the past

Computer controlled Bayan from 1988 makes us want to go back to the past originally appeared on Engadget on Mon, 06 Sep 2010 22:41:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceHackADay  | Email this | Comments

Cut-rate, webcam-based 3D scanner coming soon to a MakerBot store near you

3D scanning seems magical enough without bringing things like Lego Mindstorms contraptions into the mix. Now a cat named Andy Barry (a research engineer at NASA Ames Research Laboratory’s Autodesk Innovations Lab) has gone and built one out of a webcam, a laser, and a whole lot of moxie. The premise is pretty straight-forward: a red laser sweeps across an object while the webcam keeps an eye on the beam’s deflection (the more the beam shifts, the closer the object is to the camera). The computer uses this data to calculate the thickness of the object. Sounds like the perfect compliment to your Cupcake 3D printer, eh? With any luck, you should see it at the MakerBot store at around the $200 mark sometime this fall.

Cut-rate, webcam-based 3D scanner coming soon to a MakerBot store near you originally appeared on Engadget on Mon, 09 Aug 2010 11:59:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceWired  | Email this | Comments

DIY tablet kit is less than $400, more complicated than an iPad

Tired of The Man holding you down on the tablet front with his oppressive App Stores, his tyrannical carrier constraints, and other outrageous insults to your civil liberties? Well now you can break free of this stranglehold, thanks to a company called Liquidware and its open source, DIY tablet starter kit. The premise is simple: Liquidware provides a touchscreen OLED display (4.3-inch, 480 x 272, resistive touch), the BeagleBoard guts (a single-board computer driven by a 720MHz ARM Cortex-A8 OMAP3530 CPU, with 2GB of NAND and an SD card slot), and the BeagleJuice battery module, along with an SD card pre-loaded with Angstrom Linux. You put all the pieces together and then just basically go nuts, designing your own application marketplace, infrastructure for direct-to-consumer video and audio sales, and a revolutionary and magical user interface that blurs the lines between waking life and a hallucinatory dream-state where anything is possible, and the only limitation is yourself. Check the Moscone Center’s booking information below to see scheduling availability for your developer conference, and hit the source link to offer up your $393.61 to Liquidware.

DIY tablet kit is less than $400, more complicated than an iPad originally appeared on Engadget on Fri, 18 Jun 2010 14:29:00 EDT. Please see our terms for use of feeds.

Permalink Wired  |  sourceLiquidware  | Email this | Comments

Build Your Own Tablet for $400

If you’re not sold on the iPad and are tired of waiting for tablets from other PC makers to show up, try getting your hands dirty with a tablet you can build on your own.

Liquidware, an open source hardware company, is selling a $400 tablet starter kit. The DIY tablet targets developers who want to create a tablet of their dreams or write specialized software applications.

“The Beagle tablet is a portable modular open source handheld computer,” says Justin Huynh, director of product development at Liquidware. “It’s all about customizability and embedded development.”

The tablet kit contains a 4.3-inch OLED touchscreen that mounts directly on a BeagleBoard. The BeagleBoard is a single board computer from Texas Instruments that comes with a 1-GHz processor. There’s also a battery module and a 4-GB pre-formatted SD card to boot Angstrom Linux. But users can also run the Android operating system on it, says Huynh.

“Everything is modular and snaps on or mounts directly on a board so you have a very compact tablet-like device,” he says.

Since Apple iPad’s debut in April, tablets’ popularity has surged. Apple sold 2 million iPads in just 60 days of the product’s launch. That has left other companies scrambling to introduce tablets of their own. Both Samsung and Research In Motion have tablets in development. In the U.K., Dell has already introduced its first tablet called Streak, a 5-inch PSP-sized device that can also make phone calls.

But those gadgets have little appeal for tinkerers, says Huynh.

“With the iPad, you would have a hard time hacking it to read from a specialized sensor such as a temperature sensor or add your own custom hardware,” he says. “The Beagle tablet is all about innovation.”

Since the Beagle tablet doesn’t have any storage beyond the SD card, it is extremely lightweight, weighing just about 8 ounces. Users can increase the size of the SD card or plug in an external hard drive or a solid-state disk through the on-board USB port.

The battery life of the Beagle tablet can vary from three hours to six hours depending on the application, says Hyunh.

The Beagle tablet is a lot of work since you would have to load everything from an OS to different applications. But once you get it going, it could be a better conversation starter than the iPad.

See Also:

Photo: Liquidware


MSI X340 reborn as DIY carbon fiber tablet, watch it stream YouTube at 720p (video)

Tired of touchscreen tablets that lack speed, a usable UI, or support for a certain streaming video format that will go unnamed? As one of our favorite sayings goes, if you want it done right, do it yourself. One Engadget reader took that idea to heart in crafting the 13.4-inch carbon fiber contraption you see above, imbuing it with enough high-end netbook parts to run Windows 7 at a brisk pace and play 720p video on its large, resistive touchscreen. Starting with the guts of an MSI X320, adding an accelerometer and 40GB solid state drive and finally sandwiching a random Chinese digitizer on top, the whole 1.6GHz Atom Z530 machine cost him under $700 in parts. For that price, we’re sure many of you would be happy to follow in his footsteps, but if not, by all means continue complaining to your tablet manufacturer of choice. We have another favorite saying: the squeaky wheel gets the grease. Video after the break; Q&A with the creator at our more coverage link.

Continue reading MSI X340 reborn as DIY carbon fiber tablet, watch it stream YouTube at 720p (video)

MSI X340 reborn as DIY carbon fiber tablet, watch it stream YouTube at 720p (video) originally appeared on Engadget on Fri, 28 May 2010 15:25:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceCarbon Tablet  | Email this | Comments

Students accelerate cubicle arms race with PlayStation Eye-tracked, iPhone-guided coilgun (video)

DIY weaponry gets more lethal with each passing year; where once we were content with a simple foam missile launcher, technology has progressed such that our automated turrets now spew screwdriver bits, airsoft and paintballs. As progress forges ahead, two engineering students at the University of Arkansas have added injury to insult with this four-stage DIY coilgun. Using an Arduino microcontroller to actuate the firing mechanism and steer the monstrous wooden frame, they nimbly control the badass kit with an iDevice over WiFi, and line up targets using a repurposed PlayStation Eye webcam. While we’d of course prefer to have our phone SSH into the gun over 3G, we’re not going to argue with success. We’d like to keep our lungs un-perforated, thank you very much. See it in action after the break.

Continue reading Students accelerate cubicle arms race with PlayStation Eye-tracked, iPhone-guided coilgun (video)

Students accelerate cubicle arms race with PlayStation Eye-tracked, iPhone-guided coilgun (video) originally appeared on Engadget on Wed, 19 May 2010 07:37:00 EDT. Please see our terms for use of feeds.

Permalink PC World  |  sourceHack A Day  | Email this | Comments

Canon DSLR shutter remote hacked into Atari joystick

Just point and shoot.

Video after the break.

Continue reading Canon DSLR shutter remote hacked into Atari joystick

Canon DSLR shutter remote hacked into Atari joystick originally appeared on Engadget on Mon, 17 May 2010 03:18:00 EST. Please see our terms for use of feeds.

Permalink Gizmodo  |  sourceThiago Avancini  | Email this | Comments

Students program Human Tetris into 8-bit microcontroller, give away schematics for free (video)

Sure, Project Natal is the hotness and a little bird tells us PlayStation Move is pretty bodacious, but you don’t have to buy a fancy game console to sooth your motion-tracking blues. When students at Cornell University wanted to play Human Tetris (and ace a final project to boot), they taught a 20Mhz, 8-bit microcontroller how to follow their moves. Combined with an NTSC camera, the resulting system can display a 39 x 60 pixel space at 24 frames per second, apparently enough to slot your body into some grooves — and as you’ll see in videos after the break, it plays a mean game of Breakout, too. Full codebase and plans to build your own at the source link. Eat your heart out, geeks.

Continue reading Students program Human Tetris into 8-bit microcontroller, give away schematics for free (video)

Students program Human Tetris into 8-bit microcontroller, give away schematics for free (video) originally appeared on Engadget on Sun, 16 May 2010 07:04:00 EST. Please see our terms for use of feeds.

Permalink   |  sourceHuman Tetris  | Email this | Comments

Auto-dimming electrochromic panels reduce glare when driving (video)

It’s rush hour, and you’re headed due West on your evening commute — the sun burning holes in your eyes. You could flip down a window visor, trading your field of view for visibility. Or, with a prototype shown off at Intel’s 2010 International Science and Engineering Fair, you could simply let the windshield darken on its own. Two San Diego students (both accustomed to copious amounts of sunshine) rigged a Toyota Prius to do just that by stringing up electrochromic panels, which dim when voltage is applied. The trick is figuring out when and where to apply it, because when the sun is shining the panels themselves all receive the same amount of light. So instead of gauging it at the glass, Aaron Schild and Rafael Cosman found that an ultrasonic range finder could track the driver’s position while a VGA webcam measured the light coming through, and darken the sections liable to cause the most eyestrain. We saw a prototype in person, and it most certainly works… albeit slowly. If you’re rearing to roll your own, it seems raw materials are reasonably affordable — Schild told us electrochromic segments cost $0.25 per square inch — but you may not need to DIY. Having won $4,000 in prize money at the Fair, the teens say they intend to commercialize the technology, and envision it natively embedded in window glass in the not-too-distant future. Here’s hoping GM gives them a call. See pics of the Prius below, or check out a video demo of their prototype right after the break.

Continue reading Auto-dimming electrochromic panels reduce glare when driving (video)

Auto-dimming electrochromic panels reduce glare when driving (video) originally appeared on Engadget on Sat, 15 May 2010 12:03:00 EST. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments

Student moves quadriplegics with Wiimote wheelchair control (video)

There were certainly a couple whiz kids at Intel’s International Science and Engineering Fair this year, but high school senior John Hinckel’s a regular MacGyver: he built a wheelchair remote control out of a couple sheets of transparent plastic, four sliding furniture rails and some string. A Nintendo Wiimote goes in your hat and tells the whole system what to do — simply tilt your head in any direction, and accelerometer readings are sent over Bluetooth. The receiving laptop activates microcontrollers, directing servo motors to pull the strings, and acrylic gates push the joystick accordingly to steer your vehicle. We tried on the headset for ourselves and came away fairly impressed — it’s no mind control, but for $534 in parts, it just might do. Apparently, we weren’t the only ones who thought so, as patents are pending, and a manufacturer of wheelchair control systems has already expressed interest in commercializing the idea. See the young inventor show it off after the break.

Continue reading Student moves quadriplegics with Wiimote wheelchair control (video)

Student moves quadriplegics with Wiimote wheelchair control (video) originally appeared on Engadget on Fri, 14 May 2010 08:51:00 EST. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments